Home > Land Rover > Automobile > Land Rover Range Rover 2000 In Car Entertainment Aus Rover Manual

Land Rover Range Rover 2000 In Car Entertainment Aus Rover Manual

Here you can view all the pages of manual Land Rover Range Rover 2000 In Car Entertainment Aus Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.

Page 11

Compact Disc Player
8
17
2018ICE011619
19. Track search buttons
Skip:
Press the appropriate button to skip to the
beginning of the next, or back to the
beginning of the current track (the display
shows disc and track numbers). Press the
backward search button twice to skip to the
beginning of the previous track. If the button
is pressed and held, the CD player continues
to skip tracks (forwards or backwards) until
the button is released.
Search:
Press the Manual mode button (MAN), then
press and hold the...

Page 12

Radio Tuning
9
RADIO TUNING
If you know the frequency of the radio
station you are seeking, or you need to select
a radio station that is too weak to be found
by automatic tuning, use manual tuning, as
follows:
Select the desired waveband (FM or AM),
then press the MAN button (6). By briefly
pressing either tuning button (5), the
frequency changes (either up or down) in
steps of 0.1 MHz for FM, or 9 kHz for AM.
Fast manual tuning
By keeping either manual tuning button
depressed, the waveband is scanned...

Page 13

Radio Pre-sets
10
743ICE0104
RADIO PRE-SET BUTTONS
The six pre-set buttons (7) can be used to
manually store up to twelve FM stations (six
each on FM1 and FM2) and twelve AM
stations (six each on AM1 and AM2). The
pre-sets are programmed as follows:
Programming the pre-sets
·Select the required waveband (FM1, FM2,
AM1 or AM2).
·Tune to the desired frequency using
either automatic or manual tuning.
·Press and hold one of the pre-set buttons
until a bleep sounds. The frequency is
now stored (the display...

Page 14

Auto-store
11
743ICE0104
AUTO-STORE
Auto-store enables you to rapidly tune and
store the strongest FM and AM radio signals
in a single operation. This facility is
particularly useful if you are in an unfamiliar
area and have little knowledge of local
transmitter frequencies.
Programming auto-store
Press and hold the appropriate waveband
selection button (3 or 4) until a bleep sounds
(the radio mutes and the display shows
either FM AUTOSTORE or AM
AUTOSTORE).
Auto-store scans the waveband to find the
six...

Page 15

Digital Sound Processing
12
DIGITAL SOUND PROCESSING (DSP)
(if fitted)
To improve overall sound quality and the
ability of the audio system to negate the
effects of adverse road and travelling
conditions on audio reception, some vehicles
are fitted with DSP. In addition, DSP
provides intelligent interaction with other
vehicle equipment, such as the navigation
system and telephone.
Audio quality
Driver adjustable features
Press the audio selection button 6 times to
access the DPS menu. Rotate the volume...

Page 16

Radio Reception
13
Distortion, interference and lack of signal
clarity, are often attributed to a fault in the
radio - this is rarely the case.
Problems of this kind are usually caused by
phenomena such as atmospheric conditions,
signal strength, hilly terrain, tall buildings,
bridges and even electrical interference from
power lines.
Please remember:A car radio receives
signals while the vehicle is in motion (unlike
a domestic set) - constantly changing
direction and moving away from, or nearer
to, the...

Page 17

Care of Cassette Player and Tapes
14 ICE 0054
Use only good quality tapes with a maximum
capacity of ninety minutes (C90). Check that
both spools rotate freely and remove any
loose turns at the start of the tape by winding
one spool with a pen or pencil.
Cassette player
In use, the tape head accumulates dust and
contamination, gradually impairing sound
reproduction and, in extreme cases, reducing
volume too. To combat contamination, clean
the tape head periodically (after
approximately every 20 hours...

Page 18

CD Autochanger & Discs
15
ICE0096231
COMPACT DISC CHANGER UNIT (if fitted)
The CD autochanger is located in the rear
loadspace where shown below.
Removing/inserting the magazine
Fully open the sliding cover (1) to insert or
remove the magazine. Keep the cover closed
at all other times to prevent dust and dirt
from entering the changer unit.
Press the button (2) to eject the magazine.
Insert the magazine (3) in the direction of the
arrow marked on the magazine casing and
push it fully into the changer....

Page 19

Caring for Compact Discs
16 IMPORTANT
·Use standard 12cm CDs only.
·DO NOT use irregularly shaped or
damaged CDs - these may damage
the compact disc changer.
·8cm CD singles must NOT be used,
even if a CD adaptor is fitted.
·The CD autochanger should not be
used in temperatures outside the
range -10
°Cto+60°C.
·In th unlikely event that the CD
autochanger overheats, CD OVER
TEMP will be displayed - change to
radio or tape mode until the unit has
cooled.
·The CD autochanger should only be
used as...

Page 20

Security Code
17
SECURITY CODE INFORMATION
NOTE:Your vehicle was delivered with the
security code disabled, if you wish to have
the code activated, consult your Land Rover
dealer.
To reduce the risk of theft, Range Rover
radio/cassette and CD players are
programmed with a four digit security code.
Once activated, this code prevents the unit
from functioning if it is illegally removed
from the vehicle. There are 10,000 different
codes - making your radio equipment
valueless to a thief unless he has the...
Start reading Land Rover Range Rover 2000 In Car Entertainment Aus Rover Manual

Related Manuals for Land Rover Range Rover 2000 In Car Entertainment Aus Rover Manual

All Land Rover manuals