Land Rover Range Rover In Car Entertainment Aus Rover Manual

In-Car Entertainment
Geluidsinstallatie in voertuig
Equipement de sonorisation automobile
Stereoanlage
Antenna dellautor adio
Equipo de sonido
Sistema audio 

The audio equipment fitted to your vehicle has been carefully chosen to add to
your motoring enjoyment.
Whether you drive for business, or purely for pleasure, we want you to enjoy
using your audio equipment, so please take a little time to read these
instructions and find out how to get the very best In-Car Entertainment!
Printed in Australia on 100% Recycled Paper. 

1
In-Car Entertainment
Contents
Sound controls 2...................................................................................
Radio controls 4....................................................................................
Cassette player 5...................................................................................
Compact disc player 7...........................................................................
Radio tuning...

Sound Controls
2
1
2
ICE0113
SOUND CONTROLS
1. On/off and volume control
Press to switch on (display shows RANGE
ROVER, followed briefly by CODE). Press
again to switch off.
Rotate steadily to right or left to adjust the
volume.
The volume can also be adjusted using the
remote switches on the steering wheel (see
Owners handbook).
NOTE:The volume level will automatically
increase or decrease according to the vehicle
road speed, thereby comabating any
additional road or wind noise that may be
experienced....

Sound Controls
3
Balance:
Press three times, then rotate volume control
to left or right to adjust balance between left
and right speakers. Display shows:
BAL R 9 = max sound from RIGHT
BAL 0 = equal balance
BAL L 9 = max sound from LEFT
Fader:
Press four times, then rotate volume control
to left or right to adjust balance between
front and rear speakers. Display shows:
FAD F 9 = max sound from FRONT
FAD 0 = equal balance
FAD R 9 = max sound from REAR
Subwoofer:
Press five times, then rotate volume...

Radio Controls
4
MAN
39487ICE011465
RADIO CONTROLS
3. FM waveband selector
Press briefly to select FM frequencies. There
are two FM bands (FM1 and FM2). Both have
the same tuning range, and each one can be
used to store six frequencies on the pre-set
buttons.
Press and hold to activate auto-store (on
FM2 only - see Auto-store).
4. AM waveband selector
Press briefly to select one of the two AM
bands (AM1 and AM2). Both AM wavebands
can be used to store six stations on the
pre-set buttons.
Press and hold...

Cassette Player
5
10111214
13 1516ICE0115
CASSETTE PLAYER CONTROLS
10. Tape mode selector
Press to select tape play (display shows
SIDE-1 or SIDE-2).
If the set is switched off during tape play, the
cassette remains in stand-by mode. Play
resumes when the set is switched on again.
11. Cassette compartment
Insert the tape with the open side to the right
and push in gently. The radio mutes and tape
play starts immediately.
NOTE:At the end of either side of the tape,
play will automatically continue in the...

Cassette Player
6
10111214
13 1516ICE0115
14. Tape reverse
Press to play the opposite side of the tape.
15. Dolby B noise reduction *
Press pre-set 1 when playing tapes recorded
using the Dolby B NR system (display shows
Dolby double D symbol).16. Tape scan button
Press the SCAN button to listen to the first
10 seconds of each track on the tape (both
sides). The display shows TAPE SCAN. The
scan continues until the button is pressed
again or until another function is selected.
* Noise reduction...

Compact Disc Player
7
17
2018ICE011619
COMPACT DISC PLAYER CONTROLS
(if fitted)
17. CD mode selector
Press to select CD player mode. Playback
starts from the point on the disc at which
play last stopped, or from the start of the
first disc if the magazine is newly inserted.
The display shows disc number (CD1) and
track number (01). If no magazine has been
inserted into the autochanger, NO
MAGAZINE is displayed.
At the end of each disc, playback
automatically continues with the next disc
(missing discs...

Compact Disc Player
8
17
2018ICE011619
19. Track search buttons
Skip:
Press the appropriate button to skip to the
beginning of the next, or back to the
beginning of the current track (the display
shows disc and track numbers). Press the
backward search button twice to skip to the
beginning of the previous track. If the button
is pressed and held, the CD player continues
to skip tracks (forwards or backwards) until
the button is released.
Search:
Press the Manual mode button (MAN), then
press and hold the...