JVC Projector Dla Rs60u3d Instructions Manual

21
ENGLISH
Installing the Projector and Screen
Set Angle
Shift 
About installation (Continued)
While installing, please place this unit and the screen perpendicular to each other. Failing 
to do so may  increase trapezoidal distortion.  (Reference page: 36, 52)
The angle range which can be set for this unit is ±30°.
■ 
Left/Right position 
　 *  0% up/down position (center)
■  
Up/Down position
　 * 
0% left/right position (center)
Lens shift correlation chart:
● Malfunctions may occur if the angle is not...

22
Preparation
2
About installation (Continued)
Fixation of the projector
Measures to prevent the unit from toppling or dropping should be taken f\
or safety reasons and 
accident prevention during emergencies including earthquakes.
When mounting this unit on a pedestal or ceiling, remove the 4 feet on t\
he bottom surface and 
use all the 4 screw holes (M5 screws) to mount.
Ceiling
■ Bottom Surface
Air inlets 4 locations
Precautions for Mounting
● Special expertise and techniques are required for...

23
ENGLISH
About installation (Continued)
Determine the distance from the lens to the screen to achieve your desir\
ed screen size. 
This unit uses a 2.0x power zoom lens for projection. 
Screen Size and Projection Distance
■ Relationship Between Projection Screen Size and Projection Distance
P
ro je ctio n S cre en S iz e
(Height, Width) 
Aspect Ratio 16:9 A
ppro xim ate  P ro je ctio n 
Distance
W(Wide) to  T(Tele)
140"
(Approx.1.7, 3.1m) Approx.4.23 m 
to
  
Approx.8.60m
150"
(Approx.1.9,...

24
Preparation
2
About the connection
T ypes of possible input signals (PC compatible)
● HDMI
No.DesignationResolution fh
[kHz] fv
[Hz] dot CLK
[MHz] T
otal No. 
of dots [dot] T
otal No. 
of lines [line] No. of 
ef fective 
dots
[dot] No. of 
ef fective 
lines [line]
1 VGA 60
640 X 480 31.50060.000 25.200 800525 640 480
2 VGA 59.94
640 X 480 31.46959.940 25.175 800525 640 480
3 SVGA 60
800 X 600 37.87960.317 40.000 1,056 628800 600
4 XGA 60
1024 X 768  48.36360.004 65.000 1,344 8061,024 768
5 WXGA  60...

25
ENGLISH
About the connection (Continued)
● Do not turn on the power until connection is complete. 
● The connection procedures dif fer according to the device used. For details, refer to the instruction 
manual of the device to be connected.
●  This device is used for image projection. Connect to an audio output device such as amplifier and 
speaker for audio output from the connected device.
● The images may not be displayed depending on the devices and cables to be connected.
For HDMI cable (sold...

26
Preparation
2
About the connection (Continued)
■  Connecting via HDMI Cable
■ Connecting via HDMI-DVI Conversion Cable
1        HDMI         2
RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUT
OK
1        HDMI         2
RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUT
OK
This unit
This unit BD/DVD recorder
HDMI cable (sold separately)
HDMI output terminal
Notebook PC
● 
If noise is produced, take PCs (Notebook PC) away from...

27
ENGLISH
About the connection (Continued)
1        HDMI         2RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUTOK
CBD/DVD player
Component video output  terminals
Y (green)
C
R/PR (red)
C
B/PB (blue)
●  Set “COMP.” in the setting menu to “Y Pb/Cb Pr/Cr”. 
(Reference page: 52)
This unit
To component video input terminals
Component video cable  (sold separately)
■  
Connecting via RGB V
ideo Cable
● Set  “
COMP .”
 in the setting menu to  “
RGB ”
. (Reference page:...

28
Preparation
2
RS50RS5 0RS60■ Connecting via PC Cable 
About the connection (Continued)
1        HDMI         2
RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUT
OK
This unit
● 
For information on supported input signals, please refer to 
“Specifications
”.(Reference page: 73)
PC cable
(sold separately
)
To PC input terminal
VGA output terminal
Notebook PC
■  
Connected by a 3D SYNCHRO terminal
1        HDMI         2
RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC...

29
ENGLISH
About the connection (Continued)
■ Connecting via T
rigger Cable
1        HDMI         2
RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUTOK
This unit
     
●  Do not supply the power to the other devices.
● 
Do not connect audio terminals of the other devices such as headphones etc. Otherwise, this may 
cause a malfunction of the other devices or injury. 
● Using beyond the rated value will cause malfunction.
● Exercise adequate caution to prevent short...

30
Preparation
2
About the connection (Continued)
■  Connected by LAN terminal  
1        HDMI         2
RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUT
OK
This unit
● 
The network is used to control the unit. It is not used for transmission of the video signal.
● Please contact your network administrator for questions concerning the network connection. Network
HUB
Server
1        HDMI         2 RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL...