Lenovo Thinkvision L220x Users Guide

L220x Wide Flat P anel Monitor
Users Guide
 

© Copyright Lenovo 2007.i
Product numbers
4433-HB2
 First Edition (September 2007)
© Copyright Lenovo 2007.
All rights reserved.
LENOVO products, data, computer software, and services have been develop\
ed exclusively at private expense and are
sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use,
reproduction and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or s\
ervices are delivered...

Contents
Safety information........................................................................\
................................. iii
Chapter 1. Getting st arted ........................................................................\
................. 1-1
Shipping contents........................................................................\
...................................... ............................................ 1-1
Product overview...

Safety information
© Copyright Lenovo 2007.iii
 

Chapter 1. Getting started
This User’s Guide contains detailed information on the ThinkVision™ L220x Wide
Flat Panel Monitor. For a quick overview, please see the Setup Poster that was
shipped with your monitor.
Shipping contents
The product package should include the following items:· Setup Poster
· Monitor Safety, Troubleshooting, and Warranty Guide
· Reference and Driver CD
· ThinkVision L220x Wide Flat Panel Monitor
· Power Cord
· Digital Cable - Attached to monitor
· Analog Signal Cable
· USB...

1-2L220x Wide Flat Panel Monitor User’s Guide
Product overview
This section will provide information on adjusting monitor positions, se\
tting user
controls, and using the cable lock slot.
Types of adjustments
Tilt
Please see the illustration below for an example of the tilt range.
Swivel
With the built-in pedestal, you can tilt and swivel the monitor for the m\
ost
comfortable viewing angle.
   
 -45o                                             45o
 

Monitor Pivot
90O
 
- Adjust height to the top position before rotation the monitor.
- Rotate clockwise until the monitor stops at 90°
.
User controls
Your monitor has controls on the front which are used to adjust the displ\
ay.
For information on how to use these controls, please see
“Adjusting your monitor image” on page 2-3.
Chapter 1. Getting started1-3
110mm
Height Adjustment
After pressing the top of the monitor, remove the fixed pin and adjust the height of
the monitor.
 

Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note:Be sure to read the Safety Information located in the  Monitor Safety,
Troubleshooting, and Warranty Guide  before carrying out this procedure.
1. Power off your computer and all attached devices, and unplug the compute\
r power cord.
2. Connect the digital signal cable to the video port on the back of the co\
mputer.
Note: One end of the signal cable is already...

Connect the analog signal cable to the D-SUB connector of the monitor an\
d the
other end on the back of the computer.
Connect one end of the USB hub cable to the USB connector on the back of\
 the
computer, and the other end to the upstream USB connector on the monitor.
Chapter 1. Getting started1-5
 

Plug the monitor power cord and the computer cord into grounded electric\
al outlets.
Note : An approved power cord H05VV-F, 3G, 0.75mm2 must be used.
Remove the Cable Cover from the back of the stand.
         
1-6L220x Wide Flat Panel Monitor User’s Guide