Kyocera TASKalfa 520i User Manual

Operation Guide
DF-760(B)  MT-720(B)  BF-720
PH-5A  PH-5B  PH-5C
Downloaded From ManualsPrinter.com Manuals 

Please read the Operation Guide before using this product. After reading, keep it close to the copier/printer 
for easy reference.
This guide mainly explains usage when used with the copier feature. See the Printer Driver User Guide for 
more information on usage from a computer when using the printer feature. 
Downloaded From ManualsPrinter.com Manuals 

 
DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 1
CONTENTS
Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Troubleshooting . . . . . . ....

 
2 DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals 

DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 3
English
Safety Information
Please read the Operation Guide before using this product. After reading, keep it close to the copier/printer for 
easy reference.
Refer to the Operation Guide for the copier/printer for information on the service representative for your product.
The sections of this Operation Guide and parts of this product marked with symbols are safety warnings. These 
are designed to protect the user, other individuals...

English 
4  DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
CAUTION LABELS
Caution labels have been attached to the Document Finisher at the following locations for safety purposes. BE 
VERY CAREFUL to avoid accidents such as trapping your foot when moving the finisher.
NOTE: DO NOT REMOVE THESE LABELS.
LABEL 1
CAUTION: Paper is ejected into 
the eject section at high speeds. 
Do not look into the eject section 
while the machine is in operation.
LABEL 2
The interior of this section...

English 
DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 5
INSTALLATION PRECAUTIONS
Environment
CAUTION
Avoid placing this product on or in locations which are unstable or not level. Such locations may cause 
the product to fall down or fall over. This type of situation presents a danger of personal injury or damage 
to the product.
Avoid locations near radiators, heaters, or other heat sources, or locations near flammable items, to avoid 
the danger of fire.
Other precautions
The...

English 
6  DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE If anything harmful (paper clips, water, other fluids, etc.) falls into this product, immediately turn the 
copier/printer OFF (O) at the main power switch, remove the copier/printer power plug from its outlet and 
then contact your service representative.  If you continue to use this product without taking these steps, 
there is a danger of fire or electrical shock.
ALWAYS contact your service representative for maintenance...

English 
DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 7
Names of Parts
Document Finisher (main body)
1Tray A
2Tray B
3Tray C
4Finisher release lever 
5Front cover
6Top cover
7Folding unit paper guide plate (D1)
8Conveyor knob (D2)
9Inner tray paper holder
10Inner tray confirmation window
11Inner tray (D5)
12Inner tray cover (D6)
13Inner tray cover (D7)
14Staple cartridge holder A
15Right cover (D8)
16Pressure roller bottom adjust knob (E1)
17Pressure roller top adjust knob...

English 
8  DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
Operation
Collate: ON Mode
Scan multiple originals and deliver complete sets of 
copies as required according to page number.
1Select Collate: On Mode on the operation panel of 
the machine.
2Load the originals in the Document Processor, or 
one at a time on the Platen.
NOTE: Refer to the Operation Guide for the machine 
for Document Processor and Platen specifications.
3Select other features as required and press Start....