Land Rover Range Rover Audio Tv Navigation System Lm 2nd Edition Rover Manual

							68
Telephone
Starting dialling
Press the telephone functions button (5) on the 
control panel or alternatively turn the right rotary 
control (10) until the phone icon is marked, then 
press to start dialling.
Another method is to briefly press the 
telephone/voice recognition button on the 
steering wheel (See below).
Scrolling in the directory
•Turn the right rotary control (10) until 
‘’ (ascending)
is highlighted.
•Press (10) to activate the function.
The previous/next eight names are displayed.
Number memory
The last ten numbers dialled can be recalled 
using the number memory:NOTE: Each time a new number is dialled, the last 
number in the memory list is deleted and the new 
number added.
•Turn the right rotary control (10) until ‘Dial’ is 
marked.
•Press (10) to activate ’Dial’.
•Turn (10) until ‘Number memory’ is 
highlighted.
•Press (10) to activate the ‘Number memory’.
The number last dialled will be displayed.
To dial further contacts:
•Turn the right rotary control (10) to the left 
and the last 10 numbers memorised will be 
displayed, in reverse order, beginning with 
the least recent.
•Turn the right rotary control (10) to the right 
and the last 10 numbers will be displayed in 
normal order starting with the most recent.
Deleting a number from number memory
•Turn the right rotary control (10) until the 
number you wish to delete appears on the 
screen.
•Press and turn (10) until ‘Dial’ is marked.
•Press and turn (10) until ‘C’ is marked.
•Keep (10) pressed until the last number is 
deleted.
If the digits are deleted one by one, by quickly 
pressing the control (10), the number remains in 
memory.
NOTE: You can only delete from number 
memory, not SIM card.
TOP-8
With this function you can call-up the names or 
phone numbers of the eight names that you most 
frequently call from the phone book. These 
names are automatically memorised.
H4152 
						

							69
Telephone
Dialling a TOP-8 contact
•Turn the right rotary control (10) until the 
desired name is highlighted.
•Press (10) to activate the name.
The name and then the number of the contact are 
then displayed.
Selecting the function
•Turn the right rotary control (10) until 
‘Functions’ are highlighted.
•Press (10) to activate ‘Functions’.
•Turn (10) until ‘TOP-8’ is highlighted.
•Press (10) to activate TOP-8.
Ending a call
Press the telephone functions button (5) on the 
control panel or alternatively turn the right rotary 
control (10) until the phone icon is marked, then 
press (10) to end the call.
If a name has not been used very often in the 
past, it will automatically be eliminated from the 
TOP-8 list and will have to be dialled via the 
‘Directory’ function.
Deleting names/numbers in the TOP-8 list
•Select ‘TOP-8’.
•Turn the right rotary control (10) until the 
name or the number you wish to delete is 
marked.
•Keep (10) pressed until the name or number 
is deleted.
DIALLING BY ENTERING THE PHONE 
NUMBER
•Turn the right rotary control (10) until 
‘Functions’ is highlighted.
•Press (10) to activate functions.
•Turn (10) until ‘Dial’ is activated.
•Press (10) to activate dial.
Entering a phone number
To enter a number, e.g. ‘024’, turn the right 
rotary control (10) until the digit ‘0’ is marked, 
then press (10) to accept the zero.
In the same way, select all the remaining digits 
making up the phone number.
If the number needs to be corrected, turn the 
right rotary control (10) until ’C’ is highlighted, 
then press (10) to activate the function:
•Press (10) briefly and the last digit entered is 
deleted
•Keep (10) pressed for a while and the entire 
number is deleted.
When the number has been entered correctly, 
turn the right rotary control (10) until the right 
arrow is marked and then press (10) to end the 
number input.
Starting dialling
Press the telephone functions button (5) on the 
control panel or alternatively, turn the right rotary 
control (10) until the phone icon is marked, then 
press (10) to start dialling.
TMCEmergencyInfo Functions30.07.200114:10Monday
DIAL
Last
Numbers089123_
C 1 2 3
4
5
6
90*8 7
H4179 
						

							70
Telephone
Ending a call
Press the telephone functions button (5) on the 
control panel or alternatively, turn the right rotary 
control (10) until the phone icon is marked, then 
press (10) to end the call.
SMS MESSAGES
Your phone system supports Short Message 
Services (SMS) and can display text messages.
Reading SMS messages
•Turn the right rotary control (10) until 
‘Functions’ is highlighted, then press (10) to 
activate.
•Turn (10) until ‘SMS’ is highlighted, then 
press (10) to activate.
If the ‘>>’ symbol is displayed, further messages 
are stored. Turn the right rotary control (10) until 
‘>>’ is highlighted, then press(10).
Calling the sender back
While the message is displayed, turn the right 
rotary control (10) until the phone icon is marked 
and then press (10). The message sender’s 
number is then dialled.
Deleting SMS messages
•Turn the right rotary control (10) until ‘delete’ 
is highlighted.
•Keep (10) pressed until the message is 
deleted.
NOTE: If a letter symbol appears on the lower 
edge of the screen, unread SMS messages have 
been received.
TMC30.07.200114:10Monday
SMS MESSAGES
*   SMS    1
*   SMS    2
*   SMS    3
*   SMS    4
*   SMS    5*   SMS    6
*   SMS    7
*   SMS    8
*   SMS    9
SOS return
H4180
TMC30.07.200114:10Monday
SMS 01, 09, 2001 8.30
Please Telephone Main Office
delete
*  4  9  1  7  1  1  2  3  4  5  6  7
SOS return
H4181 
						

							71
Voice Recognition
Voice RecognitionVoice Recognition
WARNING
Do not use the voice control for placing 
emergency calls. Your voice and tone could be 
affected by stressful situations as a result of 
which, the process of establishing the 
telephone connection could be unnecessarily 
delayed.
You are urged to use the handset or the 
multi-functional steering wheel or on-board 
computer if a number for emergency calls is 
stored in these systems.
Making yourself clearly understood
The voice control system includes a special 
hands-free microphone mounted in the roof 
lining of your vehicle, at the front. This 
microphone filters out ambient noise. There are 
nevertheless a few points to observe in making 
sure you are properly understood:
•Speak continuously and at normal volume, 
avoiding unnatural emphasis and pauses 
between words.
•Do not speak while the voice control system 
itself is giving an output.
•It is possible that noise interference from 
outside the vehicle could affect commands so 
to avoid this keep doors, windows and the 
sunroof closed.
•Avoid causing background noise in the 
vehicle while you are speaking and ask your 
passengers not to talk while you are issuing 
voice commands.
•The hands-free microphone is positioned to 
pick up the driver’s voice. Other occupants of 
the vehicle could be understood with less 
accuracy and are, therefore, advised to use 
the handset when making a telephone call.
NOTE: The voice recognition directory is 
separate fromthe SIM card directory.
IMPORTANT
Voice control enables you to activate 
important functions of the car telephone and 
navigation systems without the need to 
operate the controls manually. This enables 
you to concentrate fully on driving the vehicle, 
you do not need to divert your eyes from the 
road ahead in order to check read-outs, and 
the voice control system feeds back 
information to you.
A number of voice commands are available 
and, with a little experience, you will find them 
easy and convenient to use. Whenever you 
issue one of the defined commands with the 
system active, the voice control system 
converts your command into a control signal 
for the telephone or navigation system. The 
system automatically recognises whether 
your command is directed at the telephone or 
navigation system. Your inputs take the form 
of dialogues or commands. You are guided 
through these dialogues by announcements 
or questions.
Please familiarise yourself with the functions 
of the car telephone and navigation system, if 
fitted, before using voice control.
IMPORTANT
Voice recognition is currently available in only 
the following languages:
English, German and Italian 
						

							72
Voice Recognition
Defined voice commands
The voice control system understands around 50 
predefined commands which need to be given 
exactly word for word.
You can prompt the system to speak a selection 
of these commands by activating the system and 
giving the command ‘Help’. These commands 
are as follows:
Telephone commands
•Dial number/Dial telephone number
•Dial/Redial
•Correction
•Delete
•Cancel
•Dial name
•Store name
•Save
•Delete name
•Read phone book
•Clear phone book
•Record/Record note/Make a note
•Read note/Read notepad
•Delete note/Clear notepad
Navigation commands
•Map/Route map
•Scale 100 metre/Scale 100 kilometre
•Petrol station at current location/at 
destination
•Car parks at current location/at destination
•Hotels at current location/at destination
•Restaurants at current location/at destination
•Destination guide/Destination guidance
•Save position/Save current position
•Instruction
•Instruction off
•New route.
Activating the system
To switch on voice control, press the voice 
control key (arrowed) in the multi-functional 
steering wheel:
•Hold the key pressed in (until the acoustic 
signal is heard) to activate voice control. A 
brief acoustic signal and the display ‘VOICE 
RECOGNITION’ in the main message centre 
indicate that the system is now in the 
stand-by mode.
•Press this key briefly to activate normal 
telephone functions, which are described in 
the In-Car Telephone handbook.
Before giving a new voice command - except 
during a dialogue - always press the steering 
wheel voice control key.
Interrupting voice control
A command can be interrupted by speaking the 
word ‘cancel’ or by pressing the steering wheel 
voice control key until the system responds by 
saying ‘cancelled’.
H4152 
						

							73
Voice Recognition
It is only possible to interrupt dialogues, in which 
it is possible to speak a text of your choice 
(name, notes) by pressing the steering wheel 
key.
If you receive a telephone call while conducting a 
dialogue by voice control, the telephone mode 
automatically cuts in. The system gives the 
output ‘Cancel’ and ‘INPUT CANCELLED’ appears 
in the main message centre.
DIALLING A PHONE NUMBER
Starting a dialogue
NOTE: The voice control commands you should 
give are shown inside double pointed brackets 
>>......>Dial telephone number>Dial number>Zero>Nought
						

							74
Voice Recognition
Establishing a connection
The commands 
>>Dial number>Dial>Plus>Plus, four, nine>Dial (telephone) numberPlease speak the number< SPEAK NUMBER
>>Zero, eight, nineZero, eight, nine, continue?< TEL 089
>>Three, eight, two, fourThree, eight, two, four, continue?< TEL 0893824
>>One, six, eightOne, six, eight, continue?< TEL 0893824168
>>Dial (number)The number is being dialled< TEL 0893824168 
						

							75
Voice Recognition
Correcting inputs
If you have made a mistake or if the voice control 
has misunderstood, you say:
>>Correction>CorrectionCorrection>Correction>Delete>Delete number>CorrectionCancel>Dial (telephone) numberPlease speak the number< SPEAK NUMBER
>>Zero, eight, nineZero, eight, nine, continue?< TEL 089
>>Three, eight, twoThree, eight, two, continue?< TEL 089382
>>Four, one, sixFour, one, six, continue?< TEL 089382416
>>CorrectionZero, eight...eight, two, continue?>CorrectionZero, eight, nine, continue? TEL 089
>>Delete (number)Please speak the number< SPEAK NUMBER 
						

							76
Voice Recognition
STORING AND DELETING A TELEPHONE 
NUMBER
Storing a telephone number
Telephone numbers which you dial frequently 
can be stored in conjunction with the contact’s 
name, which serves as the word search.
>>Store name>Dial (telephone) number>Save>Store namePlease speak the name< SPEAK NAME
>>Royd AndrewPlease repeat< REPEAT NAME
>>Royd AndrewPlease speak the number< SPEAK NUMBER
>>Zero, eight, nine, three, eightZero, eight, nine, three, eight, 
continue?>Two, four, one, six, eightTwo, four, one, six, eight continue?>SaveThe name is stored< NAME STORED 
						

							77
Voice Recognition
Deleting a memory entry
The command
>>Delete name>Clear phone book>Delete namePlease speak the name< SPEAK NAME
>>Royd AndrewRoyd Andrew, would you like to delete 
the name?>YesName deleted< NAME DELETED
Clearing the entire phone book
You say Voice output Display output
>>Clear phone bookDo you want to clear the phone book?< CLEAR PHONE 
BOOK
>>YesAre you sure?>YesThe phone book is cleared< PHONE BOOK 
CLEARED