Land Rover Range Rover 2000 In Car Entertainment Aus Rover Manual
Here you can view all the pages of manual Land Rover Range Rover 2000 In Car Entertainment Aus Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.
Page 1
In-Car Entertainment Geluidsinstallatie in voertuig Equipement de sonorisation automobile Stereoanlage Antenna dellautor adio Equipo de sonido Sistema audio
Page 3
The audio equipment fitted to your vehicle has been carefully chosen to add to your motoring enjoyment. Whether you drive for business, or purely for pleasure, we want you to enjoy using your audio equipment, so please take a little time to read these instructions and find out how to get the very best In-Car Entertainment! Printed in Australia on 100% Recycled Paper.
Page 4
1 In-Car Entertainment Contents Sound controls 2................................................................................... Radio controls 4.................................................................................... Cassette player 5................................................................................... Compact disc player 7........................................................................... Radio tuning...
Page 5
Sound Controls 2 1 2 ICE0113 SOUND CONTROLS 1. On/off and volume control Press to switch on (display shows RANGE ROVER, followed briefly by CODE). Press again to switch off. Rotate steadily to right or left to adjust the volume. The volume can also be adjusted using the remote switches on the steering wheel (see Owners handbook). NOTE:The volume level will automatically increase or decrease according to the vehicle road speed, thereby comabating any additional road or wind noise that may be experienced....
Page 6
Sound Controls 3 Subwoofer: Press three times, then rotate volume control left or right to reduce or increase subwoofer response. Display shows: SUB WFR - 9 = minimum response SUB WFR 0 = normal response SUB WFR + 9 = maximum response Press the button again to return to volume control. Balance: Press four times, then rotate volume control to left or right to adjust balance between left and right speakers. Display shows: BAL R 9 = max sound from RIGHT BAL 0 = equal balance BAL L 9 = max sound from LEFT...
Page 7
Radio Controls 4 MAN 39487ICE011465 RADIO CONTROLS 3. FM waveband selector Press briefly to select FM frequencies. There are two FM bands (FM1 and FM2). Both have the same tuning range, and each one can be used to store six frequencies on the pre-set buttons. Press and hold to activate auto-store (on FM2 only - see Auto-store). 4. AM waveband selector Press briefly to select one of the two AM bands (AM1 and AM2). Both AM wavebands can be used to store six stations on the pre-set buttons. Press and hold...
Page 8
Cassette Player 5 10111214 13 1516ICE0115 CASSETTE PLAYER CONTROLS 10. Tape mode selector Press to select tape play (display shows SIDE-1 or SIDE-2). If the set is switched off during tape play, the cassette remains in stand-by mode. Play resumes when the set is switched on again. 11. Cassette compartment Insert the tape with the open side to the right and push in gently. The radio mutes and tape play starts immediately. NOTE:At the end of either side of the tape, play will automatically continue in the...
Page 9
Cassette Player 6 10111214 13 1516ICE0115 14. Tape reverse Press to play the opposite side of the tape. 15. Dolby B noise reduction * Press pre-set 1 when playing tapes recorded using the Dolby B NR system (display shows Dolby double D symbol).16. Tape scan button Press the SCAN button to listen to the first 10 seconds of each track on the tape (both sides). The display shows TAPE SCAN. The scan continues until the button is pressed again or until another function is selected. * Noise reduction...
Page 10
Compact Disc Player 7 17 2018ICE011619 COMPACT DISC PLAYER CONTROLS (if fitted) 17. CD mode selector Press to select CD player mode. Playback starts from the point on the disc at which play last stopped, or from the start of the first disc if the magazine is newly inserted. The display shows disc number (CD1) and track number (01). If no magazine has been inserted into the autochanger, NO MAGAZINE is displayed. At the end of each disc, playback automatically continues with the next disc (missing discs...