Land Rover Range Rover 2004my Owners Handbook Lm 2nd Edition Nas Rover

							Bulb Replacement
260
REAR SIDE MARKER LIGHTS
From outside the vehicle and with the tailgate 
fully open, remove the two retaining screws (as 
shown). From the side of the vehicle, use a 
suitable tool to carefully lever the unit away 
from the vehicle and rearwards, to access the 
side marker bulb holder.
Be careful to avoid damage to the paintwork, 
when levering the light unit away from the 
vehicle. Cover any tool used with a cloth and 
apply gentle and constant pressure. Do not use 
excessive force - if in doubt, consult your 
retailer.Twist the bulb holder to release it from the light 
unit (as arrowed in illustration), then pull the 
bulb to remove (see inset).
H4287H4288 
						

							Bulb Replacement
261
REVERSE LIGHTS
The reverse lights are located on either side of 
the rear number plate, mounted on the lower 
tailgate.
With the upper tailgate raised, remove the 
screw (see inset) to release the light unit from 
the tailgate.Twist and pull the bulb holder to release from 
the rear of the light unit, then pull the bulb to 
remove.
NOTE: Do not touch the replacement bulb glass 
with your fingers. If necessary, clean the bulb 
with methylated spirits.
H3806
H3807 
						

							Bulb Replacement
262
NUMBER PLATE LIGHTS
With the upper tailgate open and using a 
suitable tool, lever the lens from the tailgate 
(see inset). Pull the bulb to remove. 
SIDE REPEATER LIGHT
Push the lens firmly towards the front of the 
vehicle and withdraw the light unit from the 
wing. Twist to release the bulb holder from the 
lens unit, then pull the bulb from its socket.H3983
H3815 
						

							Bulb Replacement
263
FRONT FOG LIGHTS
To access the bulb; using a suitable tool, lever 
the fog light surround panel out of the front 
bumper. Remove the three securing screws to 
release the light unit. Ease the unit out of the 
front bumper.Depress the two catches (solid arrows in upper 
inset), then twist and pull to remove the bulb 
holder from the lens assembly. Pull the bulb 
from the holder to remove.
Before fitting the replacement bulb, note the 
‘flat’ and the tab on the otherwise circular shape 
of the bulb mounting flange. The tab acts as a 
key to enable correct positioning of the bulb in 
the bulb holder.
NOTE: Do not touch the bulb glass with your 
fingers. If necessary, clean the bulb with 
methylated spirits.
H3808
H3809 
						

							Bulb Replacement
264
DOOR/PUDDLE/LOWER FOOTWELL 
LIGHTS
With the relevant door open, insert a small 
flat-bladed screwdriver under the forward edge 
of the lens. to lever the light unit out of the door. 
Pull the bulb out to remove.
GLOVEBOX LIGHT
Insert a small flat-bladed screwdriver into the 
indent (see inset) on the side of the light unit, 
and carefully prise the unit from the glovebox 
panel. Remove the bulb from its clips.
H4081
H4082 
						

							Bulb Replacement
265
UPPER FOOTWELL LIGHTS
Insert a small flat-bladed screwdriver under the 
side of the light unit and carefully prise the unit 
out of the footwell.
Twist and pull the bulb holder access the bulb 
and pull the bulb to remove.
LUGGAGE LIGHTS
Insert a small flat-bladed screwdriver into the 
indent on the side of the lens and carefully prise 
the lens from the light unit (see inset).
Slide the metal plate to the right and then pull 
away from the back of the light unit (see main 
illustration). Pull the bulb to remove.
H3884
H3810 
						

							Bulb Replacement
266
TAILGATE LIGHT
Insert a small flat-bladed screwdriver under the 
lens and carefully prise the lens from the light 
unit. Pull the bulb to remove.
MAP LIGHT
Insert a small flat-bladed screwdriver into the 
indent on the side of the lens (as illustrated) and 
prise the lens from the light unit. Twist the 
relevant bulb holder anti-clockwise and 
withdraw from the light unit, then pull the bulb 
out to remove.
H4081
H3883 
						

							Bulb Replacement
267
VANITY MIRROR LIGHT
With the vanity mirror cover open, use a small 
flat-bladed screwdriver to lever the relevant 
lens from the mirror/light unit. Pull out bulb to 
remove.
H3882 
						

							268 
						

							269
Technical Data
Lubricants & Fluids
LUBRICANTS AND FLUIDS  . . . . . . . . . . . . . . . .  271
Capacities
CAPACITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . .  272
V8 Engine
V8 ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  273
Electrical System
ELECTRICAL SYSTEM . . . . . . . . . . . . . . . . . . . .  274
Steering
STEERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  275
Wheels & Tires
WHEELS & TIRES  . . . . . . . . . . . . . . . . . . . . . . .  276
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  278
Vehicle Weights
VEHICLE WEIGHTS  . . . . . . . . . . . . . . . . . . . . . .  279
Towing Weights
TOWING WEIGHTS  . . . . . . . . . . . . . . . . . . . . . .  280
Dimensions
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .  281