Konica Minolta bizhub 751 User Manual

							IC-2081-9
Overview of printer functions1
1.4 Contents of CD-ROM
The following CD’s are contained in this product.
-Driver CD (Printer Driver CD)
-Application CD (PageScope Utilities)
-User’s Guide CD
Each CD contains printer drivers (for Windows and Macintosh), utilities, document data such as User’s Guide 
manuals and release notes, and screen fonts.
2
Note 
In User’s Guide, locations of folders or files may not contain the root directory.
Be sure to use files contained in the EN (English) folder.
Windows:
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2081-10
Overview of printer functions1
Macintosh:
Downloaded From ManualsPrinter.com Manuals 
						

							2Precautions for installation
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2082-2
Precautions for installation2
2 Precautions for installation
2.1 Introduction
Keep in mind the following information before install the printer driver.
The procedure for installing the printer driver differs depending on how this machine is connected to the 
computer, what operating system is installed on the computer, and what printer driver is to be installed.
To determine the printer driver to be installed and connection method, check the operating system on the 
computer and connection environment.
Select the installation method according to the printer driver and connection method.
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2082-3
Precautions for installation2
2.2 Printer drivers applicable to operating systems
In order to use this printing system, the printer driver must be installed.
The following lists the printer drivers included on the CD and the supported computer operating systems. 
Select the required printer driver.
Printer driverPage description 
languageSupported operating systems
Konica Minolta 
PCL Driver (PCL 
driver)PCL XL (PCL 6)32bit editions
Windows NT Workstation 4.0/Server 4.0 (Service Pack 6 or later)
Windows 2000 Professional/Server
(Service Pack 3 or later)
Windows XP Home/Professional
(Service Pack 2 or later)
Windows Server 2003 Standard
Windows Vista (All versions)
Windows Server 2008 (All versions)
Windows 7 (All versions)
64bit editions
Windows XP Professional
(Service Pack 2 or later)
Windows Server 2003
Windows Vista (All versions)
Windows Server 2008 (All versions)
Windows Server 2008 R2 (All versions)
Windows 7 (All versions)
Konica Minolta 
PostScript Driver 
(PS driver)PostScript3 Emu-
lation32bit editions
Windows 2000 Professional/Server
(Service Pack 3 or later)
Windows XP Home/Professional
(Service Pack 2 or later)
Windows Server 2003 Standard
Windows Vista (All versions)
Windows Server 2008 (All versions)
Windows 7 (All versions)
64bit editions
Windows XP Professional
(Service Pack 2 or later)
Windows Server 2003
Windows Vista (All versions)
Windows Server 2008 (All versions)
Windows Server 2008 R2 (All versions)
Windows 7 (All versions)
PostScript PPD 
driver (PS-PPD)Mac OS 9.2 or later
Mac OS X 10.2, Mac OS X 10.3, Mac OS X 10.4, Mac OS X 10.5, or Mac 
OS X 10.6
Konica Minolta 
XPS Driver (XPS 
driver)XPS32bit editions
Windows Vista (All versions)
Windows Server 2008 (All versions)
Windows 7 (All versions)
64bit editions
Windows Vista (All versions)
Windows Server 2008 (All versions)
Windows Server 2008 R2 (All versions)
Windows 7 (All versions)
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2082-4
Precautions for installation2
2
Note 
Select the page description language according to the application used for printing.
For details on fax drivers, refer to the User’s Guide [Fax Driver Operations].
Fax driver32bit editions
Windows NT Workstation 4.0/Server 4.0 (Service Pack 6 or later)
Windows 2000 Professional/Server
(Service Pack 3 or later)
Windows XP Home/Professional
(Service Pack 2 or later)
Windows Server 2003 Standard
Windows Vista (All versions)
Windows Server 2008 (All versions)
Windows 7 (All versions)
64bit editions
Windows XP Professional
(Service Pack 2 or later)
Windows Server 2003
Windows Vista (All versions)
Windows Server 2008 (All versions)
Windows Server 2008 R2 (All versions)
Windows 7 (All versions)
Printer driverPage description 
languageSupported operating systems
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2082-5
Precautions for installation2
2.3 Connection methods selectable in each operating system
The connection method for this machine differs depending on the operating system of the computer. The 
printer driver installation method also differs depending on the connection method.
This machine can be connected via a network or a USB interface. In network connection, the printer driver 
installation method differs depending on the protocol to be used.
Network connection (Ethernet):
This machine is connected as a network printer.
This printing system supports 10Base-T, 100Base-TX, and 1000Base-T standards. In addition, the Ethernet 
interface supports the TCP/IP (LDP/LPR, IPP, SMB), Web Service, IPX/SPX (NetWare), and AppleTalk 
(EtherTalk) protocols.
The applicable protocols differ depending on the operating system of the computer.
USB interface:
This machine is connected as a local printer. The USB interface can be connected to a computer Windows-
compatible computer.
2.3.1 Windows 2000/XP/Server 2003
2
Note 
Before using this machine in a network environment, the network settings must be specified for this 
machine. For details, refer to the User’s Guide [Network Administrator].
To install the printer driver under Windows 2000, XP, or Server 2003, log on using a user name that is 
authorized by the administrator.
This manual describes the setup method of USB connection only using the Plug and Play.
When a connection is made with the USB port, the local interface kit is required.
Setup methodConnection methodRefer to
Connection 
method that can 
be set up with an 
installerPort9100 A network connection using the 
PORT9100 print service. It uses a TCP/IP 
protocol and the RAW printing port.Easy installation using the in-
staller (Windows) on page 3-2
* Select the connection method in 
the course of installation. Select 
Normal Printing for Port 9100 or 
USB connection, Internet Printing 
for IPP connection, or Secure Print-
ing for IPPS connection. IPP/IPPS A network connection using the IPP (In-
ternet Printing Protocol) print service. 
Printing via the Internet is possible with 
the HTTP (HyperText Transfer Protocol) 
of the TCP/IP protocol. IPPS is an IPP for 
SSL encrypted communication.
USB A connection using a USB port.
Connection 
method that can 
be set up with 
the Add Printer 
WizardLPR A network connection using the LPR 
(Line Printer Remote) print service. It 
uses a TCP/IP protocol and the LPR 
printing port.Manual installation using the Add 
Printer wizard on page 4-2
Port9100 A network connection using the 
PORT9100 print service. It uses a TCP/IP 
protocol and the RAW printing port.
SMB A network connection using SMB (Server 
Message Block) for sharing files or print-
ers in Windows. It supports the TCP/IP 
protocol.
IPP/IPPS A network connection using the IPP (In-
ternet Printing Protocol) print service. 
Printing via the Internet is possible with 
the HTTP (HyperText Transfer Protocol) 
of the TCP/IP protocol. IPPS is an IPP for 
SSL encrypted communication.
USB A connection using a USB port.
Connection 
method that can 
be set up with 
plug-and-playUSB A connection using a USB port. For Windows XP/Server 2003: Lo-
cal connection on page 4-9
For Windows 2000: Local connec-
tion on page 4-30
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2082-6
Precautions for installation2
2.3.2 Windows Vista/Server 2008/7
2
Note 
Before using this machine in a network environment, the network settings must be specified for this 
machine. For details, refer to the User’s Guide [Network Administrator].
To install the printer driver under Windows Vista/Server 2008/7, log on as the Administrator.
Either of the installer or Add Printer Wizard can be used to install the PCL driver and PS driver.
When using Windows Vista/Server 2008/7, the IPPS connection can not be setup using the installer. 
For using IPPS connection, setup the connection using the Add Printer Wizard. For details, refer to 
Network connection (IPP or IPPS) on page 4-17.
Setup methodConnection methodRefer to
Connection 
method that can 
be set up with an 
installerPort9100 A network connection using the 
PORT9100 print service. It uses a TCP/IP 
protocol and the RAW printing port.Easy installation using the in-
staller (Windows) on page 3-2
* Select the connection method in 
the course of installation. Select 
Normal Printing for Port 9100 or 
USB connection, or Internet Print-
ing for IPP connection. IPP A network connection using the IPP (In-
ternet Printing Protocol) print service. 
Printing via the Internet is possible with 
the HTTP (HyperText Transfer Protocol) 
of the TCP/IP protocol.
USB A connection using a USB port.
Connection 
method that can 
be set up with 
the Add Printer 
WizardLPR A network connection using the LPR 
(Line Printer Remote) print service. It 
uses a TCP/IP protocol and the LPR 
printing port.Manual installation using the Add 
Printer wizard on page 4-2
Port9100 A network connection using the 
PORT9100 print service. It uses a TCP/IP 
protocol and the RAW printing port.
SMB A network connection using SMB (Server 
Message Block) for sharing files or print-
ers in Windows. It supports the TCP/IP 
protocol.
IPP/IPPS A network connection using the IPP (In-
ternet Printing Protocol) print service. 
Printing via the Internet is possible with 
the HTTP (HyperText Transfer Protocol) 
of the TCP/IP protocol. IPPS is an IPP for 
SSL encrypted communication.
Web Serv-
ice printA connection supports WSD (Web Serv-
ice on Devices) of Windows Vista/Server 
2008/7, detects the printer on the net-
work automatically and connects.
USB A connection using a USB port.
Connection 
method that can 
be set up with 
plug-and-playUSB A connection using a USB port. For Windows Vista/Server 2008/7: 
Local connection on page 4-22
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2082-7
Precautions for installation2
2.3.3 Windows NT 4.0
2
Note 
Before using this machine in a network environment, the network settings must be specified for this 
machine. For details, refer to the User’s Guide [Network Administrator].
To install the printer driver under Windows NT 4.0, log on using a user name that is authorized by the 
administrator.
2.3.4 Mac OS 9.2
!
Detail 
Before using this machine in a network environment, the network settings must be specified for this 
machine. For details, refer to the User’s Guide [Network Administrator].
2.3.5 Mac OS 10.2, 10.3, 10.4, 10.5, or 10.6
!
Detail 
A network connection using AppleTalk is available for up to Mac OS X 10.2/10.3/10.4/10.5.
Before using this machine in a network environment, the network settings must be specified for this 
machine. For details, refer to the User’s Guide [Network Administrator].
2.3.6 NetWare
Setup methodConnection methodRefer to
Connection 
method that can 
be set up with 
the Add Printer 
WizardLPR A network connection using the LPR print 
service.Manual installation using the Add 
Printer wizard on page 4-2
Setup methodConnection methodRefer to
A method to 
specify the Print-
er Description 
File (PPD file)AppleTalk A network connection using AppleTalk.Installation on Macintosh com-
puters on page 5-2
* Specify the connection method 
when selecting the printer. LPR  (LPD) A network connection using the LPR print 
service.
Setup methodConnection methodRefer to
Connection 
method that can 
be set up with an 
installerBonjour A network connection using Bonjour and 
Rendezvous.Installation on Macintosh com-
puters on page 5-2
* Specify the connection method 
when selecting the printer. AppleTalk A network connection using AppleTalk.
LPR A network connection using the LPR print 
service.
IPP A network connection using the IPP print 
service.
NetWare versionProtocol usedConnection method
NetWare 4.x IPX Bindery Pserver
Nprinter/Rprinter
NetWare 5.x IPX NDS Pserver
Nprinter/Rprinter
TCP/IP NDPS
NetWare 6.x IPX NDS Pserver
TCP/IP NDPS
Downloaded From ManualsPrinter.com Manuals 
						

							IC-2082-8
Precautions for installation2
2
Note 
For details on the NetWare functions, refer to the NetWare operation manual of the NetWare.
Before using this machine in a NetWare environment, the network settings must be specified for this 
machine. For details, refer to the User’s Guide [Network Administrator].
Downloaded From ManualsPrinter.com Manuals