JVC Th A75 Instructions

17
Adjusting the volume
You can adjust the volume level within the range of “0”
(minimum) to “70” (maximum).
Press VOLUME +/–.
• Press + to increase the volume.
• Press – to decrease the volume.
The volume level appears on the display.
 CAUTION:
Always set the volume to the minimum before starting any
source.
If the volume is set at its high level, the sudden blast of sound
energy can permanently damage your hearing and/or ruin your
speakers.
7Listening with headphones
Connect a pair of headphones to the...

18
Turning off the power with the
sleep timer
Using the sleep timer, you can fall asleep while listening to
music.
From the remote control ONLY:
Press SLEEP.
Each time you press the button, the shut-off time changes as
follows:
0min (cancelled) ] 10min (minutes) ] 20min ]
30min ] 60min ] 90min ] 120min ] 150min ]
(back to the beginning)
Ex.: When “150min” is selected.
To check the remaining time until the shut-off time
Press SLEEP once.
The remaining time until the shut-off time appears on the
display...

19
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
Storing basic adjustments—
auto memory
This system stores sound settings for each source:
•When you turn off the power, and
•When you change the source
The following can be stored:
•The adjustment for the front speakers—balance, bass, and
treble (see pages 26 and 54)
•Low frequency effect attenuator (see pages 26 and 54)
•Subwoofer audio position (see page 26)
•Speaker and subwoofer output level (see pages 17, 32
and 55)*
•Bass boost setting (see...

20
Basic DVD player operations
For more details about DVD player operations, see pages 33
to 45.
For MP3 playback, see pages 46 and 47. For JPEG disc
playback, see pages 48 and 49.
•Before using the remote control, press DVD to change
the remote control operation mode.
•Turn on your TV and select the correct input mode on the
TV before turning on the system.
1Press 0 on the center unit.
The system turns on and the disc tray comes out.
The STANDBY lamp goes off.
•To change the subtitle or audio language,...

21
L
S.WFR
LS
RS CR
LFE
DIGITAL
SURROUND
LINEAR PCML
S.WFRR
To select a particular title, chapter or track using number
buttons
Title on DVD :While stopped
Chapter on DVD :During playback
Track on VCD/SVCD :During playback with the PBC function
deactivated or while stopped
Track on Audio CD :During playback or while stopped
From the remote control ONLY: Press the number buttons.
•To select 3, press 3.
•To select 14, press +10 then 4.
•To select 24, press +10, +10, then 4.
•To select 40, press +10, +10,...

22
From the remote control ONLY:
1Press FM/AM repeatedly to select the band.
Each time you press the button, the band alternates
between FM and AM.
The selected band appears on the display, then the last
received station appears.
Ex.: When AM is selected
Tuner operations
You can browse through all the stations or use the preset
function to go immediately to a particular station.
• Before using the remote control, press FM/AM to
change the remote control operation mode.
Setting the AM tuner interval...

23
2Press MEMORY.
The channel number position starts flashing on the
display for about 5 seconds.
3Press the number buttons (1–10, +10) to
select a channel number while the channel
number position is flashing.
The channel number and the CH indicator start flashing.
Ex.:
• For channel number 3, press 3.
• For channel number 14, press +10 then 4.
(For FM stations only)
• For channel number 24, press +10, +10, then 4.
• For channel number 30, press +10, +10, then 10.
4Press MEMORY again while the selected...

24
Some of the following settings are required after connecting
and positioning your speakers, while others will make
operations easier.
• You can also set following speakers setting using the choice
menu except “EX/ES,” “PHASE” and “M.OUT” (see pages 55
and 56).
1Press SETTING/ADJUST once.
“SETTING” appears on the display.
•  Each time you press SETTING/ADJUST, the function for
the button changes as follow.
SETTING\ADJUST\current source\
(back to the beginning)
2Press Cursor ∞/5 repeatedly to select...

25
NOTES:
•If you have selected “NO” for the surround back speaker (see page
24), you cannot select this setting. 6.1-channel and 5.1-channel
software is played back in the same way as  “OFF” is selected for
above setting.
•When the sound is not output from the surround back speaker even
though playing back Dolby Digital EX software (bearing the mark
) setting “EX/ES” to “AU TO,” select “ON” instead of “AUTO.”
Setting the speaker distance
—FRNT D (front speaker distance),
CNTR D (center speaker...

26
Audio adjustments
You can adjust sound to your preference according your
listening conditions or sources.
• You can also adjust sound using the choice menu except
“AUDIO POS” and “B.BOOST” (see page 54).
Operating procedure
Setting the dynamic range
—MIDNIGHT
You can reinforce the bass sound if bass sounds are not
sufficient.
Select one of the following settings:
1:Select when you want to reduce the dynamic
range a little.
2:Select when you want to apply the compression
effect fully (useful at...