Lexmark C 950 Service Manual

Diagnostic information 2-21
  5058-030
Go Back Previous
Next
200.05 
Paper jamSensor (registration) lag jam The media reached the sensor 
(registration) but did not clear it within the 
specified time.
Go to “200.05/200.55 Sensor 
(registration) lag jam” on page 2-88.
200.53 
Paper jamSensor (registration) late jam 
80K interval for feed rollers exceeded 
in tray 1The media is late reaching the sensor 
(registration) within the specified time after 
being fed from any given media tray.
Go to “200.53...

2-22  Service Manual 5058-030  
Go Back Previous
Next
203.03 
Paper jamSensor (upper redrive) late jam The media is late reaching the sensor 
(upper redrive) within the specified time 
after reaching the sensor (fuser exit).
Go to “203.03 Sensor (upper redrive) 
late jam” on page 2-102.
203.05 
Paper jamSensor (upper redrive) lag jam The media reached the sensor (upper 
redrive) but did not clear it within the 
specified time.
Go to “203.05 Sensor (upper redrive) lag 
jam” on page 2-104.
230.01 
Paper...

Diagnostic information 2-23
  5058-030
Go Back Previous
Next
243.03 
Paper jamSensor  (tray 3 feed  out)  late jam The media is late reaching the sensor (tray 
3 feed out) within the specified time after 
the feed from tray 4 has started.
Go to “243.03/243.06 Sensor (tray 3 feed 
out) late jam” on page 2-113.
243.06 
Paper jamSensor (tray 3 feed out) failed to pick 
jamThe media is late reaching the sensor (tray 
3 feed out) within the specified time after 
the feed from tray 4 has started.
Go to...

2-24  Service Manual 5058-030  
Go Back Previous
Next
250.05 
Paper jamSensor (MPF feed out) lag jam The media reached the sensor (MPF feed 
out) but did not clear it within the specified 
time.
Go to “250.05 Sensor (MPF feed out) lag 
jam” on page 2-127.
250.06 
Paper jamSensor (MPF feed out) failed to pick 
jamThe media is late reaching the sensor 
(MPF feed out) within the specified time 
after the feed from the MPF has started.
Go to “250.06 Sensor (MPF feed out) 
late jam” on page 2-131.
250.56...

Diagnostic information 2-25
  5058-030
Go Back Previous
Next
381.03  
Service finisher errorSensor (rear tamper HP) late error The sensor (rear tamper HP) did not 
activate within the specified time.
Go to “381.03 Sensor (rear tamper HP) 
late jam” on page 2-140.
381.04  
Service finisher errorSensor (rear tamper HP) lag error The sensor (rear tamper HP) activated, but 
did not clear within the specified time.
Go to “381.04 Sensor (rear tamper HP) 
lag jam” on page 2-141.
381.05  
Service finisher...

2-26  Service Manual 5058-030  
Go Back Previous
Next
381.13  
Service finisher errorSensor (stacker bin upper limit) error The media level exceeds the height that is 
allowed by the sensor (stacker upper limit).
Go to “381.13 Sensor (stacker bin upper 
limit) error” on page 2-151.
381.14  
Service finisher errorSensor (stacker bin no media) error The media level doesn’t reach the height 
that is allowed by the sensor (stacker bin 
no media).
Go to “381.14 Sensor (stacker bin no 
media) error” on page...

Diagnostic information 2-27
  5058-030
Go Back Previous
Next
381.22 
Service finisher errorSensor (punch carriage shift HP) late 
errorThe sensor (punch carriage shift HP) didn’t 
activate within the specified time.
Go to “381.18 Sensor (punch carriage 
shift HP) late jam” on page 2-159.
381.23 
Service finisher errorSensor (punch cam HP) lag error The sensor (punch cam HP) activated, but 
did not clear within the specified time.
Go to “381.17 Sensor (punch cam HP) 
lag jam” on page 2-158.
381.26...

2-28  Service Manual 5058-030  
Go Back Previous
Next
381.34 
Service finisher errorSensor (booklet rear tamper HP) lag 
errorThe sensor (booklet rear tamper HP) 
activated, but did not clear within the 
specified time.
Go to “381.34 Sensor (booklet rear 
tamper HP) lag jam” on page 2-169.
381.35 
Service finisher errorSensor (booklet knife folding) failure The sensor (booklet knife folding) 
activated, but did not clear within the 
specified time.
Go to “381.35 Sensor (booklet knife 
folding) failure”...

Diagnostic information 2-29
  5058-030
Go Back Previous
Next
4xx service error codes
Error code Description Action
401.01  
Service finisher errorSensor (finisher media entrance) static 
jam.Media remains detected by the sensor 
(finisher media entrance).
Go to “401.01 Sensor (finisher media 
entrance) static jam” on page 2-179.
401.03  
Service finisher errorSensor (bridge media entrance) late 
jamThe media is late reaching the sensor 
(bridge unit media entrance) within the 
specified time.
Go to...

2-30  Service Manual 5058-030  
Go Back Previous
Next
483.03  
Service finisher errorSensor (buffer path) late jam The media is late reaching the sensor 
(diverter gate) within the specified time.
Go to “483.03 Sensor (buffer path) late 
jam” on page 2-190.
484.01  
Service finisher errorSensor (compiler media present) static 
jamMedia remains detected by the sensor 
(stacker bin no media).
Go to “484.01 Sensor (compiler media 
present) static jam” on page 2-192.
485.01 
Service finisher errorSensor...