Kyocera KM 8030 User Manual

ix
Energy Star Program
We have determined as a participating company in the International Energy Star Program that 
this product is compliant with the standards laid out in the International Energy Star Program.
International Energy Star Program has as its basic goals the promotion of efficient energy use 
and the reduction of the environmental pollution that accompanies energy consumption by 
promoting the manufacture and sale of products that fulfill program standards.
International Energy Star Program...

x
Safety Conventions in This Guide
Please read this Operation Guide before using the copier. Keep it close to the copier for 
easy reference.
The sections of this guide and parts of the copier marked with symbols are safety warnings 
meant to protect the user, other individuals and surrounding objects, and ensure correct and 
safe usage of the copier. The symbols and their meanings are indicated below.
Symbols
The   symbol indicates that the related section includes safety warnings. Specific points of...

xi
The z symbol indicates that the related section includes information on actions which must be 
performed. Specifics of the required action are indicated inside the symbol.
Please contact your service representative to order a replacement if the safety warnings in this 
Operation Guide are illegible or if the guide itself is missing. (fee required) .... [Alert of required action]
.... [Remove the power plug from the outlet]
.... [Always connect the machine to an outlet with a ground connection]...

xii
Caution Labels
Caution labels have been attached to the copier at the following locations for safety purposes. 
Be sufficiently careful to avoid fire or electric shock when removing a paper jam or when 
replacing toner.
NOTE: Do not remove these labels.
Label 1, 2
High temperature inside. Do not 
touch parts in this area, because 
there is a danger of getting burned.
Label 3
High voltage inside. Never touch parts 
in this area, because there is a danger 
of electric shock. 
Label 4, 10
High...

xiii
Installation Precautions
Environment
Caution
Avoid placing the copier on or in locations which are unstable or not level. Such 
locations may cause the copier to fall down or fall over. This type of situation presents 
a danger of personal injury or damage to the copier.
Avoid locations with humidity or dust and dirt. If dust or dirt become attached to the 
power plug, clean the plug to avoid the danger of fire or electrical shock.
Avoid locations near radiators, heaters, or other heat sources, or...

xiv
If the floor is delicate against casters, when this product is moved after installation, the floor 
material may be damaged.
During copying, some ozone is released, but the amount does not cause any ill effect to one’s 
health. If, however, the copier is used over a long period of time in a poorly ventilated room or 
when making an extremely large number of copies, the smell may become unpleasant. To 
maintain the appropriate environment for copy work, it is suggested that the room be properly...

xv
Do not damage, break or attempt to repair the power cord. Do not place heavy 
objects on the cord, pull it, bend it unnecessarily or cause any other type of damage. 
These types of situations present a danger of fire or electrical shock.
Never attempt to repair or disassemble the copier or its parts as there is a danger of 
fire, electrical shock or damage to the laser. If the laser beam escapes, there is a 
danger of it causing blindness.
If the copier becomes excessively hot, smoke appears from the...

xvi
When lifting or moving the copier, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit boards. They could be 
damaged by static electricity.
Do not attempt to perform any operations not explained in this handbook.
Caution: Use of controls or adjustments or performance of procedures other than those 
specified herein may result in hazardous radiation exposure.
Do not look directly at the light from the scanning lamp as it may cause your eyes to...

xvii
Laser Safety (Europe)
Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted 
inside this machine is hermetically sealed within the protective housing and external cover. In 
the normal operation of the product by user, no radiation can leak from the machine.
This machine is classified as Class 1 laser product under IEC 60825.
Caution: Performance of procedures other than those specified in this manual may result in 
hazardous radiation exposure.
These labels...

xviii
Safety Instructions Regarding the Disconnection of Power
Caution: The power plug is the main isolation device! Other switches on the equipment are only 
functional switches and are not suitable for isolating the equipment from the power source.
VORSICHT: Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen Schalter auf dem 
Gerät sind nur Funktionsschalter und können nicht verwendet werden, um den Stromfluß im 
Gerät zu unterbrechen.
DECLARATION OF CONFORMITY
TO
89/336/EEC, 73/23/EEC and...