JVC Projector DLA-RS400 User Manual

Setting the Color Profile
By setting the “Color Profile” (color space information) according to the “Picture Mode”, you can fine-tune the image
quality according to the movie you are viewing. 1
Configure “Picture Mode” (P. 30), then select “Picture Adjust”"“Color Profile” in the
menu 0 The  selectable “Color Profile” settings vary according to the “Picture Mode” and also whether the signal is 2D
or 3D. List of “Color Profile” for “Picture Mode”
 9Picture Mode 2D Signal Input 3D Signal Input...

List of “Color Profile” for “Picture Mode”
 7 8Picture Mode 2D Signal Input 3D Signal Input
DescriptionFilm
Film 1 —
Color space that is close to the characteristics of Eastman Kodak Company
movie films.
Film 2 —
Color space that is close to the characteristics of FUJIFILM Corporation movie
films.
Film 3 —
Color space suitable for digitally remastered piece of art based on a Technicolor
film.
— 3D Film*1 Color space suitable for 3D movies recorded in film.Cinema Cinema 1 3D Cinema Original JVC...

Adjusting to the Preferred Color (Color Management)
Based on the setting of the selected “Color Profile”, you can adjust each of the following colors according to your
preference: Red, Yellow, Green, Cyan, Blue, and Magenta. 1
Press the [ADVANCED MENU] button to display the “Color Profile” menu 2
Set “Color Management” to “On”, and press the [OK]
button 0 You  can also perform setting from “Picture Adjust”"“Color Profile” "“Color
Management” in the menu. 3
Adjust to the preferred color.
A Select...

Adjusting Movies for Increased
Expressiveness (Multiple Pixel Control)
The new image-processing algorithm developed by JVC
helps to create a natural impression that is sharper at
areas in focus, and softer at areas that are not in focus,
enabling you to enjoy highly expressive 4K images with
a greater sense of depth. 1
Press the [MPC] button to display the
adjustment menu 0 You can also perform setting from “Picture
Adjust”"“MPC Level” in the menu.
. 2
Make adjustments according to your
preference...

About the analysis screen
Pressing the [P.ANALYZER] button on the remote control displays the analysis screen. The operation varies with the
state of the OSD.
*
The analysis screen is not displayed during 4K 50/60p signal input. 1
Press the [P.ANALYZER] button
The frequency components of the input image are displayed.
. 0
The frequency components are distinguished using different colors.
0 When setting the “Original Resolution” manually, select “4K” if high-frequency components constitute the majority,...

Fine-tuning the Image Quality
Adjusting the Output Value of the Projected Image (Gamma)
You can adjust the output value of the projected image with respect to the video signal input.
Example of gamma adjustment
The overall image appear brighter with respect to the original image, making the dark areas more visible.
.Increases the contrast with respect to the original image, creating a greater sense of depth.
. 1
Press the [GAMMA] button
0 Pressing the [GAMMA] button each time switches the setting in...

Gamma Settings for Different “Color Profile”
 7 8Color Profile
Selectable Settings DescriptionFilm 1
Film 1 Image is close to the characteristics of Eastman Kodak
Company movie films.
Film 2 Places more emphasis on the gradation compared to the
“Film 1” setting.
Custom 1 to Custom 3 Fine-tunes the gamma setting according to the user’s
preference.Film 2
Film 1 Places more emphasis on the contrast compared to the “Film
2” setting.
Film 2 Image is close to the characteristics of FUJIFILM Corporation
movie...

2
Adjust to the preferred setting Item
Description Setting
Color Selection Select “Color Selection”, and select the color to adjust White/Red/Green/Blue
Picture Tone Adjusts the overall brightness automatically for a well-balanced result without compromising the gradation of the image. -16 (darkens image for an
underexposed effect) to +16
(brightens 
image for an overexposed
effect)
Dark Level Adjusts the dark areas of the input image. (Each of White/Red/ Green/Blue can be adjusted.)
0 To do so, use the...

Procedures for adjusting the image when gamma is set to “D”
If 
the image appears dark when gamma is set to “D”, it is recommended to adjust the image according to the following
procedures.
A While checking the overall image, adjust the setting value of “Picture Tone” in the + direction.
B Focus on the bright area of the image and adjust the setting value of “Bright Level” in the + direction until the bright
area appears appropriate.
C Focus 

on the dark area of the image and adjust the setting value of...

Motion Enhance
Optimal image quality with reduced image blurring is made possible by enhancing the responsiveness of the liquid
crystal panel.
If the image outline is unnatural, set this item to “Off”. 1
Select “Picture Adjust”"“Blur Reduction”
"“Motion Enhance” from the menuSetting
Description
Off Does not perform correction.
Low Reduces image blurring.
High Further reduces image blurring than “Low”.0
If “Keystone” is set to a value other than “0”, the “Motion Enhance” is set to “Off” and grayed...