Konica Minolta bizhub C20 User Manual

Loading Media 117
2Slide the media guides to pro-
vide more space between them.
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
4Load the paper face down in the 
tray.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 118
Do not load so much 
paper that the top of the 
stack is higher than the 
maximum limit guide. Up 
to 100 sheets (80 g/m
2 
[22 lb]) of plain paper can 
be loaded into the tray at 
one time.
5Slide the media guides against 
the edges of the paper.
6Select PAPER SETUP/TRAY1 PAPER in the UTILITY menu, and 
then select the settings for the size and type of paper that is loaded. See 
also “Specifications” on page 106.
Other Media
When loading media other than plain paper, set the media...

Loading Media 119
Loading Envelopes
1Open Tray 1.
2Slide the media guides to pro-
vide more space between them.
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 120
4Load the envelopes flap side up 
in the tray. 
Before loading enve-
lopes, press them down 
to make sure that all air is 
removed, and make sure 
that the folds of the flaps 
are firmly pressed; other-
wise the envelopes may 
become wrinkled or a 
media misfeed may 
occur.
Up to 10 envelopes can be loaded into the tray at one time.
For envelopes with the 
flap along the long edge 
(Envelope Chou #3, 
Envelope C6, Envelope 
Monarch and Envelope 
DL), load the envelopes 
with the flap...

Loading Media 121
6Select PAPER SETUP/TRAY1 PAPER in the UTILITY menu, and 
then select the settings for the size and type of media that is loaded. See 
also “Specifications” on page 106.
Loading Label Sheets/Letterheads/Postcards/Thick Stock/
Glossy Media and Transparencies
1Open Tray 1.
2Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 122
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
4Load the media face down in the 
tray.
Up to 20 sheets can be 
loaded into the tray at 
one time.
5Slide the media guides against 
the edges of the media.
6Select PAPER SETUP/TRAY1 PAPER in the UTILITY menu, and 
then select the settings for the size and type of media that is loaded. See 
also “Specifications” on page 106.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 123 Tray 2
Only plain paper can be loaded in Tray 2.
Loading Plain Paper
1Pull out Tray 2.
2Press down the media pressure 
plate to lock it into place.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 124
3Slide the media guides to pro-
vide more space between them.
4Load the paper face up in the 
tray.
Do not load above the  
mark. Up to 250 sheets 
(80 g/m2 [22 lb]) of plain 
paper can be loaded into 
the tray at one time.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 125
5Slide the media guides against 
the edges of the paper.
6Close Tray 2.
7Select PAPER SETUP/TRAY2 PAPER in the UTILITY menu, and 
then select the settings for the size of paper that is loaded. See also 
“Specifications” on page 106.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 126
Tray 3 (Optional Lower Feeder Unit)
Only plain paper can be loaded in Tray 3.
Loading Plain Paper
1Pull out Tray 3.
2Press down the media pressure 
plate to lock it into place.
3Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals