JVC Ux H100 Manual

6
English
Getting Started
Unpacking
After unpacking, check to be sure that you have all the
following items.
The number in parentheses indicates the quantity of each
piece supplied.
•AM loop antenna (1)
•Remote control (1)
•Batteries (2)
•AC plug adaptor (1)
If any item is missing, consult your dealer immediately.
Putting the Batteries into the Remote Control
Insert the batteries—R6(SUM-3)/AA(15F)—into the remote
control by matching the polarity (+ and –) on the batteries
with the + and – marking on the...

7
English
To connect AM and FM antennas
1Connect the supplied AM loop antenna to the
AM LOOP terminal.
Place the antenna away from the unit and adjust its
position for the best reception.
2Adjust the position for the FM antenna for
the best reception.
For better reception of both FM and AM
•Make sure the antenna conductors do not touch any other
terminals or connecting cords.
•Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
Connecting Other Equipment
To...

8
English
Basic and Common Operations
Setting the Clock
Before operating the unit any further, first set the unit’s clock.
When you plug in the power cord, “0:00” starts flashing on
the display.
You can set the clock when the unit is either turned on or in
standby mode.
On the remote control ONLY:
1Press CLOCK/TIMER.
The hour indication starts flashing.
2Press 4 or ¢ to adjust the
hour, then press SET.
•When you press and hold 4 or
¢, the hour indication changes
continuously.
The minute indication starts...

9
English
Selecting the Source
To select the source, press CD 6, TAPE, FM/AM, or
AUX.
•When you select CD as the source, playback starts
automatically.
To operate the tuner (FM or AM), see pages 10 and 11.
To operate the CD player, see pages 12 to 14.
To operate the tape deck, see page 15.
To record on a tape, see pages 17 and 18.
To use an external equipment, see page 16.
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between “VOL...

10
English
Tuning in to a Station
1Press FM/AM to select either “FM”
or “AM.”
The unit automatically turns on and tunes in to
the previously received station—either FM or AM.
•Each time you press the button, the band alternates
between FM and AM.
2Press and hold ¢ or 4 (or
UP ¢ or DOWN 4 on the
unit) for more than 1 second.
•¢ (UP ¢): Increases the frequencies.
•4 (DOWN 4): Decreases the frequencies.
The unit starts searching for stations and stops when a
station of sufficient signal strength is tuned...

11
English
Tuning in to a Preset Station
On the remote control ONLY:
1Press FM/AM to select either “FM”
or “AM.”
The unit automatically turns on and tunes in to
the previously received station—either FM or AM.
•Each time you press the button, the band alternates
between FM and AM.
2Press PRESET UP or
PRESET DOWN repeatedly to
select a preset number.
To tune in to a preset station directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you to select the preset...

12
English
2Place a disc correctly
with its label side up,
then press down on the
portions around the
disc’s center hole until
you hear a click.
3Close the disc cover gently.
4Press CD 6.
The unit automatically turns on and the source
changes to the CD player.
After loading the disc, the first track of the disc starts
playing.
•The disc automatically stops when the last track has
finished playing.
To stop playing, press 7.
The total track number and total playing time
appear on the display.
•Total...

13
English
Basic Disc Operations
While playing a disc, you can do the following operations.
To stop playing for a moment
During play, press CD 3/8.
While pausing, the elapsed playing time flashes on
the display.
To resume playing, press CD 3/8 again.
To go to another track
Before or during play, press ¢ or 4
(or UP ¢ or DOWN 4 on the unit)
repeatedly.
•¢  (UP ¢): Skips to the beginning of the next or
succeeding tracks.
•4  (DOWN 4): Goes back to the beginning of the
current or previous tracks.
To go to...

14
English
Playing at Random—Random Play
You can play the tracks at random.
On the remote control ONLY:
Press PLAY MODE during playing.
The RANDOM indicator lights up on the display.
To exit from Random Play, press PLAY MODE
again.
The RANDOM indicator goes off.
•It is not possible to activate the Random Play function
during Program Play.
Displaying the Remaining Time during
Playback
You can display the remaining time of the current track/disc
and the elapsed time of the current track/disc during...

15
English
4Press TAPE.
The unit automatically turns on and the
source changes to the tape deck.
•You can select to the tape by pressing
TAPE on the remote control.
5Press # (play).
The tape starts playing.
•When the end of the tape is reached,
playing stops.
To stop playing, press &/).
To stop playing for a moment, press *.
To resume playing, press * again.
To fast forward or rewind the tape, press ⁄
or !.
•The fast forwarding or rewinding stops at the
end of the tape.
To remove the cassette, press &/)...