Land Rover Defender 300tdi Workshop 3rd Edition Rover Manual
Here you can view all the pages of manual Land Rover Defender 300tdi Workshop 3rd Edition Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.
Page 451
INSTRUMENTS 1 REPAIR INSTRUMENT PANEL Service repair no - 88.20.02 Remove 1.Disconnect battery. 2.Remove 4 screws securing instrument panel to fascia cowl. 3.Pull instrument panel away from fascia sufficent to disconnect speedometer cable. 4.Disconnect multi-plugs, electrical leads and connections to vehicle alarm system, if fitted See ELECTRICAL, Repair, Vehicle immobilisation and alarm system . 5.Withdraw panel, complete with instruments. Refit 6.Offer up instrument panel, connect multi-plugs,...
Page 452
88INSTRUMENTS 2 REPAIR FUEL AND TEMPERATURE GAUGE Service repair no - 88.25.26 - Fuel gauge Service repair no - 88.25.14 - Temperature gauge Remove 1.Remove instrument panel See Instrument panel . 2.Release illumination bulb holder and disconnect electrical leads from gauge. 3.Unscrew knurled nut and remove clamp securing gauge. 4.Remove earth lead eylet from gauge stud. 5.Withdraw gauge from instrument panel Refit 6.Fit gauge into instrument panel, locate earth lead, and secure with clamp. 7.Fit bulb...
Page 453
INSTRUMENTS 3 REPAIR CLOCK - CENTRE DASH PANEL Service repair no - 88.15.07 Remove 1.Remove 2 screws and withdraw switch panel from centre dash. 2.Release illumination bulb holder and disconnect electrical leads from clock. 3.Press in spring retainers and remove clock from panel. Refit 4.Fit clock into dash panel. 5.Fit electrical leads and bulb holder. 6.Secure switch panel to centre dash.WARNING LIGHT PANEL Service repair no - 88.20.18 Remove 1.Remove 2 screws and withdraw warning light panel....
Page 454
88INSTRUMENTS 4 REPAIR PRINTED CIRCUIT - WARNING LIGHT PANEL Service repair no - 88.20.20 Remove 1.Remove warning light panel See Warning light panel . 2.Remove 13 illumination bulb holders from light panel. 3.Release printed circuit from locating pins and remove from panel seatings. Refit 4.Fit new printed circuit over panel seatings and position on locating pins. 5.Fit illumination bulbs to secure circuit. 6.Fit warning light panel See Warning light panel .FUEL GAUGE TANK UNIT - REAR FUEL TANK,...
Page 455
INSTRUMENTS 5 REPAIR FUEL GAUGE TANK UNIT - SIDE FUEL TANK Service repair no - 88.25.31 WARNING: Ensure that fuel handling precautions given in Section 01 - Introduction are strictly adhered to when carrying out the following instructions. Remove 1.Disconnect battery. 2.Remove RH front seat cushion. 3.Release retaining catch and remove seat base cover to gain access to fuel tank. 4.Disconnect electrical plug from fuel gauge unit. 5.Release locking ring and withdraw fuel gauge unit from tank, complete...