Land Rover Range Rover Audio Tv Navigation System Lm 2nd Edition Rover Manual

							58
Off-Road Navigation
Compass
The red compass arrow always points to True 
North (to an accuracy of ±15°). True North is the 
basis from which heading and bearing readings 
are calculated.
Heading
The heading is the direction in which the vehicle 
is pointing. The navigation computer and GPS 
satellite receiver work in conjunction to calculate 
the difference in degrees (°) between the vehicles 
direction and True North - this is the reading 
displayed.
Heading Up icon
This indicates the direction in which the direction 
arrow should be pointing to follow the shortest 
route (by distance) to the destination or next 
waypoint. The icon will remain at the top (°) of 
the compass part of the guidance display.
Bearing
The bearing is the direction (as the crow flies) to 
the destination or next waypoint. The bearing is 
calculated in degrees (°) from True North.
Altitude
The altitude reading is accurate to within 150 
feet. If a valid reading is not available the last 
known altitude will be shown. 
						

							59
Television
Television
TELEVISION CONTROLS
2. Display
9. MENU button
Press to obtain the general menu and also to 
return to the menu from a system feature.
10. Right rotary control
Turn to select a menu item, press to confirm 
selection.
H428310
2
9 
						

							60
Television
TV INTRODUCTION 
Up to 10 TV stations can be stored manually or 
automatically. Picture format and TV format can 
be adjusted to suit individual requirements and 
teletext can be used to display the latest news 
and information.
NOTE: For occupant safety, the TV picture is only 
displayed up to speeds of 2 m.p.h. but the sound 
signal can be heard while the vehicle is being 
driven.
SELECTING TV
Press the MENU button (9) on the control panel 
to display the menu.
•Turn the right rotary control (10) to select 
‘Television’.
•Press the right rotary control (10) to confirm 
selection.
Searching for a station
•Turn the right rotary control (10) to select 
‘Search’.•Press the right rotary control (10) to confirm 
selection.
•Turn the control again to start the station 
search.
Station search is halted when a station with a 
sufficiently strong signal is located on a 
reception channel.
If reception quality deteriorates, a search 
procedure starts automatically. If the word 
‘Mute’ appears on the screen this indicates that 
the TV sound has been automatically 
suppressed.
Trial view and selection
You can display all the memorised stations 
briefly and then select one.
•Turn the right rotary control (10) to select 
‘Programme’.
•Press the right rotary control (10) and hold in 
for about one second.
•Press the control again to continue viewing 
the displayed stations.
Storing stations manually
You can allocate stations to any presets you 
wish:
•Turn the right rotary control (10) to select 
‘Search’. 
•Press the right rotary control (10) to confirm 
selection.
MENU
On Road Navigation
On-board computer
Telephone
Aux heat/vent
Set
DSP
Monitor off
Code
Off Road Navigation
Television
TMC30.07.200114:10Monday
H4162
Search ProgrammeCH 40
24
Set
Teletext
 
Display Zoom 
21 -30Autostore
H4165
Search ProgrammeCH 40
24
Set
Teletext
 
Display Zoom 
Hold key to store channel
H4167 
						

							61
Television
•Turn the control again to start station search. 
Station search is halted when a station with a 
sufficiently strong signal is located.
•Press the control again and hold in for about 
one second.
•Turn the control until the desired memory 
position between 1 and 30 is displayed.
•Press the control to store the selection.
Storing stations automatically
•Turn the right rotary control (10) or press 
until the TV menu is displayed.
•Turn the right rotary control (10) to select 
‘Autostore’.
•Press the control again to start an automatic 
station search with memorising.
If the inputs are not made within four seconds, 
this process will have to be repeated.
The first 10 stations are stored in memory 
locations 21 - 30.
Selecting a stored station
The station stored in memory location 21 is 
automatically shown when TV is selected.
To select a different memorised station:
•Turn the right rotary control (10) or press 
until the TV menu is displayed.
•Turn the control again to select ‘Programme’.
•Press the control again to confirm selection.
•Turn the control until the desired station is 
tuned.
Selecting TV format
Not all countries use the same TV format. 
However, you can adapt your unit to accept the 
format of the country in which you are driving.
(PAL, SECAM, NTSC)
•Turn the right rotary control (10) or press 
until the TV menu is displayed.
•Turn the control again to select ‘Set’.
•Press the control again to confirm selection.
•Turn the control to select ‘TV format’.
Search
Programme
CH 40
24
21 -30
Set
Teletext
 
Display Zoom 
Autostore
H4168
Search ProgrammeCH 40
CH 43
24
21 -30
Set
Autostore
Teletext 
Display 
H4163
Search
Programme
CH 40
CH 43
24
21 -30
Set
Autostore
Teletext 
Display 
H4164 
						

							62
Television
•Press the control to confirm selection.
•Turn the control to select the country in which 
you are currently travelling from the list 
displayed.
•Press the control to confirm/exit.
ADJUSTING THE TV SCREEN
Adjusting contrast, brightness and colour
•Turn the right rotary control (10) to select 
‘Set’.
•Press the right rotary control (10) to confirm 
selection.
•Turn the control again to select the desired 
control.
•Press the control again to confirm selection.•Turn the control to alter the setting.
•Press the control to confirm/exit.
Adjusting picture format
•Turn the right rotary control (10) or press 
until the TV menu is displayed.
•Turn the control again to select ‘Display’.
•Press the control again to confirm selection.
•Turn the control to select the desired picture 
format:
4:3
16:9
Zoom - proportional enlargement.
•Press the control to confirm/exit.
Contrast
H4275
returnTV-FormatEnglandColourBrightness
H4276
TV-FormatEngland
Contrast
H4234
returnTV-FormatEnglandColourBrightness
Search ProgrammeCH 40
24
21 -30
Set
Autostore
Teletext Display Zoom 
H4169 
						

							63
Television
Selecting Teletext
•Press the MENU button (9) on the control 
panel.
•Turn the right rotary control (10) to select 
‘Television’.
•Press the right rotary control (10) to confirm 
selection.
•Turn the control again or press until the TV 
menu is displayed.
•Turn the control to select ‘Teletext’.
•Press the control to view teletext.
If the inputs are not made within four seconds, 
this process will have to be repeated.
Selecting information
Turn the right rotary control (10) until the desired 
page number appears at the top left.
The page will be located and displayed. 
Subsequent pages will be displayed 
automatically if the information extends over one 
page.
Suppressing next page
If the information occupies more than one page, 
the signal to move onto the next page comes 
from the transmitter. You can suppress it as 
follows:
•Press the right rotary control (10) to enter the 
teletext menu.
•Turn the right rotary control (10) to select 
‘Hold’.
•Press the control again to confirm selection.
Search ProgrammeCH 40
24
21 -30
Set
Autostore
Teletext 
Display Zoom 
H4170
CHILL OUT AND GET ON THE SLOPES   226SKI DEALS  Take a  look:ITV WEST MIDLANDS
Ski holidays           226
Holiday index           200
TELETEXT SHOWCASE   105NEW Mobile Ring Tone Service p35
at our selection of
ski offers and head for
the pistes this winter
100
TELETEXT
Teletext 100 Oct1911:21:12
H4256
Hold TV 
Zoom  Page 
H4172 
						

							64
Television
Enlarging text
•Press the right rotary control (10) to enter the 
teletext menu.
•Turn the right rotary control (10) to select 
‘Zoom’.
•Press the control again to confirm selection.
•To enlarge the text, press the right rotary 
control: 
once to enlarge the upper half of the screen 
display
twice to enlarge the lower half of the screen 
display.
•To see the complete screen display again, 
press the right rotary control for a second 
time.
To quit teletext
•Press the right rotary control (10) to enter the 
teletext menu.
•Turn the right rotary control (10) to select 
‘TV’.
•Press the control again to return to TV 
reception. 
						

							65
Telephone
Telep hon e
TELEPHONE CONTROLS
2.Display.
3.Phone operation lights.
5.Telephone functions button
Press to call an entered phone number.
Press to end a call.
9.Menu button
Press to obtain the general menu and also 
to return to the menu from a system.
10.Right rotary control
Turn to select a menu item, press to confirm 
selection.
H428410
23
5
9 
						

							66
Telephone
USING THE TELEPHONE IN THE VEHICLE
The on-board computer can be used to carry out 
the following phone functions quickly and 
directly:
Making an emergency call.
Dialling by name (stored on SIM card).
Dialling by entering a phone number.
Reading SMS messages.
These functions will operate provided you have 
stored the relevant information in the phone or 
activated the relevant functions.
It is also possible to use the cordless handset 
unit stored in the cubby box.
GETTING STARTED
•Press the MENU button (9) on the control 
panel to call-up the general menu.
•Turn the right rotary control (10) until 
‘Telephone’ is highlighted.
•Press (10) to call-up the telephone functions.NOTE: If subscribers are already memorised 
under TOP-8, they will be displayed. Otherwise 
the subscribers memorised in the directory will 
be displayed.
The telephone functions are called up from the 
menu shown above:
•Turn the right rotary control (10) to select a 
function.
•Press (10) to confirm this selection.
Inserting a SIM card
A small size SIM card needs to be inserted into a 
Land Rover approved SIM card adaptor. The 
‘In-Car Telephone’ handbook has instructions on 
how to use it.
Use of the Handset
See ‘In-Car Telephone’ handbook.
Hands-free operation
Calls accepted/dialled via the on-board computer 
or the steering wheel switches will be in 
hands-free mode. Calls can be transferred 
between the cordless handset and hands-free 
mode as defined in the ‘Telephone Handbook’.
Emergency call
It is possible to make an emergency call on the 
GSM network without the SIM card inserted.
•Turn the right rotary control (10) until ‘SOS’ 
is highlighted.
IMPORTANT
Use of the phone while you are driving is 
dangerous as it diverts your attention from 
the traffic situation. In some countries it is 
prohibited and in other countries a hands-free 
unit must be used by those wishing to use the 
phone while driving. When you wish to use 
your phone, you should stop at an appropriate 
place where you are not endangering or 
inconveniencing other vehicles.
TMC30.07.200114:10Monday
MENU
GPS-navigation
On-board computer
Telephone
Aux heat/vent
Set
DSP Television
Monitor off
Code
H4173
return
TOP-8
TMC30.07.200114:10Monday
TOP-8DirectoryDialSMS name/number  1
name/number  2
name/number  3
name/number  4
Functions
H4174 
						

							67
Telephone
•Press (10) to activate this selection.
‘SOS: 112’ and your current location appear 
in the display.
•Press the telephone functions button (5) on 
the control panel or alternatively, turn the 
right rotary control (10) until the phone icon 
is marked and press (10) to activate.
Press (10) a further time to end the 
emergency call.
NOTE: Always tell the emergency centre your 
phone number (if the SIM card is inserted), your 
name, your location and the nature of your 
emergency. The on-board computer will show 
your location (longitude and latitude figures) for 
you to pass to the operator.
PERSONAL IDENTIFICATION NUMBER 
(PIN)
Entering PIN
PIN = Personal identification Number
When starting up, the unit asks you to enter your 
PIN code (only if you have previously entered a 
PIN which is then stored on your SIM card).
The request to ‘ENTER PIN CODE’ appears on the 
display.
Enter the figures of your PIN code one after the 
other:
•Turn the right rotary control (10) until the 
desired digit is highlighted.
•Press (10) to confirm.After the PIN code has been entered, turn the 
right rotary control (10) until ‘#’ is highlighted 
and press (10) to confirm the PIN code.
Correcting the number
•Turn the right rotary control (10) until ‘C’ is 
highlighted.
•Press (10) to correct the number. The last 
digit entered is deleted.
RECEIVING CALLS
NOTE: The radio/cassette/CD will mute and a 
ringing tone will be heard.
Press the telephone functions button (5) on the 
control panel or turn the right rotary control (10) 
until the telephone icon is highlighted or press 
the phone button on the steering wheel.
Press to answer the call.
If the name and telephone number of the caller 
are stored on the telephone card, they are 
displayed.
DIALLING BY NAME
Selecting names
You must have the relevant names and their 
numbers saved on the SIM card.
•Turn the right rotary control (10) until 
‘Functions’ is highlighted.
•Press (10) to activate functions.
•Turn (10) until ‘Directory’ is highlighted.
•Press (10) to activate ‘Directory’.
The first eight names appear on the screen in 
alphabetical order.
•Turn the right rotary control (10) until the 
desired name is highlighted.
•Press (10) to activate the name.
The name and then the number of the contact are 
displayed.
PIN CODE
ENTER PIN CODE
TMC30.07.200114:10Monday
C 1 2 3
4
5
6
90*8 7
H4176