LaCie 724 Users Manual

							LaCie 700 Series LCD Monitors Introduction
User Manual page 11
LaCie 700 Series LCD Monitors Introduction
User Manual page 11
2
LED  ba ckli ght
700 Series LCD Monitors
Quick Install Guide
Box Contents1.3. 
Your box contains the LaCie 700 Series LCD Monitor and some 
or all of the items listed below, depending on model:
LaCie 720
Monitor1. 
DVI-D cable2. 
DVI-I cable3. 
USB cable4. 
AC power cable5. 
LaCie 700 Series CD with User Manual and monitor profiles6. 
LCD stand pin7. 
Quick Install Guide8. 
LaCie 724
Monitor1. 
DVI-D cable2. 
DVI-I cable3. 
USB cable4. 
AC power cable5. 
LaCie 700 Series CD with User Manual and monitor profiles6. 
LCD stand pin7. 
Quick Install Guide8. 
LaCie 730
Monitor1. 
DVI-D cable2. 
USB cable4. 
AC power cable5. 
LaCie 700 Series CD with User Manual and monitor profiles6. 
LCD stand pin7. 
Quick Install Guide8. 
ImpOrTANT INfO: Please keep the product box and pack -
ing materials, including the LCD stand pin, and store in a safe 
area  in  case  you  need  to  safely  transport  your  product  in  the 
future. In the event that the monitor should need to be repaired 
or serviced, it must be returned in its original packaging.
1
23
45
78
6
Downloaded from manualmonitor.com manuals
2   
2    
						

							LaCie 700 Series LCD Monitors Introduction
User Manual page 12
LaCie 700 Series LCD Monitors Introduction
User Manual page 12
About the LCD Stand Pin1.4. 
The monitor’s LCD stand is secured during transport using a pin 
near  the  base  of  the  stand.  Please  follow  the  procedure  below 
to remove it.Take the monitor out of the box and remove cushioning ma -
1. 
terial. Do not remove the pin yet. 
Place the monitor on a desk or other horizontal surface. 
2. Do 
not remove the pin yet. 
CAUTION:  If  the  pin  is  removed  while  the  product  is  on  its 
side, the stand may extend forcefully, causing it to hit the body 
of the handler or to fall, resulting in personal injury or damage 
to the product.
Peel off the seal and remove the pin.
3. 
Be  sure  to  keep  the  pin  in  an  easily  accessible  location,  as  it 
may  be  required  in  the  future  when  repacking  this  product  for 
transport.
When  transporting  the  monitor  in  the  future,  adjust  the  LCD  to 
its lowest position and insert the pin into the LCD stand base to 
lock it in place. The monitor can then be inserted back into the 
cushioning material and into its box.
 
						

							LaCie 700 Series LCD Monitors Introduction
User Manual page 13
LaCie 700 Series LCD Monitors Introduction
User Manual page 13
LaCie 720
LaCie 730
LaCie 724
3
11
2
2233
14
44
55
5
6
66
Monitor Views and Components1.5. 
Rear View
DVI video input1. 
LCD stand pin2. 
Power connector3. 
Kensington lock slot4. 
USB peripheral ports5. 
USB host port6. 
 
 
						

							LaCie 700 Series LCD Monitors Introduction
User Manual page 14
LaCie 700 Series LCD Monitors Introduction
User Manual page 14
Front View
LaCie 720 and 724
Power button1. 
OSD (On Screen Display) controls2. 
Color mode select3. 
NOTe: See sections 2.1 and 3.3 for instructions on using the 
power button and On Screen Display controls.LE D ba ckligh t
LED ba ckligh t
LaCie 730
Power button1. 
Brightness adjust buttons2. 
Color mode select3. 
NOTe: See sections  2.1 and 3.3 for instructions on using the 
power button and On Screen Display controls.
2
1
1
3
3
2
Downloaded from manualmonitor.com manuals   
						

							LaCie 700 Series LCD Monitors Getting Connected
User Manual page 15
Getting Connected2. 
Installing your LaCie 700 Series LCD Monitor is easy, requiring 
only a few simple connections:2.1. Connecting the Monitor to Your Compute
 ✦r
2.2. Connecting USB Device
 ✦s 
2.3. Installing an Alternative Stand or Attachment
 ✦
2.4. Ergonomic Adjustment ✦s
 
						

							LaCie 700 Series LCD Monitors Getting Connected
User Manual page 16
2.1. Connecting the Monitor to Your Computer
To  attach  the  LCD  monitor  to  your  computer,  follow  these  in-
structions:
Power off your computer.
1. 
Connect the signal cable (see Fig. 2.1):2. 
2a. For a PC or MAC with DVI digital output (A):
Connect the DVI signal cable to the DVI connector on your 
computer.  Connect  the  other  end  of  the  DVI  cable  to  the 
monitor’s DVI input. Tighten all screws.
2b. For a PC or MAC with Analog output:
Connect  the  15-pin  mini  D-SUB  to  DVI-A  signal  cable  (not 
included) to the connector of the display card in your system. 
Connect  the  other  end  of  this  cable  to  the  LCD  Monitor’s 
D-SUB (VGA) input.
Connect one end of the power cord 
3. (B) to the AC inlet on the 
back of the monitor and the other end to the power outlet.
Turn  on  the  main  monitor  power  with  the  switch  on  the  back, 
then  turn  on  the  display  with  the  power  button  on  the  front. 
Power  on  your  computer.  If  the  monitor  displays  and  image, 
installation is completed.
LaCie 730
LaCie 720 LaCie 724
A
A
B
B
B
A
Downloaded from manualmonitor.com manuals    
						

							LaCie 700 Series LCD Monitors Getting Connected
User Manual page 17
2.2. Connecting USB Devices
USB devices can be connected to the USB connectors located on 
the side of the monitor.  Connect the USB terminal on your computer to the USB host 
1. 
port  on  the  monitor.  The  monitor’s  USB  hub  is  now  con -
nected to your computer.
Connect USB peripherals to the USB connectors.
2. 
LaCie 730
LaCie 724
LaCie 720
 
						

							LaCie 700 Series LCD Monitors Getting Connected
User Manual page 18
Figure 2.5-A
2.3. Installing an Alternative Stand 
or Attachment
The base of the LaCie 700 Series Monitor can be disconnected 
to attach a flexible monitor arm or other attachment. Prepare the 
arm and screws required for installation beforehand. 
Step 1—Remove the base
Turn off your monitor and unplug the power cord.1. 
Lay  the  monitor  face-down  on  a  flat  surface  with  a  cushion 2. 
beneath it to protect the screen.
Remove  the  four  mounting  screws  from  the  base  (Figure 
3. 
2.5-A) and then remove the base.
Step 2—Attach a Base
NOTe: The LaCie 720 monitor accepts a 100 mm x 100 mm  
VESA-compliant mounting interface pad and the LaCie 724 & 
730  accpet  a  200  mm  x  100  mm  VESA-compliant  mounting 
interface pad.
Remove the base from the monitor as described in steps 1-3, 
1. 
above.
Align  the  mounting  interface  pad  with  the  holes  in  the  rear 
2. 
cover mounting pad and secure it with four screws that came 
with the arm-type base, wall mount hanger or other base.
CAUTION:  Do  not  use  screws  longer  than  the  standard  di -
mension, as they may damage the inside of the Monitor.
CAUTION:  For  wall  mounts  that  do  not  comply  with  VESA 
standard screw specifications, the length of the screws may dif -
fer depending on their specifications.
CAUTION:  Do  not  use  screws  that  do  not  comply  with  the 
VESA  standard  screw  specifications.  Do  not  fasten  the  screws 
too tightly, as this may damage the product or cause the prod -
uct  to  fall,  leading  to  personal  injury.  LaCie  is  not  liable  for 
these kinds of accidents.
CAUTION: LaCie is not liable for product damage or personal 
injury  when  a  non-VESA  or  nonspecified  wall  mount  is  used 
or the consumer fails to follow the product installation instruc -
tions.
CAUTION: To mount the monitor on a wall, you should pur-
chase the wall mounting kit that allows you to mount the moni -
tor at least 10cm away from the wall surface.
 
						

							LaCie 700 Series LCD Monitors Getting Connected
User Manual page 19
2.4. Ergonomic Adjustments 
CAUTION: Use care when raising, lowering, titling or swivel-
ing the monitor screen.
Raise and Lower Monitor Screen2.4.1. 
To raise or lower screen, place hands on each side of the moni-
tor and raise or lower to the desired height (Fig. 2.4.1).
Figure 2.4.2
Figure 2.4.1
LE D ba ckligh t
Figure 2.4.3
Screen Tilt2.4.2. 
Grasp the top and bottom sides of the monitor screen with your 
hands and adjust the tilt as desired (Fig. 2.4.2).
Swivel2.4.3. 
Grasp  both  sides  of  the  monitor  screen  with  your  hands  and 
adjust the swivel as desired (Fig. 2.4.3). 
NOTe:  The  base  of  the  monitor  is  designed  to  swivel  on  a 
hard, flat surface. The entire unit turns, not just the display.
 
						

							LaCie 700 Series LCD Monitors Getting Connected
User Manual page 20
L ED backlight
Portrait Mode (720 only)2.4.4. 
Grasp  both  sides  of  the  monitor  screen  with  your  hands  and 
adjust the swivel as desired (Fig. 2.4.4). Figure 2.4.4