Kyocera FS C5200DN User Manual

 xi
Safety Infor mation
Laser Safety
This printer is certified as a Class 1 laser product under the U.S. 
Department of Health and Human Services (DHHS) Radiation 
Performance Standard according to Radiation Control for Health and 
Safety Act of 1968. This means that the printer does not produce 
hazardous laser radiation. Since radiation emitted inside the printer is 
completely confined within protective housings and external covers, the 
laser beam cannot escape from the printer during any phase of...

xii 
Cautionary Labels
The printer bears any of the following labels.
For Europe, Asia, and other countries
For U.S.A. and CanadaHigh temperature inside. Do 
not touch parts in this area, 
because there is a danger of 
getting burned.
Label inside the printer (Laser radiation warning)
Downloaded From ManualsPrinter.com Manuals 

 xiii
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food 
and Drug Administration implemented regulations for laser products on 
August 2, 1976. These regulations apply to laser products manufactured 
after August 1, 1976. Compliance is mandatory for products marketed in 
the United States. A label indicating compliance with the CDRH 
regulations must be attached to laser products marketed in the United 
States.
Ozone concentration
The printers generate ozone gas (O3)...

xiv 
Canadian Department of Communications Compliance 
Statement
This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformité aux normes du ministère des 
Communications du Canada 
Cet appareil numérique de la classe B est conforme à la norme NMB-003 
du Canada.
EN ISO 7779
Maschinenlärminformations-Verordnung 3. GPSGV, 06.01.2004: Der 
höchste Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß EN ISO 
7779.
Disclaimer
Kyocera Mita will not be liable to customers or any other...

 xv
Energy Saving Control Function
The device comes equipped with a Sleep Mode where printer functions 
remain in a waiting state but power consumption is still reduced to a 
minimum when there is no activity with the device within a set amount of 
time.
Sleep
The device automatically enters Sleep when 30 minutes have passed 
since the device was last used. The amount of time of no activity that must 
pass before Sleep is activated may be lengthened. For more information, 
refer to Sleep Timer (Sleep...

xvi 
Installation Precautions
Environment
Other Precautions
Adverse environmental conditions may affect the safe operation and 
performance of the printer. Install in an air-conditioned room 
(recommended room temperature: around 23 °C, humidity: around 60 % 
RH) and avoid the following locations when selecting a site for the printer.
- Avoid locations near a window or with exposure to direct sunlight.
- Avoid locations with vibrations.
- Avoid locations with drastic temperature fluctuations.
- Avoid...

 xvii
Power Supply/Grounding the Printer
Other Precautions
Connect the power plug to the closest outlet possible to the printer.
Handling of Plastic Bags
WARNING  Do not use a power supply with a voltage other 
than that specified. Avoid multiple connections in the same 
outlet. These types of situations present a danger of fire or 
electrical shock.
Plug the power cord securely into the outlet. If metallic objects 
come in contact with the prongs on the plug, it may cause a fire 
or electric shock....

xviii 
Precautions for Use
Cautions when Using the Printer
•Do not place metallic objects or containers with water (flower vases, 
flower pots, cups, etc.) on or near the printer. This type of situation 
presents a danger of fire or electrical shock should they fall inside. 
•Do not remove any of the covers from the printer as there is a danger 
of electrical shock from high voltage parts inside the printer. 
•Do not damage, break or attempt to repair the power cord. Do not 
place heavy objects on the...

 xix
Other Precautions
•Do not place heavy objects on the printer or cause other damage to 
the printer.
•Do not open the top/left/rear cover, turn off the main switch, or pull out 
the power plug during printing.
• During printing, some ozone is released, but the amount does not 
cause any ill effect to ones health. If, however, the printer is used over 
a long period of time in a poorly ventilated room or when printing an 
extremely large number of copies, the smell may become unpleasant. 
To maintain...

xx 
About the Operation Guide
This Operation Guide has the following chapters:
Chapter 1 - Machine Parts
This chapter explains the names of parts.
Chapter 2 - Printing Operation
This chapter explains how to print from your workstation.
Chapter 3 - Maintenance
This chapter explains how to replace the toner container and how to care 
for your printer.
Chapter 4 - Troubleshooting
This chapter explains how to handle printer problems that may occur, 
such as paper jams.
Chapter 5 - Specifications
This chapter...