Lexmark C782n XL User Manual
Here you can view all the pages of manual Lexmark C782n XL User Manual. The Lexmark manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 31
Printing a menu settings page 31 Printing 4Double-click the printer you selected when you sent the job. A list of print jobs appears in the printer window. 5Select the job you want to cancel. 6Press the Delete key on the keyboard. Canceling a job from a Macintosh computer Canceling a job from a Macintosh computer running Mac OS 9.x When you send a job to print, the printer icon for your selected printer appears on the desktop. 1Double-click the printer icon on your desktop. A list of print jobs appears...
Page 32
Printing a font sample list 32 Printing 4Press until Network Setup Page appears, and then press . Note:If an optional MarkNet N8000 series internal print server is installed, Print Net1 Setup appears on the display. 5Check the first section on the network setup page, and confirm that Status is “Connected.” If Status is “Not Connected”, the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and print another network setup page to...
Page 33
Loading the trays 33 Printing Loading the trays Helpful hints: •Never mix media types within a tray. •Flex the print media back and forth to loosen the sheets, and then fan them. Do not fold or crease the print media. Straighten the edges of the stack on a level surface. Warning:Never remove paper trays while a print job is printing. It could damage the tray or the printer. Loading 500-sheet trays To load any of the 500-sheet trays: 1Remove the tray and place it on a flat, level surface. 2Squeeze the...
Page 34
Loading the trays 34 Printing 4Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges of the stack on a level surface. 5Place the paper in the tray as shown, print side down. Do not load bent or wrinkled paper. Note:Do not exceed the maximum stack height. Overfilling the tray may cause jams. 6Squeeze the front guide lever and slide the guide until it firmly touches the stack of paper. 7Reinstall the tray. Make sure the tray is pushed...
Page 35
Loading the trays 35 Printing Loading the 2000-sheet tray Follow these instructions to load a 2000-sheet tray. Do not load any print media other than paper in the 2000-sheet tray. 1Pull open the tray. 2Squeeze the side guide lever, lift the guide, and place it into the appropriate slot for the size paper you are loading. 3Squeeze the two front guide levers and slide the guide to the correct position for the size paper you are loading. LT.LGLT.LGEXEX A4A4B5B5A5A5 Downloaded From ManualsPrinter.com Manuals
Page 36
Loading the trays 36 Printing 4Slide the bottom support toward the front of the tray until it touches the front guide. 5Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges of the stack on a level surface. 6Place the paper against the back left corner of the tray, print side down. Do not load bent or wrinkled print media. 7Close the tray. Make sure the tray is pushed completely into the printer. Note:Do not exceed the maximum stack...
Page 37
Loading the multipurpose feeder 37 Printing Loading the multipurpose feeder You can use the multipurpose feeder one of two ways: • Paper tray—As a paper tray, you can load paper or specialty media in the feeder with the intention of leaving the media in the feeder. •Manual bypass feeder—As a manual bypass feeder, you send a print job to the feeder while specifying the type and size of media from your computer. The printer then prompts you to load the appropriate print media before it prints. To load...
Page 38
Loading the multipurpose feeder 38 Printing 4Arrange the stack of paper or specialty media correctly for the size, type, and print method you are using. 5Place the paper or specialty media, print side up, along the left side of the multipurpose feeder, and then push it in as far as it will easily go. Do not force the media. Note:Do not exceed the maximum stack height. Overfilling the feeder may cause jams. 6Squeeze the paper guide lever and slide the guide until it lightly touches the side of the...
Page 39
Printing on specialty media (transparencies, labels, other) 39 Printing Printing on specialty media (transparencies, labels, other) Follow these instructions when you want to print on media such as transparencies, card stock, glossy paper, labels, or envelopes. 1Load the media as specified for the tray you are using. For help, see any of the following: – Loading the trays –Loading the multipurpose feeder 2 Set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type)...
Page 40
Linking trays 40 Printing Mac OS 9.x 1In your word processor, spreadsheet, browser, or other application, select File Page Setup. 2Choose the correct printer in the Format For pop-up menu. 3Choose the paper size from the Paper pop-up menu. 4Click OK. 5Select File Print. 6Select the General panel, and then choose the paper source from the pop-up menus as appropriate. 7Select the Paper panel, and then choose the paper type from the Paper Type pop-up menu. 8Send your print job as usual. Mac OS X 1In your...