Land Rover Range Rover In Car Entertainment Lm 2nd Edition Rover Manual

Minidisc Player Operation
30
Min id isc P la ye r Op eratio nMINIDISC P LA YER  CO NTRO LS*
1. EJECT Button
Press to eject installed media, Cassette, MD or 
CD.
2. Media slot with dust flap
Insert media for playback into this slot.
3. Display
Displays information on waveband, name of RDS 
stations, programme, frequency, DSP sound 
memory, cassette, MD and CD functions, tone 
settings, time and date.
13. Function keys
Press to select functions from the display (14).
14. Function Key Display
Displays...

31
Minidisc Player Operation
Starting and stopping an MD
Starting
1. Switch unit on. (See ‘Switch On/off’, page 8).
2. Insert the MD in the MiniDisc slot (2) with the 
arrow upwards and pointing towards the player.
If there is already an MD in the MiniDisc slot (2):
Start to play the disc by pressing the function key 
(13) below MODE (14) until TR appears in the 
display (3).
NOTE: As the player first needs to read in data 
from the MD, there is a slight delay before it 
starts to play.
Stopping
Press...

Minidisc Player Operation
32
Random Play
The tracks on the MD can be played in an entirely 
random order.
Press the function key (13) below RND (14). 
The display (3) shows RND and the number of 
the track on the MD.
NOTE: You can operate the buttons for skipping 
tracks and fast forward/rewind during random 
play. This enables you to skip a track that you do 
not want to listen to.
Stopping random play
Press the function key (13) below RND (14).
The random play function is interrupted and the 
MD plays...

33
Single CD Player Operation
Single CD Player OperationSIN GLE  CD  P LAY ER  C O NTR O LS*
1. EJECT Button
Press to eject installed media, Cassette, MD or 
CD.
2. Media slot with dust flap
Insert media for playback into this slot.
3. Display
Displays information on waveband, name of RDS 
stations, programme, frequency, DSP sound 
memory, cassette, MD and CD functions, tone 
settings, time and date.
13. Function keys
Press to select functions from the display (14).
14. Function Key Display
Displays...

Single CD Player Operation
34
Starting and stopping a CD
Starting
1. Switch unit on. (See ‘Switch On/off ’, page 8 ).
2. Insert the CD into the CD slot (2) with the label 
side uppermost.
If there is already a CD in the slot (2):
Start to play the disc by pressing the function key 
(13) below  MODE (14) until TR appears in the 
display (3).
Stopping
Press the CD eject button (1).
The CD is ejected a short way out of the CD slot 
(2) and the audio source switches to radio (FM)
or switch off the unit, (See...

35
Single CD Player Operation
Random Play
The tracks on the CD are played in an entirely 
random order.
Press the function key (13) below RND (14) and 
the display (3) shows RND and the number of 
the track on the CD.
NOTE: You can operate the buttons for skipping 
tracks and fast forward/reverse during random 
play. This enables you to skip a track that you do 
not want to listen to.
Stopping random play
Press the function key (13) below RND (14).
The random play function is interrupted and the 
CD...

CD Changer Operation
36
CD C han ger Op eratio nLoca ting  t he CD C han ger*
The CD changer for six CDs is installed in the 
glovebox compartment. 
Removing the CD magazine
To load or empty it, the CD magazine has to be 
removed from the CD changer. 
Slide the access panel to the right and press the 
magazine eject button.
The magazine will slide out and can  then be 
removed.
Filling/Emptying the CD magazine
NOTE: When adding CDs to or removing them 
from the CD magazine, hold them only at the 
edge...

37
CD Changer Operation
Operating temperatures
NOTE: Only use the CD changer at temperatures 
between -15 C and +60 C, otherwise it may 
malfunction.
Even when switched off, the unit should not be 
exposed to temperatures beyond -25 C and 
+85C.
Atmospheric humidity
A high level of humidity inside the device may 
cause the laser beam focusing lens to fog over 
and prevent the CD from being played.
Precautions when using Laser equipment
The CD changer is officially designated a Class 1 
laser product....

CD Changer Operation
38
Sampling and selecting (Scan)
All tracks on the CD are automatically sampled 
briefly in succession.
Press the function key (13) below SC (14) to 
start sampling.
To select a track, press the function key (13) 
below SC (14).
The scan function is interrupted and the CD plays 
from the point reached.
Random Play
The tracks on the CD are played in an entirely 
random order.
Press the function key (13) below RND (14) and 
the display (3) shows RND and the number of 
the track on the...

39
Caring for Compact and MiniDiscs
Caring for Compact and  MiniDiscs
CARING FOR COMPACT AND MINIDISCS
Dirt, dust, condensation and heat can damage 
discs. Always observe the following precautions:
NEVER touch the horizontal playing surface (the 
unlabelled side) of a disc! Handle discs by 
holding the outer edges, or the edge of the 
central hole and the outer edge, between finger 
and thumb.
ALWAYS return discs to their boxes after use 
(dirt detracts from the sound quality).NEVER leave the disc or the...