Kyocera FS 1016MFP User Manual

System Settings 
OPERATION GUIDE8-5
Printing the Report Pages
The following table shows the reports that are available for printing.
1Access 3. Report.
If you are unsure how to use this route map refer to Accessing Menu Items on 
page xx.
2Press W or X to select 31. Configuration, 32. Menu map or 33. 
Usage report and press [OK]. Printing of the report will begin. The display 
returns to the ready screen. Item Description
31. ConfigurationLists information on the settings and environments of 
use for...

System Settings 
8-6OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals 

OPERATION GUIDE9-1
9 Maintenance
Toner Container Replacement
The toner container requires replacing when empty. A starter toner container 
provides approximately 3000 prints. A full toner container is offered in two yield 
types, 2000 or 6000 pages (at 5% coverage).
The machine displays messages at two stages of toner usage.
• When the machine becomes low on toner, the machine displays the message 
Toner Low as the first caution. Note the replacement is not always necessary 
at this stage.
• If you...

Maintenance 
9-2OPERATION GUIDE
3Turn Lock Lever A to the unlock position, 
push Lock Lever B to the right and pull out 
the Toner Container.
Place the used Toner Container in the 
plastic bag provided for disposal.
4Remove the packaging from the new Toner 
Container. 
Shake the container horizontally to 
distribute the toner evenly.
5Remove the label from the Toner Container. 
6Install the new Toner Container in the 
printer. Push firmly on the top of the 
container at the positions marked PUSH 
HERE,...

Maintenance 
OPERATION GUIDE9-3
8Close the Front Cover.
9Close the Scan Unit pushing the Lever.
IMPORTANT: Take care not to place your 
fingers between the scan unit and the main 
body when the scan unit is closed. 
Cleaning the Charger and Registration Roller
To avoid print quality problems, the interior of the machine must be cleaned with 
every Toner Container replacement.
1Open the Scan Unit.
Downloaded From ManualsPrinter.com Manuals 

Maintenance 
9-4OPERATION GUIDE
2Open the Front Cover.
3Lift the Developer Unit together with the 
Toner Container out of the printer.
4Using the green handles lift the Drum Unit 
out of the machine.
NOTE: The Drum Unit is sensitive to light. 
Never expose the Drum Unit to light for 
more than five minutes.
5Place the Drum Unit flat on a clean, level 
surface.
IMPORTANT: Do not place the Drum Unit 
on end.
6Use a clean, lint free cloth to clean dust and 
dirt away from the metal Registration Roller...

Maintenance 
OPERATION GUIDE9-5
7Slide the Charger Cleaner (green) back and 
forth 2 or 3 times to clean the charger wire, 
then return it to its original position.
8When cleaning is complete, return the Drum 
Unit to its position, aligning the guides at 
both ends with the slots in the machine. 
9Insert the Developer Unit together with the 
Toner Container, back into the machine.
10Close the Front Cover.
11Close the Scan Unit pushing the Lever.
Downloaded From ManualsPrinter.com Manuals 

Maintenance 
9-6OPERATION GUIDE
IMPORTANT: Take care not to place your 
fingers between the scan unit and the main 
body when the scan unit is closed. 
Cleaning the Machine
CAUTION: For safety purposes, always remove the power cord from the outlet 
when performing cleaning.
Always use a soft cloth dampened with alcohol or mild detergent to clean the 
machine.
Open the Document Processor and wipe 
the gray portion, as shown in the illustration.
If copies appear soiled while using the 
document processor...

Maintenance 
OPERATION GUIDE9-7
3Wipe the Pad from top to bottom. Be careful 
not to snag the Pick Spring.
Replacing the Document Processor Pad
After scanning approximately 50,000 pages through the Document Processor, the 
pressure pad may be worn out and you may experience problems with document 
feeding. In this case, it is highly recommended that you replace the pad with a new 
one. Consult your nearest service representative or authorized service center to 
order a document processor pad, and follow...

Maintenance 
9-8OPERATION GUIDE
Shipping Lock
Always slide shipping lock to Lock position 
before moving this machine from one 
location to another. And slide to Unlock 
position before using it.
Downloaded From ManualsPrinter.com Manuals