Konica Minolta bizhub 751 User Manual

							3Easy installation using the 
installer (Windows)
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2083-2
Easy installation using the installer (Windows)3
3 Easy installation using the installer (Windows)
3.1 Installer
This installer automatically detects whether this machine is connected via USB or on the same TCP/IP 
network as the computer, then installs the required printer driver. You can also manually specify the 
connection destination during installation.
2
Reminder 
When installing the driver on NT 4.0/2000/XP/Vista/Server 2003, administrator permissions are 
required.
When this machine is connected via USB, if a wizard for adding new hardware starts up, click the 
[Cancel] button.
The installer supports installation in both IPv4 and IPv6 environments of Windows Vista/Server 2008/7 
only. Note that it does not support Secure Printing (IPPS) in Windows Vista/Server 2008/7 and 
Internet Printing (IPP) in the IPv6 environment.
3.1.1 Installer operating environment
* With Windows NT 4.0, in order to install this machine connected directly to a network using the TCP/IP protocol, 
Microsoft TCP/IP Print Services must first be installed on the computer.
ItemOperating environment
Operating system32bit editions
Windows NT Workstation 4.0/Server 4.0 (Service Pack 6 or later)*
Windows 2000 Professional/Server
(Service Pack 3 or later)
Windows XP Home/Professional
(Service Pack 2 or later)
Windows Server 2003 Standard
Windows Vista (All versions)
Windows 7 (All versions)
Windows Server 2008 (All versions)
64bit editions
Windows XP Professional
(Service Pack 2 or later)
Windows Server 2003
Windows Vista (All versions)
Windows Server 2008 (All versions)
Windows Server 2008 R2 (All versions)
Windows 7 (All versions)
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2083-3
Easy installation using the installer (Windows)3
3.2 Easy installation using the installer
3.2.1 Settings of this machine
Specify the IP address of this machine.
2
Note 
To allow this machine to be automatically detected when connected to a network, be sure to set the IP 
address for this machine before starting installation. For details, refer to the User’s Guide [Network 
Administrator].
Depending on the connection method and protocol, change the network settings of this machine.
-Port9100: Enable the RAW port number (9100 at default), in the TCP/IP screen.
-IPP/IPPS: Enable IPP print in the IPP Setting screen.
2
Note 
For details on the TCP/IP settings and IPP settings of this machine, refer to the User’s Guide [Network 
Administrator].
To use IPPS printing, the certificate must be registered to this machine. For details, refer to the User’s 
Guide [Network Administrator].
3.2.2 Installation of the printer driver
!
Detail 
If the User Account Control window appears when installing on Windows Vista/Server 2008/7, click the 
[Allow] button or the [Continue] button.
1Insert the Driver CD into the CD-ROM drive of the computer.
– Check that the installer starts up, and then continue with step 2.
– If the installer does not start up, open the printer driver folder on the CD-ROM, double-click 
Setup.exe for the 32bit editions OS and Setup64.exe for the 64bit editions OS, and then 
proceed to Step 3.
2Click the Printer Install button.
The installer of the printer driver starts.
3If you agree with all terms and conditions of the license agreement, click the [AGREE] button.
– If not, the software cannot be installed.
– In the language display box, you can change the language used with the installer as required.
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2083-4
Easy installation using the installer (Windows)3
4If the setup selection window appears, select Install printers/MFPs, and then click the [Next] button. 
The connected printers and MFP are detected.
– In Windows Vista/Server 2008/7, you can select Preference for IPv4 or Preference for IPv6. If 
the printer/MFP is detected using both IPv4 and IPv6, the selected address is prioritized.
– If the printer is not detected, turn off this machine, then on again.
– When turning off the power, then on again, wait at least 10 seconds before turning it on again. 
Otherwise, this machine may not function properly.
5Select this machine, and then click the [Next] button.
– If the connection of this machine cannot be recognized, this machine is not listed. If this is the case, 
select Specify the Printer/MFP Except for the Above. (IP Address, Host Name...), and then specify 
this machine manually.
– In addition to Normal Printing (Port 9100 and USB), Internet Printing (IPP) and Secure Printing 
(IPPS) can be selected as the printing method. Secure Printing (IPPS) can be used when SSL is 
enabled from PageScope Web Connection and IPP is enabled.
– When using Windows Vista/Server 2008/7, the IPPS connection can not be setup using the installer. 
For using IPPS connection, setup the connection using the Add Printer Wizard. For details, refer 
to Network connection (IPP or IPPS) on page 4-17.
– Windows Vista/Server 2008/7 supports both IPv4 and IPv6 environments, however, it does not 
support Internet Printing (IPP) in the IPv6 environment.
6Check the installation settings.
– To change the settings, click the [Installation Settings] button, and then continue with step 7.
– If not changing the settings, continue with step 8.
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2083-5
Easy installation using the installer (Windows)3
– The XPS driver is also installed for Windows Vista/7/Server 2008/Server 2008 R2.
7Select the components to be installed, and then click the [OK] button.
– For details on fax drivers, refer to the User’s Guide [Fax Driver Operations].
8In the Confirm Installation Settings dialog box, click the [Install] button.
– If the Verify the publisher dialog box of Windows Security appears, click Install this driver 
software anyway.
– If the Windows Logo Testing or Digital Signature dialog box appears, click the [Continue] or [Yes] 
button.
9In the Finish Installing Drivers dialog box, click the [Finish] button.
This completes the fax driver installation.
In the Finish Installing Drivers dialog box, installation items can be confirmed and settings can be changed.
[Review]: Confirm the installation settings.
[Rename Printer]: Change the printer name.
[Property]: Specify the property settings of the printer. For details, refer to Initializing the printer driver on 
page 8-4.
[Print Setting]: Specify the functions of the printer driver. For details, refer to Parameter details on 
page 8-8.
[Print Test page]: Perform test print.
Downloaded From ManualsPrinter.com Manuals 
						

							4Manual installation using the 
Add Printer wizard
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2084-2
Manual installation using the Add Printer wizard4
4 Manual installation using the Add Printer wizard
4.1 Windows XP/Server 2003
4.1.1 Network connection (LPR/Port9100)
When using the LPR/Port9100 printing, specify the port during the printer driver installation process.
TCP/IP setting for this machine
Specify the IP address on TCP/IP Setting of this machine.
!
Detail 
For details on specifying the IP address of this machine, refer to the User’s Guide [Network 
Administrator].
RAW port number setting for this machine
To use Port9100 printing, enable the RAW port number (9100 at default), in the TCP/IP Setting screen of this 
machine.
!
Detail 
For details on specifying the RAW port number of this machine, refer to the User’s Guide [Network 
Administrator].
LPD setting for this machine
To use LPR printing, enable LPD print on LPD Setting of this machine.
!
Detail 
For details on the LPD settings of this machine, refer to the User’s Guide [Network Administrator].
Printer driver installation using the Add Printer Wizard
2
Reminder 
When installing on Windows XP or Server 2003, administrator permissions are required.
1Insert the Driver CD into the CD-ROM drive of the computer.
2Click the [Start] button, and then click Printers and Faxes.
– If Printers and Faxes does not appear in the Start menu, open Control Panel from the Start menu, 
select Printers and Other Hardware, and then click Printers and Faxes.
3For Windows XP, click Add a printer on the Printer Tasks menu.
For Windows Server 2003, double-click the Add Printer icon.
The Add Printer Wizard starts.
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2084-3
Manual installation using the Add Printer wizard4
4Click the [Next] button.
5Select Local printer attached to this computer, and then click the [Next] button.
– Clear the Automatically detect and install my Plug and Play printer check box.
The Select a Printer Port dialog box appears.
6Click Create a new port, and select Standard TCP/IP Port for Type of port:.
7Click the [Next] button.
The Add Standard TCP/IP Printer Port Wizard starts.
8Click the [Next] button.
9In the Printer Name or IP address box, enter the IP address for this machine, and then click the [Next] 
button.
– If the Additional Port Information Required dialog box appears, go to step 10.
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2084-4
Manual installation using the Add Printer wizard4
– If the Finish dialog box appears, go to step 13.
10Select Custom, and then click the [Settings] button.
11Change the settings according to the port, and then click the [OK] button.
– For an LPR connection, select LPR, and then enter Print in the Queue name box.
– For a Port9100 connection, select RAW, and then enter the RAW port number (9100 at default) in 
the Port Number box.
– The information entered here is case-sensitive.
12Click the [Next] button.
13Click the [Finish] button.
The Add Printer Wizard appears.
14Click the [Have Disk] button.
15Click the [Browse] button.
16Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open] 
button.
– Select the specified folder according to the printer driver to be used, the operating system, and the 
language.
Printer drivers that can be selected: 
PCL driver, PS driver, fax driver
– For details of the built-in CD-ROM construction, see Contents of CD-ROM on page 1-9.
– For details on fax drivers, refer to the User’s Guide [Fax Driver Operations].
17Click the [OK] button.
The Printers list appears.
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2084-5
Manual installation using the Add Printer wizard4
18Click the [Next] button.
19Follow the on-screen instructions.
– If the Windows Logo Testing or Digital Signature dialog box appears, click the [Continue] or [Yes] 
button.
– When using a network connection, perform a test print after the network settings have been 
specified.
20Click the [Finish] button.
21When installation is complete, make sure that the icon of the installed printer appears in the Printers 
and Faxes window.
22Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
4.1.2 Network connection (SMB)
When using the SMB printing, specify the port by specifying the printer during the printer driver installation 
process. Printers can be specified either by searching printers on the network, or by entering the printer 
name.
TCP/IP setting for this machine
Specify the IP address in the TCP/IP Setting screen of this machine.
!
Detail 
For details on specifying the IP address of this machine, refer to the User’s Guide [Network 
Administrator].
2
Note 
When using the IPv6 protocol, the Direct Hosting Setting on the machine must be enabled. For details, 
refer to the User’s Guide [Network Administrator].
SMB setting for this machine
In Print Setting in the SMB Setting screen of this machine, specify the NetBIOS name, print service name, 
and workgroup.
!
Detail 
For details on the SMB settings of this machine, refer to the User’s Guide [Network Administrator].
Downloaded From ManualsPrinter.com Manuals