Land Rover Range Rover In Car Entertainment Aus Rover Manual
Have a look at the manual Land Rover Range Rover In Car Entertainment Aus Rover Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
In-Car Entertainment Geluidsinstallatie in voertuig Equipement de sonorisation automobile Stereoanlage Antenna dellautor adio Equipo de sonido Sistema audio
The audio equipment fitted to your vehicle has been carefully chosen to add to your motoring enjoyment. Whether you drive for business, or purely for pleasure, we want you to enjoy using your audio equipment, so please take a little time to read these instructions and find out how to get the very best In-Car Entertainment! Printed in Australia on 100% Recycled Paper.
1 In-Car Entertainment Contents Sound controls 2................................................................................... Radio controls 4.................................................................................... Cassette player 5................................................................................... Compact disc player 7........................................................................... Radio tuning 9....................................................................................... Radio pre-set buttons 10....................................................................... Auto-store 11........................................................................................ Radio reception 12................................................................................ Care of cassette player and tapes 13..................................................... Compact disc changer unit 14............................................................... Caring for compact discs 15.................................................................. Security code 16.................................................................................... Ó1998 Rover Group Limited Publication Part No. VDK100320 11.98 AUS Range Rover - 1st Edition
Sound Controls 2 1 2 ICE0113 SOUND CONTROLS 1. On/off and volume control Press to switch on (display shows RANGE ROVER, followed briefly by CODE). Press again to switch off. Rotate steadily to right or left to adjust the volume. The volume can also be adjusted using the remote switches on the steering wheel (see Owners handbook). NOTE:The volume level will automatically increase or decrease according to the vehicle road speed, thereby comabating any additional road or wind noise that may be experienced. NOTE:If you have a car telephone with a mute signal output connected to the stereo system, radio, tape or CD play automatically mutes when the telephone is in use.2. Audio selection button Press one or more times to select bass, treble, balance, fader or subwoofer (display confirms selection). NOTE:The subwoofer control, and associated display, operate only with the optional subwoofer unit. Bass: Press once, then rotate volume control to left or right to reduce or increase bass response. Display shows: BASS - 9 = minimum bass BASS 0 = normal bass BASS + 9 = maximum bass Treble: Press twice, then rotate volume control to left or right to reduce or increase treble response. Display shows: TREB - 9 = minimum treble TREB 0 = normal treble TREB + 9 = maximum treble
Sound Controls 3 Balance: Press three times, then rotate volume control to left or right to adjust balance between left and right speakers. Display shows: BAL R 9 = max sound from RIGHT BAL 0 = equal balance BAL L 9 = max sound from LEFT Fader: Press four times, then rotate volume control to left or right to adjust balance between front and rear speakers. Display shows: FAD F 9 = max sound from FRONT FAD 0 = equal balance FAD R 9 = max sound from REAR Subwoofer: Press five times, then rotate volume control left or right to reduce or increase subwoofer response. Display shows: SUB WFR - 9 = minimum response SUB WFR 0 = normal response SUB WFR + 9 = maximum response Press the button again to return to volume control. NOTE:After 5 seconds without further adjustment, audio mode deselects and reverts to volume control. IMPORTANT This audio unit is equipped with a 20 minute time-out function. This enables the unit to be switched on and then used for up to 20 minutes after the vehicle starter switch has been turned to position 0, even if the key is removed. This means that if a passenger is to be left in the vehicle, music can be listened to, without the security risk of leaving the keys in the starter switch. At the end of the 20 minutes, the unit will switch off automatically.
Radio Controls 4 MAN 39487ICE011465 RADIO CONTROLS 3. FM waveband selector Press briefly to select FM frequencies. There are two FM bands (FM1 and FM2). Both have the same tuning range, and each one can be used to store six frequencies on the pre-set buttons. Press and hold to activate auto-store (on FM2 only - see Auto-store). 4. AM waveband selector Press briefly to select one of the two AM bands (AM1 and AM2). Both AM wavebands can be used to store six stations on the pre-set buttons. Press and hold to activate auto-store (on AM2 only - see Auto-store). 5. Tuning buttons Briefly press either button to search (manually or automatically) up or down the frequency range (see Radio tuning).6. Manual tuning selector Press to select manual tuning mode (MAN is displayed) - use in conjunction with the tuning buttons (see Radio tuning). Press again to return to automatic tuning. NOTE:The frequency can also be adjusted by using the remote switches on the steering wheel (see Owners handbook). 7. Radio pre-set buttons (1-6) Use to store up to 6 radio stations on the FM and AM wavebands. Press briefly to select a stored frequency. Press and hold (until radio bleeps) to store a frequency on a pre-set (see Pre-set buttons). 8. Scan mode button Press the button to scan through all frequencies on the chosen waveband (5 seconds of each frequency will be played). Press again to cancel the scan. 9. i button The functionality of this button is inhibited on this radio.
Cassette Player 5 10111214 13 1516ICE0115 CASSETTE PLAYER CONTROLS 10. Tape mode selector Press to select tape play (display shows SIDE-1 or SIDE-2). If the set is switched off during tape play, the cassette remains in stand-by mode. Play resumes when the set is switched on again. 11. Cassette compartment Insert the tape with the open side to the right and push in gently. The radio mutes and tape play starts immediately. NOTE:At the end of either side of the tape, play will automatically continue in the opposite direction. 12. Cassette eject button Press to eject the tape (display shows TAPE EJECT). The unit returns to radio mode, selecting the waveband and frequency last in use. NOTE:If the tape is ejected when the set is in radio or CD mode, sound briefly mutes.13. Tape search controls Fast forward/rewind: Press the manual mode button (MAN), then press and hold (for at least 1 second) the appropriate search button (TAPE FFWD or TAPE FREW appear in the display). The tape will fast forward/rewind until the search button is pressed again. Skip: With the unit in automatic mode, press the appropriate search button to skip to either the beginning of the next track, or the beginning of the current track (SEEK, and chevrons indicating direction, appear in the display). Press the button repeatedly to skip forwards or backwards through more than one track. NOTE:The skip function may not find spaces between tracks of less than three seconds duration, and may also be confused by excessive background noise, very soft musical passages and intermittent pauses in music or speech. NOTE:Skip and mode selection can be operated using the remote switches on the steering wheel (see Owners handbook).
Cassette Player 6 10111214 13 1516ICE0115 14. Tape reverse Press to play the opposite side of the tape. 15. Dolby B noise reduction * Press pre-set 1 when playing tapes recorded using the Dolby B NR system (display shows Dolby double D symbol).16. Tape scan button Press the SCAN button to listen to the first 10 seconds of each track on the tape (both sides). The display shows TAPE SCAN. The scan continues until the button is pressed again or until another function is selected. * Noise reduction manufactured under license. Dolby and the double D symbol are trade marks of Dolby Laboratories Licensing Corporation.
Compact Disc Player 7 17 2018ICE011619 COMPACT DISC PLAYER CONTROLS (if fitted) 17. CD mode selector Press to select CD player mode. Playback starts from the point on the disc at which play last stopped, or from the start of the first disc if the magazine is newly inserted. The display shows disc number (CD1) and track number (01). If no magazine has been inserted into the autochanger, NO MAGAZINE is displayed. At the end of each disc, playback automatically continues with the next disc (missing discs are skipped if less than six have been loaded). NOTE:If a disc has been inserted into the magazine upside down, CD ERROR is displayed.18. Disc selection buttons (1-6) Press the appropriate button to select the desired disc. If an empty compartment is selected, the display shows NO DISC and the next available disc is selected instead. NOTE:Skip and mode selection can be operated using the remote switches on the steering wheel (see Owners handbook). NOTE:The compact disc player controls will operate only with the optional CD changer unit.
Compact Disc Player 8 17 2018ICE011619 19. Track search buttons Skip: Press the appropriate button to skip to the beginning of the next, or back to the beginning of the current track (the display shows disc and track numbers). Press the backward search button twice to skip to the beginning of the previous track. If the button is pressed and held, the CD player continues to skip tracks (forwards or backwards) until the button is released. Search: Press the Manual mode button (MAN), then press and hold the appropriate search button to move forward or backward (display shows FFWD or FREW) through the track at a greatly increased play speed (volume reduces).20. Scan mode button (SCAN) Press the SCAN button to listen to the first 10 seconds of every track on the selected disc. SCAN appears in the display, along with the numbers of the disc and the scanned track. The scan continues until the button is pressed again or until another function is selected. Press and hold the button for approximately 2 seconds (until the set bleeps) to activate the random play mode (RND and the disc and track number are displayed). This allows any track from any loaded disc to be played at random.