Land Rover Testbook Rover Manual

							DIAGNOSTICS
22 
						

							DIAGNOSTICS
23 
						

							DIAGNOSTICS
24 
						

							DIAGNOSTICS
25 
						

							DIAGNOSTICS
26 
						

							DIAGNOSTICS
27 
						

							DIAGNOSTICS
28
TESTBOOK ERROR CODES
When using TestBook, you may occasionally
experience a situation where its operation is
interrupted by some kind of internal hiccup, and an
Error Code appears on screen.
The following tables tell you how to respond to each
error code.TestBook RDS Error Codes
The Error code will appear in the format :
DTOOxxMX, where xx represents the number of
the code from 1 to 41; for example DTOO15MX is
shown on the table as error code 15. Against each
error code number there is a matching Action
instruction or instruction key number - refer to the
key below for details of the action to take.
Error code number Action
13
23
33
41
51
61
72
82
92
10 2
11 3
12 3
13 1
14 3
15 1
16 1
17 3
18 3
19 2
20 221 3
22 3
23 3
24 Printer; check paper,
cables etc.
25 3
26 3
27 3
28 3
29 3
30 3
31 3
32 3
33 3
34 3
35 3
36 3
37 3
38 3
39 3
40 3
41 3
Action Key :
1.Restart TestBook and try operation again. If
this fails, try the operation on another vehicle. If
this still does not work, retry using a different
TestBook.
2.First, try operation again, without rebooting. If
this fails, reboot and try again. If this in turn
fails, try another CD. If this clears the problem,
then the original CD was causing the fault. If
the fault remains, then the problems in the
TestBook.3.Fill in a Help Desk Information Sheet with all
details including the error code and contact the
Help Desk. 
						

							HELP DESK
CONTENTS
Page
DEALER CHECK LIST (BEFORE YOU RING) 1.........................................................
LOCAL TELEPHONE NUMBERS 2............................................................................
TESTBOOK EXCHANGE SERVICE
HELP DESK 3..............................................................................................................
EXCHANGE TIMES 4..................................................................................................
DEALER RESPONSIBILITIES 4..................................................................................
SERVICE LEVEL 5......................................................................................................
TESTBOOK EXCHANGE MATRIX 7...........................................................................
TESTBOOK CABLES 8...............................................................................................
NOTES9 ..................................................................................................................... 
						

							HELP DESK
1
DEALER CHECK LIST (BEFORE YOU RING)
HELP US TO HELP YOU
If you have run into a problem when using TestBook,
and you are unable to resolve it by repeating the
procedure or by consulting TestBook literature
and/or the Help screens, the next stage is :
Fill in a Help Desk Information Sheet (an example is
shown on a following page)
Telephone the Helpdesk using the information
sheet for reference
The Helpdesk may request you to fax this sheet to
them, therefore, it is vital that every section of the
Information Sheet is filled in accurately before it is
transmitted. If just one small detail is missed out or
changed slightly, it could make the difference
between getting a solution to your problem in
minutes - or days !
TestBook has the capability to print a Help Desk
information sheet with certain sections automatically
completed. Pressing the Help Desk button on the
Welcome Screen automatically prints a Help Desk
sheet with six sections filled in. These six sections
are the ones taken from the Dealer Information
entered in Configuration.
They are :
1.Dealer Name
2.Corporate ID
3.Telephone Number
4.Fax Number
5.Contact 1
6.TestBook Serial/Model Number
If an RDS error occurs, the Fault Notification box has
a Help Desk button on it. Pressing this completes
the six sections mentioned previously and the
following sections aswell :
Data CD Reference Number
RDS Release Number
Screen Reference/Node ID
Error Message Displayed
The following sectionsMUSTalso be completed.Vehicle Details and Reported Fault
This should include the exact vehicle model,
derivative, model year and VIN, plus any component
numbers or codes relevant to the area of the vehicle
being worked on. When combined with details of the
reported fault that you are trying to diagnose, this
may give TestBook engineers a short cut to a
solution based on previous experience.
Full details of Test being used
This information is vital to a TestBook engineer who
is trying to reproduce and solve the problem.
Some diagnostics can be reached via several
different paths. It is vital that the TestBook engineers
follow exactly the same diagnostic trail as you. It
would help a great deal if you made a note of each
screen where you made a decision, so the engineer
can follow exactly the same path.
For example:
Select Diagnostic System
Select Security
Select Locking/Unlocking
Continue the path until you reach the screen with the
fault.
Full details of any difficulties you’ve had using
TestBook
It may be useful to TestBook engineers to know of
any difficulties that you have experienced when
using your TestBook.
Cabling Drawing Reference used
It is essential to use the right cables for a given test
procedure. By giving the details of the Cabling
Drawing Reference (e.g. A, AA etc. to Z, or 1 to 19)
that you used to assemble the TestBook connecting
cables, you will enable the TestBook engineers to
check that these are correct before looking for other
problems.
NOTE: If the TestBook screen on which
your problem occurred is one of those
that can be printed, please print it off and
fax it through to the Help Desk with your
Information Sheet . The more information you
can give the Help Desk, the faster they can help
you.