Land Rover Lr3 Audio Handbook Rover

11
Controls & Settings
R
Controls & Settings
CONTROLS - STANDARD AUDIO
Main controls
1.Pre-set stations.
2.Information display screen.
3.Access menu, save and close menu.
4.Back/exit in menu.
5.Press to accept a selection. Rotate to move 
up or down a menu.
6.Skip, forward. (CD) Automatic seek/search 
up.
7.Fast forward/manual search/scan up.
8.CD slot.
9.Disc eject.10.Rewind/manual search/scan down.
11.Return to start/previous. (CD) Automatic 
seek/search down.
12.Press On/Off, rotate increase/decrease...

12
Controls & Settings
R
VOLUME SETTINGS
Power Save Volume
The audio unit can be used with the engine off, 
but the volume available will be restricted. If the 
volume control is not adjusted during use with 
the starter switch off, the volume will resume at 
the last selected level when the starter switch is 
turned on.
The available volume range will be capped to 25 
if the engine is not running.Automatic Volume Control
AVC (Automatic Volume Control) adjusts the 
volume level to allow for the changes...

13
Controls & Settings
R
Info Offset Volume
The Info Offset Volume allows an increased 
volume level to be set for announcements 
(Alerts). The figure set determines the number 
of steps above the current output. For example, 
if the Info Offset is currently 6, and the audio 
output is 14, the announcement will be made at 
a volume level equal to 20.
To access the Info Offset settings, press the 
Tone button for approximately five seconds 
until the AVC Level setting is displayed. Use 
short presses of...

14
Controls & Settings
R
TONE AND BALANCE ADJUSTMENT
Tone and Balance adjustment
To access the Bass setting, press the Tone 
button briefly. When the current Bass setting is 
displayed, use the rotary control to increase or 
decrease the Bass level.
To access the Treble setting, press the Tone 
button repeatedly until the current Treble 
setting is displayed. Use the rotary control to 
increase or decrease the level.To access the Balance setting, press the Tone 
button repeatedly until the current...

15
Controls & Settings
R
Reset Tone Settings
It is possible to reset all of the tone settings to 
the original factory values.
Press the Tone button to enter the settings 
menu. Scroll to the Reset Tone Settings 
screen, highlight ‘Yes’ or ‘No’ as required, and 
press the ‘MENU/OK’ button.
All settings will be reset to the neutral (central) 
value.
Reset ToneSettingsNo
Reset Tone
SettingsYe s
ICE1539 ENG 

16
Controls & Settings
R
CLOCK
Adjusting Clock.
To access the Clock Set menu, press the 
‘MENU/OK’ button, turn the right-hand rotary 
control to scroll to the clock menu, then press 
the rotary control to select ‘Set’.
To adjust the hours, rotate the control 
clockwise to increase or anti-clockwise to 
decrease. Pressing the rotary control to accept 
the hours setting moves the highlight on to the 
minutes setting.
Repeat the exercise for minutes and press the 
rotary control to accept the value shown....

17
Radio Operation
R
Radio Operation - Standard Audio
RADIO SETTINGS
Information display screen
1.Current wave band selected.
2.Clock display.
3.PTY (program type information) on.
4.Station name (only available when PTY is 
selected) or frequency.
5.Pre-set number for station being played.Waveband Selection
To select the FM waveband, press the ‘FM’ 
button briefly. Repeated presses will scroll 
through ’FM1, FM2’ and ‘FMa’. The selections 
will be shown in the top left corner of the 
information...

18
Radio Operation
R
Autostore
To autostore FM stations, press and hold the 
‘FM’ button. ‘Autostore’ will be shown in the 
information display and the stations will be 
stored under the pre-set numbers in the order 
in which they are found.
To access the stored stations, press the 
required pre-set number briefly.Storing Stations Manually.
To store a station, press either the ‘Search up’  
or ‘Search down’ buttons to scan up or down 
to the next available station. Having tuned to the 
desired station,...

19
Radio Operation
R
RADIO BROADCAST DATA SYSTEM
Your radio is equipped with Radio Broadcast 
Data System (RBDS), which enables the audio 
unit to receive additional information with the 
normal radio signals.
On the FM waveband, RBDS enables the radio 
to receive information broadcasts. RBDS also 
allows the radio to automatically re-tune to 
stations that are linked to the same network if 
that network allows this.
Note: Not all FM radio stations broadcast 
RBDS. If a non-RBDS station is selected, RBDS...

20
Radio Operation
R
NEWS INFORMATION
Selecting news information
Press the ‘MENU/OK’ button to display the 
menu. Use the rotary control to scroll up or 
down through the menu to ‘NEWS’. Press 
either the rotary control or the ‘MENU/OK’ 
button to change the status to ‘ON’ or ‘OFF’.
During news broadcasts, the display flashes 
’NEWS’  alternately with the name of the radio 
station providing the news information.When the news information mode is active, and 
a news information broadcast is received,...