Land Rover Range Rover 2000 In Car Entertainment Aus Rover Manual

							Security Code
18
ICE0106
ENTERING THE SECURITY CODE
If the code has not already been entered, or
power to the set has been interrupted, the
code MUST be entered before the set will
operate. Enter the code as follows:
·Switch on the radio (CODE appears in
the display). Press pre-set button 1.
·Press either the up or down tuning button
(highlighted in illustration) until the first
digit of the security code appears in the
display. Press pre-set 1 to store the first
digit in the units memory.
·Use either tuning button to select the
second digit of the code (correct digit
appears in the display). Press pre-set 1 to
store the second digit.
·Select the third digit, again using the
tuning buttons (until the correct digit is
displayed). Press pre-set 1 to store the
third digit.
·Select the final digit (the display now
shows the full four digit code). Press
pre-set 1 to store the final digit.If the correct code has been selected, a
two-tone bleep sounds and the radio will
operate.
NOTE:If an incorrect code has been entered,
the first time delay period commences.
During the delay period, WAIT appears in
the display - DO NOT switch off. At the end
of the delay period, CODE reappears in the
display and you can then enter the correct
code. Remember; the time delay period
doubles each time an incorrect code is
entered.