Kyocera TASKalfa 300i User Manual

ix
Caution / Warning Labels
Caution / Warning labels have been attached to the machine at the following locations for safety purposes. Be 
sufficiently careful to avoi d fire or electric shock when removing a paper jam or when replacing toner.
High temperature inside. Do not 
touch parts in this area, because 
there is a danger of getting burned.
High temperature inside.
Do not touch parts in
this area, because 
there is a danger of 
getting burned.
Do not incinerate toner and toner container.
Dangerous...

x
Installation Precautions
Environment
CAUTION
Avoid placing the machine on or in locations which ar e unstable or not level. Such locations may cause 
the machine fall down or fall over. This type of situation presents a danger of personal injury or damage 
to the machine.
Avoid locations with humidity or dust and dirt. If dust or dirt become attached to the power plug, clean 
the plug to avoid the danger of fire or electrical shock.
Avoid locations near radiators, heaters or other heat  sources, or...

xi
• Avoid locations with direct exposure to hot or cold air.
• Avoid poorly ve
ntilated locations.
If the floor is delicate against casters,  when this machine is moved after installation, the floor material may be 
damaged.
During copying, some ozone is released, but the amount  does not cause any ill effect to one’s health. If, 
however, the machine is used over a long period of time in a poorly ventilated room or when making an 
extremely large number of copies, the smell may become unpleasant. To...

xii
Precautions for Use
Cautions when using the machine
WARNING
Do not place metallic objects or containers with water (flower vases, flower pots, cups, etc.) on or near 
the machine. This type of situation presents a danger  of fire or electrical shock should they fall inside.
Do not remove any of the covers from the machine as there is a danger of electrical shock from high 
voltage parts inside the machine.
Do not damage, break or attempt to repair the power cord. Do not place heavy objects on the...

xiii
CAUTION
Do not pull the power cord when removing it from the outlet. If the power cord is pulled, the wires may 
become broken and there is a danger of fire or electrical shock. (Always grasp the power plug when 
removing the power cord from the outlet.)
Always remove the power plug from the outlet when moving the machine. If the power cord is 
damaged, there is a danger of fire or electrical shock.
Always hold the designated parts only when lifting or moving the machine.
If this machine will be...

xiv
Cautions when handling consumables
CAUTION
Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks may cause 
burns.
Keep the toner container and the waste toner box out of the reach of children.
If toner happens to spill from the toner container or the waste toner box, avoid inhalation and ingestion, 
as well as contact with your eyes and skin.
• If you do happen to inhale toner, move to a place with fresh air and gargle thoroughly with a large amount of  water. If...

xv
SAFETY OF LASER BEAM (USA)
1. Safety of laser beam
This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards 
established by the U.S.DHHS (Department of Health an d Human Services) in 1968. This indicates that the 
product is safe to use during normal operation and maintenance. The laser optical system, enclosed in a 
protective housing and sealed within the external  covers, never permits the laser beam to escape.
2. The CDRH Act
A...

xvi
3. Optical unit
When checking the optical unit, avoid direct exposure to the laser beam, which is invisible. Shown at below is 
the label located on the cover of the optical unit.
4. Maintenance
For safety of the service personnel, follow the maintenance in structions in the other section of this manual.
5. Safety switch
The power to the laser unit is cut off when the front cover is opened.
Downloaded From ManualsPrinter.com Manuals 

xvii
Safety Instructions Regarding the Disconnection of Power (the United 
States)
Caution: The power plug is the main isolation device! Othe r switches on the equipment are only functional 
switches and are not suitable for isolat ing the equipment from the power source.
Attention: Le débranchement de la fiche secteur est le seul moyen de mettre l’appareil hors tension. Les 
interrupteurs sur l’appareil ne sont que des interrupteurs de fonctionnement: ils ne mettent pas l’appareil hors 
tension.
Other...

xviii
Warranty (the United States)
TASKalfa 300i
MULTIFUNCTIONAL PRODUCT LIMITED WARRANTY
Kyocera Mita America, Inc. and Kyocera Mita Canada, Ltd. (both referred to as “Kyocera”) warrant 
the Customer’s new Multifunctional Product (ref erred to as “MFP”), and the new accessories 
installed with the initial in stallation of the MFP, against any defects in material and workmanship for 
a period of one (1) year, or 300,000 copies/prints fr om date of installation, whichever first occurs. In 
the event the...