Home > Kyocera > Printer > Kyocera TASKalfa 520i User Manual

Kyocera TASKalfa 520i User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Kyocera TASKalfa 520i User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 73 Kyocera manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							English 
    DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 19
    Emptying the Punch Waste Box
    If a message is displayed on the machine operation panel indicating that the waste punch box is full, be sure to 
    empty the scraps in the punch waste box. 
    Leave the main power switch on the machine switched ON ( | ) while performing this procedure.
    1Open the front cover.
    2Grasp the punch waste box handle and remove 
    the box from the Document Finisher.
    NOTE: Take care not to spill the waste hole punch 
    scraps when removing the container. 
    3Dispose of the hole punch scraps appropriately.
    4Re-install the punch waste box. Align it with the 
    guides in the Document Finisher.
    5Close the front cover.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							English 
    20  DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
    Troubleshooting
    Paper
    If ejected copies are not flat or are stacked unevenly, 
    turn over the paper in the cassette and reload it. If 
    copies are curled, refer to Curled Output on page 31.
    If a paper jam occurs, check the side guide located in 
    the cassette is adjusted to the size of paper loaded.
    Clearing Paper Jams
    When a paper jam occurs, copying stops and the machine operation panel will display a message indicating a 
    paper jam has occurred. 
    NOTE: Leave the main power switched ON ( | ) while performing the procedure to clear paper jams. The 
    machine operation panel will return to the display previous to the paper jam when the paper jam has been 
    cleared. 
    Coupling Section
    If the illustration shown displays on the machine’s 
    operation panel, there is a paper jam in the coupling 
    section between the Document Finisher and the 
    machine.
    1While pushing the finisher release lever, pull the 
    finisher out from the machine. 
    Downloaded From ManualsPrinter.com Manuals 
    						
    							English 
    DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 21
    2Remove the jammed paper.
    3Open the tray C and front cover.
    4Turn the conveyor knob (D2) to the left to feed the 
    paper along to enable easy removal. 
    5Close Tray C and the front cover, and re-install the 
    finisher back into position on the machine. 
    Tray A
    If the illustration shown displays on the machine’s 
    operation panel, there is a paper jam in the conveyor 
    section to Tray A.
    1Lift open Tray B and remove the jammed paper.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							English 
    22  DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
    2Open the front cover.
    3Pull out the inner tray (D5).
    4Open the inner tray cover (D6).
    5Remove the jammed paper.
    NOTE: If a jammed paper is located at the bottom of 
    the tray and it is difficult to remove, lift the inner tray 
    paper holder and remove the jammed paper from the 
    lower side of the tray.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							English 
    DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 23
    6Close the inner tray cover (D6).
    CAUTION: Close the inner tray cover (D6) securely 
    until the magnet catches.
    7Push the inner tray (D5) back into position and 
    close the front cover.
    Tray B
    If the illustration shown displays on the machine’s 
    operation panel, there is a paper jam in the conveyor 
    section to Tray B.
    1Remove any jammed paper from the ejection 
    section. 
    2Open the tray C.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							English 
    24  DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
    3Open the folding unit paper guide plate (D1) and 
    remove the jammed paper.
    4Open the front cover.
    5Turn the conveyor knob (D2) to the left to feed the 
    paper along to enable easy removal. 
    6Close the folding unit paper guide plate (D1).
    NOTE: Be sure to the close folding unit paper guide 
    plate (D1). Failure to do so will cause paper jams.
    7Close the tray C and front cover.
    Tray  C
    If the illustration shown displays on the machine’s 
    operation panel, there is a paper jam in the conveyor 
    section to Tray C.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							English 
    DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 25
    1While pushing the finisher release lever, pull the 
    finisher out from the machine. 
    2Open the top cover and remove the jammed paper.
    3Close the top cover and re-install the finisher back 
    into position on the machine. 
    Conveyor / Inner Tray
    If the illustration shown displays on the machines 
    operation panel, there is a paper jam in the conveyor 
    section to the inner tray.
    NOTE:  If frequent jamming occurs in the conveyor or 
    inner tray, the paper may be excessively curled. Adjust 
    curling referring to page 31 for when output pages are 
    curled.
    1Open the tray C and front cover.
    2Turn the conveyor knob (D2) to the left to feed the 
    paper along to enable easy removal. 
    3Follow step 3 onward on page 22 to remove 
    jammed paper. 
    Downloaded From ManualsPrinter.com Manuals 
    						
    							English 
    26  DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
    Mailbox (option)
    If the illustration shown displays on the machine’s 
    operation panel, there is a paper jam in the Mailbox.
    1Open the mailbox cover and remove the jammed 
    paper.
    2Close the mailbox cover.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							English 
    DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 27
    Center-Folding Unit (option)
    Conveyor Section
    If the illustration shown displays on the machine’s 
    operation panel, there is a paper jam in the conveyor 
    section of the Center-Folding Unit.
    1While pushing the finisher release lever, pull the 
    finisher out from the machine. 
    2Open the right cover (D8) and remove the jammed 
    paper.
    If there is no paper jam in the right cover (D8), 
    proceed to the following step. 
    3Close the right cover (D8) and re-install the finisher 
    back into position on the machine. 
    4Open the front cover.
    5Pull out the inner tray (D5).
    Downloaded From ManualsPrinter.com Manuals 
    						
    							English 
    28  DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
    6Open the inner tray cover (D6).
    7Remove the jammed paper.
    NOTE: If a jammed paper is located at the bottom of 
    the tray and it is difficult to remove, lift the inner tray 
    paper holder and remove the jammed paper from the 
    lower side of the tray.
    8Open the inner tray cover (D7) and remove the 
    jammed paper.
    9Close the inner tray cover (D6) and  inner tray 
    cover (D7).
    NOTE: Close the inner tray cover (D6) securely until 
    the magnet catches. 
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Kyocera manuals Comments (0)

    Related Manuals for Kyocera TASKalfa 520i User Manual