Kyocera KM 8030 User Manual

							Part Names
1-3
13Main Power Switch
14Main Power Switch Cover
15Document Processor Bottom Cover
16Original Size Indicator Plates
17Platen
18Front Cover
19Output Tray (Option)
20Handles
21Power Cord
13
1415
16
17
18 19
20
21
Downloaded From ManualsPrinter.com Manuals 
						

							Part Names
1-4
Document Processor
22Original Table
23Original Width Guides
24Cleaning Cloth Compartment
25Original Loaded Indicator
26Document Processor Top Cover
27Ejection Guide
28Document Processor Angle Adjustment Lever
29Original Eject Table
22 23
26
29 282423
27
25
Downloaded From ManualsPrinter.com Manuals 
						

							Part Names
1-5
Internal Parts
30Toner Container
31Toner Container Release Lever
32Paper Conveyor
33Knob A1
34Lever A2
35Knob A3
36Duplex Unit
37Paper Feeder
38Paper Width Guides
39Paper Width Adjusting Tab
40Paper Length Guide
41Paper Length Adjusting Tab
30 31
32
33
34
35
3637
38
39
41
40
Downloaded From ManualsPrinter.com Manuals 
						

							Part Names
1-6
Operation Panel
1Brightness Adjustment Dial
2Copy Key/Indicator
3Printer Key/Indicator
4Scanner Key/Indicator
5 Document Management Key/Indicator
6 Print Management Key/Indicator
7Repeat Copy Key/Indicator
8Job Build Key/Indicator
9 Auto Selection Key/Indicator
10 System Menu/Counter key
11 Job Accounting key
12 Interrupt Key/Indicator
13 Energy Saver Key/Indicator
14Touch Panel
15Numeric Keys
16 Reset Key
17 Stop/Clear Key
18 Start Key/Indicator
19 Power Key/Indicator
20Main Power Indicator
Ready to copy.11x8½ Paper  Si ze Set
4 i n 1
Sheet Ma r g i n
Left
Progr am Functi on User choice
Ba si c 11x8½
Plain
11x8½
Re cy cl e d
11x17
Plain
8½x11
Plain11x8½
Plain MP  tr a y
Plain APSAuto  %
Re du ce 100%
Exposur e Auto
Stapl e Stapl e
Left Top Stapl e Off100%
/Enlarge ModeExposur eEr ase
/Punch
2 1356789 101112
1613 19
414 182017 15
Downloaded From ManualsPrinter.com Manuals 
						

							Part Names
1-7
Touch Panel
1 [Basic] Screen
Press [Basic] to display 
this screen.
2 [User choice] Screen
Press [User choice] to 
display this screen.
3 [Function] Screen
Press [Function] to 
display this screen.
4 [Program] Screen
Press [Program] to 
display this screen.Ready to copy.11x8½ Paper  Size Set
4 in 1
Sheet Ma r g i n
Left
Pr ogr am Function User choice
Ba si c 11x8½
Pl ai n
11x8½
Re cy cl e d
11x17
Pl ai n
8½x11
Pl ai n11x8½
Pl ai n MP  tr a y
Pl ai n APSAuto  %
Re d u ce 100%
Exposur e Au to
Stapl e Stapl e
Left Top Stapl e Off100%
/Enlarge ModeExposur eEr ase
/ Punch
Ready to copy.11x8½ Paper  Size Set
4 in 1
Sheet Ma r g i n
Left
Pr ogr am Function
User choice Ba si c 2 sided/
Co mbi neOr i g.I mage
Book l e tCo v e rBor de r
Sel ect
Orig.Size Ma r g i n /
Ce n te r i n g Sor t/
Offse t
Page #100%
Separ ati on Qual i ty
Er ase Er ase
Mo d e
Ready to copy.11x8½ Paper  Size Set
4 in 1
Sheet Ma r g i n
Left
Pr ogr am
Function User choice Ba si c Exposur e Reduce
Co v e r
Bo ok l e tUp Ba tch
Scanni ng Auto
Selection
Bor de r Sel ect
Or i g.I mage2 si ded/
Ma r g i n /
Ce nte r i ng
Sor t/
Offse tSel ect
Orig.Size
Page #Co mbi ne
Form
Ov er l a yDown100%
Paper Separ ati on
Mode /Enl ar ge
Er ase ModeEr ase
Qual i ty
Ready to copy.11x8½ Paper  Size Set
Re g ./ D e l e te
Re g i ste r
Del ete
Ch a nge4 in 1
Er ase Ma r g i n
Left
Pr ogr am Function User choice Ba si cRe ca l l100%
NameSheet
Downloaded From ManualsPrinter.com Manuals 
						

							Part Names
1-8
Downloaded From ManualsPrinter.com Manuals 
						

							2-1
2 Preparing to Copy
This chapter explains the preparations required before using the copier.
• Loading Paper...2-2
• Specifying Paper Type and Size to the Cassettes and MP Tray...2-8
• Loading Originals...2-16
• Selecting the Language...2-20
Downloaded From ManualsPrinter.com Manuals 
						

							Preparing to Copy
2-2
Loading Paper
Load paper in the four cassettes, the MP tray and/or the optional side feeder. For details on the 
types of paper supported, refer to  Paper in the  Appendix  of the Advanced Operation Guide .
Before Loading Paper
When you open a new package of paper, follow the instructions as below to fan through the paper 
prior to loading.
1Holding the paper on both sides, bend the 
edges downward so that the middle curves 
upward.
2 Holding your thumbs in place toward the 
center, unbend the paper so that the 
bottom sheet is back at its original position. 
Your thumbs should prevent the stack from 
straightening out, forming a hill-like shape.
3 Fluff the paper, raising one hand and 
lowering the other, then alternating. The 
individual sheets are slightly lifted, 
separated from each other.
4 Align the sheets by tapping the stack on a flat surface.
If the paper is curled or folded, straighten it before  loading. Paper that is curled or folded may cause 
paper jams.
IMPORTANT:  If you copy onto used paper (paper already us ed for copying), do not use paper that 
is stapled or clipped together. This may damage the copier or cause poor image quality.
If ejected copies are not flat or are stacked unevenly, 
turn the paper in the cassette over and reload it.
Avoid exposing opened paper to high temperatures 
and high humidity as dampness may cause copying 
problems. Seal any remaining paper after loading the 
MP tray or a cassette in its original package. If the 
copier will not be used for a prolonged period, protect 
all paper from humidity by removing from the cassettes 
and sealing in the original package.
Loading Paper in Cassettes 1 and 2
Cassettes 1 and 2 support standard and recycled paper. Up to 1,500 sheets of standard paper 
(80 g/m²) may be loaded in each cassette.
The cassettes support 11 × 8
1/2 or A4 paper.
IMPORTANT:  Specify the type of paper loaded in the cassettes. Refer to  Specifying the Paper Type 
on page2-9 for details.
1Pull the cassette out toward you until it stops.
Downloaded From ManualsPrinter.com Manuals 
						

							Preparing to Copy2-3
2Align the paper flush against the right side of the 
cassette as you load it.
IMPORTANT: Before loading the paper, be sure that it 
is not curled or folded. Paper that is curled or folded 
may cause paper jams.
Ensure that the loaded paper does not exceed the 
level indicated.
3Gently push the  cassette back in.
Loading Paper in Cassettes 3 and 4
Cassettes 3 and 4 support standar d, recycled, and colored paper. Up to 500 sheets of standard 
paper (80 g/m²) (or 525 sheets for standard paper of 75 g/m²) can be loaded in each cassette.
The following paper sizes are supported: 11 × 17, 8 
1/2× 14, 11 × 8 1/2, 8 1/2× 11, 5 1/2×8 1/2, 
8
1/2×13, 8 1/2× 13 1/2, A3, B4, A4, A4R, B5, B5R,  A5R, Folio, 8K and 16K.
IMPORTANT: After loading paper, be sure to specify the type and size of the paper loaded in the 
cassettes on the operation panel. For further details, refer to  Specifying the Paper Size on page2-8 
and  Specifying the Paper Type  on page2-9.
1Pull the cassette out toward you until it stops.
2Using the paper length adjusting tab, move the plate to 
fit the paper.
NOTE:  Paper sizes are marked on the cassette.
Downloaded From ManualsPrinter.com Manuals 
						

							Preparing to Copy
2-4
3Holding the paper width adjusting tab both ends, move 
the paper width guide to fit the paper.
NOTE: Paper sizes are marked on the cassette.
To switch between inch and metric paper sizes, slide 
the size adjustment switch. 
1 Holding the paper width adjustment tab both ends, 
move the paper width guide to anywhere that the 
paper size scale is not indicated.
2 Rotate the size adjustment switch ( A) 90 degrees, 
horizontal to vertical. 
3 Slide the size adjustment lever ( B) to upper ( C) or 
lower ( I) position.
I : Inches
C : Metrics
4Align the paper flush against the right side of the 
cassette as you load it.
IMPORTANT:  Be sure that the paper length and width 
guides rest securely against the paper. If there is a 
gap, readjust the guides to fit the paper. The gap may 
cause paper jam.
Before loading the paper, be sure that it is not curled 
or folded. Paper that is curled or folded may cause 
paper jams. 
Ensure that the loaded paper does not exceed the 
level indicated. Paper that  exceeds the level indicated 
may cause paper jam.
4Rotate the size adjustm ent switch 90 degrees, vertical to horizontal. 
A
B
Downloaded From ManualsPrinter.com Manuals