Kyocera FS C5350DN User Manual

							Printing Operation 2-7
AppleTalk
This section explains the procedure for enabling AppleTalk. 
1Enter the administrator ID and password. Then, if AppleTalk is set 
to  Off, use U  or V to select On.
2Press  [OK]. A blinking question mark ( ?) appears.
3Press  [OK] again.
4Press  [MENU] . The display returns to Ready .
IPP
This section explains the procedure for enabling IPP. 
1Enter the administrator ID and password. Then, if  IPP is set to Off, 
use  U or  V to select On.
2Press  [OK]. A blinking question mark ( ?) appears.
3Press  [OK] again.
4Press  [MENU] . The display returns to Ready .
>AppleTalk
  On
>AppleTalk
 ?On
>IPP
  On
>IPP
 ?On
Downloaded From ManualsPrinter.com Manuals 
						

							2-8Printing Operation 
SSL Server
This section explains the procedure for enabling SSL Server.
1Enter the administrator ID and password. Then, if SSL Server is set 
to Off , use U  or V to select  On and press  [OK].
2Press  Z. Each time you press  U or  V, the selection changes.
3Display the item you want to set and press  [OK]. A blinking question 
mark ( ?) appears.
4Select  On or  Off  using  U or  V.
5Press  [OK].
6Press  [MENU] . The display returns to  Ready.
IPSec
This section explains the procedure for enabling IPSec.
1Enter the administrator ID and password. Then, if  IPSec is set to 
Off , use U  or V to select On.
2Press  [OK]. A blinking question mark ( ?) appears.
3Press  [OK] again.
4Press  [Menu] . The display returns to Ready .
>SSL Server    >
  On
>>3DES
  Off
>>AES
  Off
>>IPP over SSL
  Off
>>HTTPS
  Off
>>DES
  Off
>>DES
 ?Off
>IPSec
  On
>IPSec
 ?On
Downloaded From ManualsPrinter.com Manuals 
						

							Printing Operation 2-9
Security Level
Security Level is primarily a menu used by service personnel for 
maintenance work. There is no need for customers to use this menu.>Security Level
  High
Downloaded From ManualsPrinter.com Manuals 
						

							2-10Printing Operation 
Printing a Network Interface Status Page
You can print out a status page for the network interface. The network 
status page shows the network addresses, and other information under 
various network protocols about the network interface.
Adjust/Maintenance
Adjust/Maintenance is used to adjust the print quality and to carry out 
printer maintenance.
The options available in Adjust/Maintenance are as follows:
• Color Calibration
• Registration Normal
• Registration Details
• Restart Printer
• Service
IMPORTANT  Service is primarily a menu used by service 
personnel for maintenance work. There is no need for customers to 
use this menu.
1Press  [MENU] .
2Press U or  V repeatedly until  Adjust/Maintenance >  appears.
3Press Z while  Adjust/Maintenance >  is displayed.
4Press U or  V repeatedly until  >Service > appears.
5Press Z.
6Press  U or  V repeatedly until  >>Print Network Status Page  
appears.
7Press  [OK]. A question mark ( ?) appears.
8Press  [OK]. Processing  appears and a status page is printed out.
9When printing ends, the display returns to  Ready.
Adjust/        >
Maintenance
>>Print Network
 Status Page ?
Downloaded From ManualsPrinter.com Manuals 
						

							Printing Operation 2-11
Installing the Printer Driver
Ensure the printer is plugged in and connected to the PC before installing 
the printer driver from the CD-ROM.
Installing the Software in Windows
If you are connecting this printer to a Windows PC, follow the next steps 
to install the printer driver. The example shows you how to connect your 
printer to a Windows Vista PC.
You can use either Express Mode or Custom Mode to install the software. 
Express Mode automatically detects connected printers and installs the 
required software. Use Custom Mode if you want to specify the printer 
port and select the software to be installed.
1Turn on the computer and start up Windows.
If the Welcome to the Found New Hardware Wizard dialog box 
displays, select Cancel.
2Insert the CD-ROM supplied with the printer into the optical drive of 
the PC. In Windows Vista, the user account management window 
appears. Click  Allow.
The installation program launches.
3Click  View License Agreement  and read the License Agreement. 
Click  Accept .
4Click Install software .
The software install wizard starts up. Click  Next.
From this point, the procedure differs depending on your version of 
Windows and your connection method. Proceed to the correct 
procedure for your connection type.
• Express Mode
• Custom Mode 
Note  In Windows Vista, Windows XP and Windows 2000, you 
must be logged on with administrator privileges.
Note  If the software install wizard does not launch 
automatically, open the CD-ROM window in Windows 
Explorer and double-click  Setup.exe.
Downloaded From ManualsPrinter.com Manuals 
						

							2-12Printing Operation 
Express Mode
In Express Mode, the installer automatically detects the printer when it is 
turned on. Use Express Mode for standard connection methods.
1In the installation method selection window, select Express Mode. 
The print system detection window appears and the installer detects 
the connected printers. If the installer does not detect a print system, 
check that the print system is connected via USB or a network and 
that it is turned on. Then return to the print system detection window.
2Select the print system to be installed and click Next .
3You can customize the print system name in the installation settings 
window. This will be the name displayed in the Printer window and in 
the printer lists displayed in applications. Specify whether to share the 
print system name or set the print system as an existing printer and 
then click Next.
IMPORTANT   Step 3 only appears if the print system is connected 
via a network. It does not appear if the print system is connected 
via a USB.
4A window appears in which you can check the settings. Check the 
settings carefully and then click  Install.
5A message appears saying that the printer has been installed 
successfully. Click  Exit to exit the printer installation wizard and 
return the CD-ROM main menu.
If the device setup dialog box appears after you click  Exit, you can 
specify the settings for items such as optional features installed in the 
print system. You can also specify the device settings after you exit 
the installation. For details, refer to Device Settings in the printer 
driver operation manual on the CD-ROM. 
This completes the printer driver installation procedure. Follow the 
on-screen instructions to restart the system, if required.
Note  While the information shown in Windows Vista and 
Windows XP installation dialog boxes differs slightly, the 
installation procedure is the same.
Note  If the Found New Hardware Wizard appears, click 
Cancel. If a hardware installation warning message appear, 
click  Continue .
Note  If the Windows security window appears, click  Install 
this driver software .
Downloaded From ManualsPrinter.com Manuals 
						

							Printing Operation 2-13
Custom Mode 
Use Custom Mode if you want to specify the printer port and select the 
software to be installed.
For example, if you do not want fonts installed on your computer to be 
replaced, select Custom Mode and deselect the Fonts  checkbox in the 
installation window.
1Select  Custom Mode.
2Following the instructions in the install wizard window, select the 
software packages to be installed and the specify the port, etc.
For details, refer to  Custom Installation in the printer driver operation 
manual on the CD-ROM. 
Installation on a Macintosh
1Turn on the printer and the Macintosh.
2Insert the included CD-ROM ( Product Library) into the CD-ROM 
drive.
3Double-click the CD-ROM icon.
4Double-click either  OS X 10.2 and 10.3 Only  or OS X 10.4 or higher 
depending on your Mac OS version.
5Double-click  Kyocera OS X x.x . 
Downloaded From ManualsPrinter.com Manuals 
						

							2-14Printing Operation 
6The printer driver installation program starts up.
7Choose Select Destination, Installation Type and then install the 
printer driver as directed by the instructions in the installation 
software.
IMPORTANT   In the Authenticate screen, enter the name and 
password used to log in to the operating system.
This completes the printer driver installation. Next, specify the print 
settings.
If an IP or AppleTalk connection is used, the settings below are 
required. If a USB connection is used, the printer is automatically 
recognized and connected.
8Open System Preferences  and click Print & Fax .
9Click the plus symbol (+) to add the installed printer driver.
Note  In addition to  Easy Install, the Installation Type  
options include  Custom Install, which allows you to specify 
the components to be installed.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing Operation 2-15
10Click the IP icon for an IP connection or the AppleTalk icon for an 
AppleTalk connection and then enter the IP address and printer 
name.
11Select the installed printer driver and click Add.
12Select the options available for the printer and click  Continue.
Downloaded From ManualsPrinter.com Manuals 
						

							2-16Printing Operation 
13The selected printer is added. This completes the printer setup 
procedure.
Downloaded From ManualsPrinter.com Manuals