JVC Projector Dla Rs60u3d Instructions Manual

11
ENGLISH
For detail information about ISF, please refer web site 
http://www .imagingscience.com / 
Getting Started   

12
Getting started
Contents 
Getting started
Safety Precautions ...........................2
THX Certification            .................. 10
Contents   ......................................... 12
Accessories/Optional  
Accessories  .................................... 13
Check the Accessories  .............................. 13
Optional Accessories  ................................. 13
Controls and features  ....................14
Main body - Front  ...................................... 14
Main body...

13
ENGLISH
Accessories/Optional Accessories
Remote Control ........................................................................\
.. 1 piece
AAA size Batteries (for operation confirm) ..................................2 pieces
Power Cord For the US market (2 m)  .........................................1 piece
Power Cord For the EU market (2 m)  .........................................1 piece
Power Cord For the UK market (2 m)  .........................................1 piece
● Instruction manual,...

14
Getting started
⑦ Feet
Controls and features
①  Lens 
This is a projection lens. Please do not look 
inside during projection.
②  Remote receiver (front) 
Please aim the remote control at this area when 
using it. 
* There is also a remote receiver at the rear .
③  Indicator 
  Please see  “
About the indicator display ”
 for 
details. (Reference page: 16)
④   Exhaust V ent 
 
Warm air flows out in order to cool the interior of 
the set. Please do not bloc
k the vents.
⑤ Inlets⑥ Manual   button for...

15
ENGLISH
Main body - Rear
Controls and features (continued)
⑧  Input terminal 
There is also a terminal other than the input 
terminal for video images, such as those used 
for controlling or optional equipment.  This 
illustration is 
RS50RS5 0RS60. Please see  “
About input 
terminals ”
 for detailed information RS5 0RS50RS40 about 
terminals. (Reference page: 18)
⑨   Lamp Cover 
When replacing the light source lamp, remove 
this cover . (Reference page: 60)
⑩  Operation panel 
See the following...

16
Getting started
Controls and features (continued)
Warnings and indications used during normal operation mode of this unit are displayed with the indicators 
for [ST AND BY  / ON], [LAMP], [W ARNING] at the front of this unit.
Meaning of the lighting figures:
Operation mode display
Displays the color and lighting/flashing of the [ST AND BY / ON] indicator .
Criterion indication of the lamp replacement
Displays lighting/flashing of the [LAMP] indicator . Moreover, the [STAND BY / ON] indicator , which...

17
ENGLISH
Warning display
Y ou are informed of the contents of warning notices by the (repeated) displays of the [W ARNING] and 
[LAMP] indicators. Moreover , the [STAND BY / ON] indicator , which shows the operating mode of the unit, 
is displayed simultaneously as described above.
Upon activation of the warning mode, the projection is interrupted at the same time for about 60 seconds 
and the cooling fan is turne
d on. Please disconnect the power plug from the electric socket after the 
cooling fan...

18
Getting started
Controls and features (continued)
Main body - Input terminal
① HDMI 1 ② HDMI 2 ③ LAN
⑤ COMPONENT
⑧ TRIGGER ⑨ REMOTE
⑥ 3D SYNCHRO ⑦ PC
④ RS-232C
①   HDMI 1 T erminal 
You can connect a device equipped with HDMI 
output, etc.  It is fitted to the M3 lock hole. 
Screw hole depth 3mm. (Reference page: 26)
②   HDMI 2 T erminal 
You can connect a device equipped with HDMI 
output, etc.  It is fitted to the M3 lock hole. 
Screw hole depth 3mm. (Reference page: 26)
③   LAN terminal  “
RJ-45 ”...

19
ENGLISH
Controls and features (continued)
■ Remote Control
How to insert batteries into the remote control
● 
If the remote control has to be brought closer to the projector to operate, it means that the batteries are 
wearing out.  
When this happens, replace the batteries. Insert the batteries according to the 
 marks.● Be sure to insert the  end first.● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the 
batteries again and operate the remote...

20
Preparation
2
 
About installation
Important points concerning the installation
This unit is a precision device.  Therefore, please refrain 
from installation or use in the following locations. 
Otherwise, it may cause fire or malfunction.
•   Dust, wet and humid locations.
•   Sooty or cigarette smoke filled locations.
•   On top of a carpet or bedding, or other soft surfaces.
•   Locations with high temperatures - as located in direct 
sunlight
.
•   Locations with high or low temperatures....