Land Rover Lr3 Owners Handbook 2004 Rover

321
Bulb Replacement
R
Changing a front indicator lamp bulb
1.Twist and lift off the domed cap.
2.Pull out the bulb complete with electrical 
connector.
3.Pull the bulb out of the electrical connector.
4.Insert the new bulb and repeat the above 
procedure in reverse order.
When replacing the cap, align the 
arrowheads on the cap and the body of the 
unit.Refitting the headlamp unit
1.Reconnect the wiring plug.
2.Offer up the unit into position.
3.Push down on the two locking slides.
4.Refit the grille....

Bulb Replacement
322
L
REAR LAMP UNIT
Note: If accessory lamp guards are fitted, refer 
to the separate accessory user instructions for 
removal.
The rear lamp unit contains five lamps and it is 
necessary to completely remove the unit from 
the vehicle in order to change any of the bulbs.
Removal of rear lamp unit
1.With the tailgate open, remove two screws 
from the edge of the unit nearer the rear 
door aperture.
2.Pull the unit away from the vehicle.3.Disconnect the wiring multi-plug and 
remove the...

323
Bulb Replacement
R
Refitting the rear lamp unit
1.Reconnect the electrical multi-plug.
2.Locate the unit’s two studs in the sockets at 
the left-hand side of the mounting face.
3.Insert and tighten the two screws on the 
right-hand side of the unit.
4.Check that all of the bulbs work.NUMBER PLATE LAMPS
With the upper tailgate open and using a 
suitable tool, lever the lens from the tailgate 
(see inset). Pull the bulb to remove.
H5726G 

Bulb Replacement
324
L
SIDE MARKER LAMP
Push the lens firmly towards the front of the 
vehicle and withdraw the lamp unit from the 
wing. Twist to release the bulb holder from the 
lens unit, then pull the bulb from its socket.
FRONT FOG LAMPS
To access the bulb; using a suitable tool, lever 
the fog lamp surround panel out of the front 
bumper. Remove the three securing screws to 
release the lamp unit. Ease the unit out of the 
front bumper.
H5727G
H5728G 

325
Bulb Replacement
R
Twist and pull to remove the bulb holder from 
the lens assembly then depress the two catches 
(solid arrows in upper inset) and pull the bulb 
from the holder to remove.
Before fitting the replacement bulb, note the 
’flat’ and the tab on the otherwise circular shape 
of the bulb mounting flange. The tab acts as a 
key to enable correct positioning of the bulb in 
the bulb holder.
Note: Do not touch the bulb glass with your 
fingers. If necessary, clean the bulb with 
methylated...

Bulb Replacement
326
L
COURTESY LAMPS*
Insert a small flat-bladed screwdriver into the 
indent on the side of the lens and carefully prise 
the lens from the lamp unit.
Pull the bulb to remove.
TAILGATE LAMP
Insert a small flat-bladed screwdriver under the 
lens and carefully prise the lens from the lamp 
unit. Pull the bulb to remove.
H5733G
H4081 

327
Bulb Replacement
R
MAP LAMP
Insert a small flat-bladed screwdriver into the 
indent on the side of the lens and prise the lens 
from the lamp unit. Pull the bulb out to remove 
it.
VANITY MIRROR LAMP*
With the vanity mirror cover open, use a small 
flat-bladed screwdriver to lever the relevant 
lens from the mirror/lamp unit. Pull the bulb to 
remove.
H5734G
H5735G 

Bulb Replacement
328
L
MIRROR DOWNLIGHTER
Use a small flat-bladed screwdriver to lever the 
lens from the mirror/lamp unit. Twist the bulb 
holder to reveal the bulb.
H5736G 

Technical Data
R
329
Lubricants & Fluids
LUBRICANTS AND FLUIDS  . . . . . . . . . . . .331
Capacities
CAPACITIES   . . . . . . . . . . . . . . . . . . . . . . . 333
Engines
ENGINES  . . . . . . . . . . . . . . . . . . . . . . . . . . 334
Electrical System
ELECTRICAL SYSTEM  . . . . . . . . . . . . . . . . 335
Steering
STEERING  . . . . . . . . . . . . . . . . . . . . . . . . . 336
Wheels & Tires
WHEELS & TIRES  . . . . . . . . . . . . . . . . . . . 337
TIRE PRESSURES  . . . . . . . . . . . . . . . . . ....

Technical Data
330
L
LAND ROVER
RECOMMENDS