Konica Minolta bizhub C20 User Manual

5Camera Direct
Downloaded From ManualsPrinter.com Manuals 

Camera Direct 148
Camera Direct
If a digital camera with PictBridge (1.0 or later) is connected to the machine 
through the USB HOST port, images stored on the digital camera can be 
printed directly from the machine.
For details on using the digital camera, refer to your digital cameras 
manual.
The following features are not supported with Camera Direct.
- DPOF AUTOPRINT image print
- Borderless
- Cable disconnect enable (printer status information)
- DPOF cable disconnect recovery
Printing Directly...

6Memory Direct
Downloaded From ManualsPrinter.com Manuals 

Memory Direct 150
Memory Direct
PDF, XPS, JPEG and TIFF files saved on USB memory devices can be 
printed by plugging the USB memory device into the machine.
Memory direct can be used only if the optional hard disk kit or a Com-
pactFlash card is installed.
In order to perform collated printing with memory direct, the optional 
hard disk kit or a CompactFlash card of 1 GB or more must be 
installed.
For details on specifying settings with the control panel, refer to “MEM-
ORY PRINT Menu” on page 101....

Memory Direct 151
6Press the Start-Color key or the Start-B&W key to begin printing.
Do not unplug the USB memory device from the USB HOST port 
during memory direct printing.
Downloaded From ManualsPrinter.com Manuals 

Memory Direct 152
Downloaded From ManualsPrinter.com Manuals 

7Using the Copier
Downloaded From ManualsPrinter.com Manuals 

Making Basic Copies 154
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and 
the functions that are frequently used when making copies, such as specify-
ing the zoom ratio and the copy density.
Before making copies, check that the Copy key is lit up in green.
If the key is not lit up in green, press the Copy key to enter Copy 
mode.
The default paper size setting can be changed with PAPER SETUP in 
the 
UTILITY menu. For details, refer to “PAPER SETUP Menu”...

Making Basic Copies 155
3Specify the desired copy settings.
For details on specifying the copy mode and the copy density, refer 
to “Specifying the Copy Quality Setting” on page 155.
For details on specifying the zoom ratio, refer to “Specifying the 
Zoom Ratio” on page 156.
For details on selecting the media tray, refer to “Selecting the 
Media Tray” on page 157.
For details on setting 2in1 and 4in1 copying, refer to “Setting 2in1/
4in1 Copying” on page 158.
For details on ID card copying, repeat...

Making Basic Copies 156
Specifying the Copy Density
1In the main screen (Copy mode), press the + or , key to select the cur-
rent copy quality setting, and then press the Select key.
2Press the + or , key to select DENSITY, and then press the Select key.
3Press the * or ) key to select the desired copy density, and then press 
the Select key.
As the indicator is moved to right, the density becomes darker.
If TEXT or FINE/TEXT is selected as the copy mode, select 
either 
AUTO or MANUAL in step 3. If...