Land Rover Range Rover In Car Entertainment Lm 2nd Edition Rover Manual

In-Car Entertainment
NRRICEv2  28/11/01  10:24 am  Page 1 

As part of Land Rover environmental policy, this publication is printed on paper made from chlorine free pulp.
In-Car Entertainment
Publication Part No. LRL 0455ENG-2nd edition
© Land Rover  2002
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, electronic, mechanical, 
recording or other means without prior written permission from Land Rover. 

In-Car Entertainment (ICE) Handbook
For your convenience, this (ICE) handbook is divided into sections, each dealing with a different 
aspect of the unit. These are listed on the title page and you will find it worthwhile to take a little 
time to read each one, and get to know your ICE unit as soon as you possibly can. 
The specification of each vehicle will vary according to territorial requirements and also from 
model to model within the vehicle range. Some of the information published in this...

Contents
Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Computer Functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Radio Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Radio Reception  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Introduction
4
Audio Syste m Con trols
In trod uctionTHE SYSTEM
Your ICE system offers many functions which 
will make your journeys safer and more of a 
pleasure.
Your system has the following specification:
1.On-board computer. 
2.Radio with cassette player.
Further equipment which can be specified:
1.Car telephone with voice recognition.
2.Single play CD.
3.Minidisc player
4.CD changer.
5.Digital sound processing system.
6.Code for engine interlock.
7.Auxiliary fuel-burning heater/independent...

5
Introduction
UNIT CONTROLS
1. EJECT button
Press to eject installed media, Cassette, MiniDisc 
(MD) or CD.
2. Media slot with dust flap
Insert media for playback into this slot.
3. Display
Displays information on waveband, name of RDS 
stations, programme, frequency, DSP sound 
memory, cassette, MD, CD and telephone 
functions, tone settings, time and date.
4. TONE button
Press to alter settings for: Tone, Speed 
dependent volume control, Volume of traffic 
reports, and Programme type display.
5. AUDIO...

Introduction
6
11. Clock
Press to access setting functions for the digital 
clock.
12. Send/End button*
This button has three primary functions:
•Press to accept incoming call.
•Press to dial telephone number/memory that 
is shown on the display (3).
•Press to terminate telephone call. (Note that 
the green LED (8) will extinguish to confirm 
end of call.
13. Function keys
Press to select functions from the display (14).
14. Function key display
Displays functions and options assigned to the 
Function...

7
Introduction
Multi-Information Display
Operating principle
In addition to audio system control, this unit is 
also used for setting the clock and computer 
functions and, where fitted, operating the 
telephone.
The display (3) consists of two parts, the lower of 
which (Function key display 14) is divided into 
six areas.
One or two functions can be displayed in each of 
these six areas. The functions change according 
to the feature to which the display relates.
Example display for radio mode.
Example...

General Operation
8
General Operation
General Operation GENERAL OPERATION
Switch On/off
Press the On/off, volume rotary control (15).
The set selects the audio source last used
(Radio, MD, CD or Cassette). 
Listening to Radio with the ignition 
switched off
With the ignition switched off, (ignition key 
turned to position 0 or removed), the radio 
functions remain available for approximately 
20 minutes.
When the ignition is switched off, the unit is also 
switched off.
To switch the unit on again, press...

9
General Operation
Activating the tone menu
Press the Tone (4) or Audio (5) buttons to 
activate the tone menu.
The following functions can be requested: 
Bass,Treble, Balance, Fader and Linear.
To access a particular tone function, press the 
function key (13) below the desired tone (14).
Adjusting tone settings
Adjust the desired tone by pressing once or 
holding the function key (13) (+ / -), (⇑ / ⇓) or 
(
⇐ / ⇒), until the required level is obtained.
Resetting the tone settings
Linear resets all...