Lenovo Thinkvision L220x Users Guide

Remove the Hook from the back of the stand.
Rotate the head of the monitor into portrait view.
Chapter 1. Getting started1-7
 

Place the cables through the Main Clip. Then fasten the clip.
Wrap the Cable Wapper around the cables.
1-8L220x Wide Flat Panel Monitor User’s Guide
 

Replace the Hook.
Replace the Cable Cover.
Chapter 1. Getting started1-9
 

Power on the monitor and the computer.
To install the monitor driver, insert the Reference and Driver CD, click Install
driver , and follow the on-screen instructions.
To optimize your monitor image, if using the analog cable, press the Automatic
Image Setup key. Automatic image setup requires that the monitor is warmed up for
at least 15 minutes. This is not required if you are using the DVI cable.
Note:If automatic image setup does not establish the image that you prefer, perform
manual image setup....

Chapter 1. Getting started1-11
Registering your option
Thank you for purchasing this Lenovo™ product. Please take a few mome\
nts to
register your product and provide us with information that will help Len\
ovo to better
serve you in the future. Your feedback is valuable to us in developing products and
services that are important to you, as well as in developing better ways\
 to
communicate with you. Register your option on the followingWeb site:
http://www.lenovo.com/register
Lenovo will send you...

Chapter 2. Adjusting and using your monitor
This section will give you information on adjusting and using your monit\
or.
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal \
computer
and to avoid discomfort. Arrange your workplace and the equipment you use to suit
your individual needs and the kind of work that you perform. In addition\
, use healthy
work habits to maximize your performance and comfort while using your co\
mputer.
For more detailed...

· Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen\
content and to accommodate your preferred head and neck posture.
· General location : Position your monitor to avoid glare or reflections on the
screen from overhead lighting or nearby windows.
The following are some other tips for comfortable viewing of your monito\
r:
· Use adequate lighting for the type of work you are performing.
· Use the monitor brightness, contrast, and image adjustment controls, if \
equipped,
to...

Accessibility information
Lenovo is committed to providing greater access to information and techn\
ology to
people with disabilities. With assistive technologies, users can access information in
the way most appropriate to their disability. Some of these technologies are already
provided in your operating system; others can be purchased through vendo\
rs or
accessed at: http://www.ibm.com/able/
Adjusting your monitor image
This section describes the user control features used to adjust your mon\
itor...

To use the controls:1. Press 
 to open the main OSD menu.
2. Use 
 or  to move among the icons. Select an icon and press  to access that
function. If there is a sub-menu, you can move between options using 
 or  ,
then press 
 to select that function. Use  or  to make adjustments. Press  to
save.
3. Press 
 to move backwards through the sub-menus and exit from the OSD.
4. Press and hold 
 for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press 
 and hold for 10 seconds...

Table 2-2. OSD functions
·
·
·
·
·
·
·
·
·
2-5L220x Wide Flat Panel Monitor User’s Guide
OSD  Icon
on Main Menu Submenu Description Controls and
Adjus tme nts(Analog) Controls
and
Adjus tme nts (Digital)
Brightne ss - /Contrast Brightne ss
Adjusts overall brightness Same as
Analog
Contrast Adjusts difference between light and dark areas
Image
Position Horizontal Position Moves the image left or right. Controls
Lo ck ed not
required for
d igit a l inp ut
Vertical Position Moves the image up or down....