Konica Minolta bizhub 211 User Manual

When a message appears8
bizhub 163/211 8-13
4Pull out the paper drawer.
5Remove all paper from the drawer, 
and then load the drawer with paper 
again.
– Load the paper so that it fits 
under the tabs and so that the top 
of the stack is not higher than the 
, mark.
6Slide the paper guides to fit the size 
of paper being loaded.
– Be sure that the paper guides are 
slid up against the edges of the 
loaded paper.
Downloaded From ManualsPrinter.com Manuals 

8When a message appears
8-14 bizhub 163/211
7Close the paper drawer.
Downloaded From ManualsPrinter.com Manuals 

When a message appears8
bizhub 163/211 8-15Clearing a paper misfeed in the multi bypass tray (optional)
1Remove all paper from the multi 
bypass tray.
2Open the right-side door of the 
machine.
– Decreased copy quality may 
result if the surface of the image 
transfer roller is touched.
Be careful not to touch the 
surface of the image transfer 
roller.
Image transfer roller
Downloaded From ManualsPrinter.com Manuals 

8When a message appears
8-16 bizhub 163/211
3Slowly pull out the paper.
4Close the right-side door of the 
machine.
5Reload paper into the multi bypass 
tray.
Downloaded From ManualsPrinter.com Manuals 

When a message appears8
bizhub 163/211 8-17Clearing a paper misfeed in the duplex unit (option for bizhub 211 only)
The optional duplex unit must be installed.
1Open the duplex unit cover.
2Carefully pull out any misfed paper.
3Close the duplex unit cover.
Downloaded From ManualsPrinter.com Manuals 

8When a message appears
8-18 bizhub 163/211
8.3 When the message ORIGINAL DOC. JAM appears
If the document is misfed, the following message appears and scanning of 
the document stops.
Follow the appropriate procedure described below to clear the misfed paper.
______CAUTION_______
OPEN DOC.FEED COVER
 ORIGINAL DOC. JAM
Downloaded From ManualsPrinter.com Manuals 

When a message appears8
bizhub 163/211 8-19Clearing a paper misfeed in the document feeder
1Open the misfeed-clearing cover.
2Remove all document pages from 
the document feed tray.
3Lift open the document feeder.
Downloaded From ManualsPrinter.com Manuals 

8When a message appears
8-20 bizhub 163/211
4While turning the knob on the 
document feeder in the direction of 
the arrow, slowly pull out the 
document.
5Close the document feeder and the 
misfeed-clearing cover.
6Reload the tray with the document 
pages removed in step 2.
– If the message RETURN 
ORIGINAL to ADF and PRESS 
START KEY appears on the 
display, return the document 
pages that caused the misfeed to 
their original positions.
Downloaded From ManualsPrinter.com Manuals 

When a message appears8
bizhub 163/211 8-21
8.4 Main error messages and their remedies
MessageCauseRemedy
PAPER JAM
OPEN 1st SIDE COVERA paper misfeed occurred in 
the machine.Open the cover at the indicated 
location, and then remove the 
misfed paper. Refer to When 
the message PAPER JAM 
appears on page 8-6.
All misfed paper was not re-
moved from inside of the ma-
chine.Open the cover at the indicated 
location, and then remove all 
misfed paper. Refer to When 
the message PAPER JAM 
appears on page...

8When a message appears
8-22 bizhub 163/211
Paper Empty (when specifying copy settings)
The selected paper drawer 
contains no paper.
# indicates the paper drawer, 
and XXX indicates the paper 
size.Either load paper of the speci-
fied size into the specified pa-
per drawer, or press the [Paper] 
key and select a different paper 
size.
NO SUITABLE PAPER
LOAD PAPER (#XXX)• The paper size setting for the 
selected paper drawer was 
changed while copying.
• While copying with the 
Mixed Original setting and...