Konica Minolta magicolor 4750DN User Manual
Have a look at the manual Konica Minolta magicolor 4750DN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Clearing Media Misfeeds 9-14 Clearing a Media Misfeed from the Fuser Unit 1Pull the lever, and then open the right side cover. Before opening the right side cover, fold up Tray 1. 2Open the eject cover. 3Lift up the 2 levers. Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds9-15 4Open the fuser unit cover. 5Carefully pull out the misfed media. Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds 9-16 If the misfed media cannot be removed by pulling it down, pull it from the top of the fuser unit. Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds9-17 CAUTION The area around the fuser unit is extremely hot. Touching anything other than the indicated levers may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. Note Decreased print quality may result if the surface of the image transfer belt or the transfer roller is touched. Be careful not to touch the surface of the image transfer belt or transfer roller. Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds 9-18 6Close the fuser unit cover. 7Push down the 2 levers. 8Close the eject cover. Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds9-19 9Close the right side cover. Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds 9-20 Clearing a Media Misfeed from Tray 1 (Manual Feed Tray) and Transfer Roller 1Pull the lever, and then open the right side cover. Before opening the right side cover, fold up Tray 1. 2Carefully pull out the misfed media. Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds9-21 CAUTION The area around the fuser unit is extremely hot. Touching anything other than the indicated levers may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. Note Decreased print quality may result if the surface of the image transfer belt or the transfer roller is touched. Be careful not to touch the surface of the image transfer belt or transfer roller. Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds 9-22 3Close the right side cover. Downloaded From ManualsPrinter.com Manuals
Solving Problems with Media Misfeeds9-23 Solving Problems with Media Misfeeds Frequent misfeeds in any area indicate that area should be checked, repaired, or cleaned. Repeated misfeeds may also happen if you’re using unsupported print media. Symptom Cause Solution Several sheets go through the printer together.The front edges of the media are not even.Remove the media and even up the front edges, then reload it. The media is moist from humidity.Remove the moist media and replace it with new, dry media. Media mis- feed mes- sage stays on.Right side cover needs to be opened and closed again to reset the printer.Open and close the right side cover of the printer again. Some media remains misfed in the printer.Recheck the media path and make sure that you have removed all of the misfed media. Duplex mis- feeds.Unsupported media (wrong size, thick- ness, type, etc.) is being used.Use KONICA MINOLTA-approved media. See “Media Specifications” on page 6-2. Only plain paper, special paper and thick stock, 60–210 g/m 2 (16–55.9 lb) can be autoduplexed. See “Media Specifications” on page 6-2. Make sure that you have not mixed media types in Tray 1 or 2. Do not duplex (double-sided) enve- lopes, labels, letterhead, postcards, glossy or single side only paper. Media is still being misfed.Recheck the media path inside the duplex option and make sure that you have removed all of the misfed media. Downloaded From ManualsPrinter.com Manuals