Lexmark C 746 Service Manual

Repair information4-35
 5026
Go Back Previous
Next
4.Pull open the UICC connector and disconnect the UICC cable.
Installation note:  Make sure the contact pins on the cable are facing up when reconnecting the operator 
panel cable to the connector.
5.Flip open the LCD connector and disconnect the LCD cable. 

4-36Service Manual 5026 
Go Back Previous
Next
6.Remove the six screws (B) securing the operator panel card, then remove the operator panel card.
7.Remove the three screws (C) securing the LCD bracket, then remove the LCD bracket.
8.Remove the operator panel LCD together with the LCD protector.
B
C 

Repair information4-37
 5026
Go Back Previous
Next
9.Remove the operator panel LCD from the LCD protector.
Note:  The operator panel assembly consist of the operator panel LCD and the operator panel card.
Operator panel assembly removal (C748)
See operator panel assembly with card on page 7-3 for the part number. 
Warning:  This part might contain customer confidential information. See “Data Security Notice” on page 4-1 
for more details. After removing this part, return it to your next level of support...

4-38Service Manual 5026 
Go Back Previous
Next
3.Remove the eight screws (A) securing the position guide cover.
4.Pull open the operator panel connector and disconnect the operator panel cable.
Installation note:  Make sure the contact pins on the cable are facing up when reconnecting the operator 
panel cable to the connector.
A 

Repair information4-39
 5026
Go Back Previous
Next
5.Flip open the LCD connector and disconnect the LCD cable.
6.Remove the five screws (B) securing the operator panel card, then remove the operator panel card.
B 

4-40Service Manual 5026 
Go Back Previous
Next
7.Remove the four screws (C) securing the LCD bracket.
8.Remove the LCD bracket and ground connector.
9.Remove the operator panel LCD.
C 

Repair information4-41
 5026
Go Back Previous
Next
Operator panel bezel removal
See operator panel bezel on page 7-3 for the part number.
1.Open the front cover.
2.Pry the bezel using a flat-head screw driver to remove.
Operator panel buttons removal (C746)
1.Remove the top access door cover assembly. See “Top access cover assembly removal” on 
page 4-54.
2.Turn the top access cover assembly over.
3.Remove the eight screws (A) securing the position guide cover.
A 

4-42Service Manual 5026 
Go Back Previous
Next
4.Remove the six screws (B) securing the operator panel card, then remove the operator panel card.
5.Unsnap the small latches securing the buttons, then remove them.
B 

Repair information4-43
 5026
Go Back Previous
Next
Operator panel buttons removal (C748)
1.Remove the top access door cover assembly. See “Top access cover assembly removal” on 
page 4-54.
2.Turn the top access cover assembly over.
3.Remove the eight screws (A) securing the position guide cover.
4.Remove the five screws (B) securing the operator panel card, then remove the operator panel card.
A
B 

4-44Service Manual 5026 
Go Back Previous
Next
5.Unsnap the small latches securing the buttons, then remove them.