JVC Projector DLA-RS400 User Manual

Viewing Videos
MEMO
0 When you are using  9, be sure to remove the lens cover.
0 Connect the power cord, and ensure that the “STANDBY/ON” indicator
lights up in red. 1
Turn on the power
Remote control: press the  C [ON] button
Projector unit: press the  A [STANDBY/ON] button
0 The  “STANDBY/ON” indicator light switches from red to green (light
goes off after the unit starts up).
0 (7 8) The lens cover opens.
. 2
Choose the image to project
Remote control: press the [HDMI 1] or [HDMI 2] button
Projector...

3
Turn off the power
Remote control: press the B [STAND BY] button
Projector unit: press the A [STANDBY/ON] button 0 While the “Are you sure you want to turn off?” message is displayed, press the button again.
0 The lamp turns off, and the “STANDBY/ON” indicator switches from a green light to a red blinking light.
0 After the light goes off, the fan will run for about 100 seconds to cool down the lamp (Cool-down mode).
Do not disconnect the power cable while cooling is in progress.
0 After about 100...

Adjusting the Projector Screen
Adjusting the Lens According to the Projection Position
1
Press the [LENS CONTROL] button, and use the [
JKH I]
keys  to adjust Focus, Zoom (screen size), and Shift (screen
position)
. 0
Pressing 
 the [LENS CONTROL] or [OK] button each time switches the mode
in the following sequence: “Focus” " “Zoom”  " “Shift” " “Focus”...
0 Operation of the lens control feature is disabled when the lens lock is set to
“On”.
0 For more detailed information, please refer to...

Saving and Retrieving Adjustment Settings
The Focus, Zoom, and Shift settings can be saved or retrieved, so you can switch
easily to a different aspect ratio (screen size) according to the image.
0 In a state where no adjustment settings are saved (factory default), only “Lens
Memory Save” is displayed.
0 Operation  of the lens control feature is disabled when the lens lock is set to “On”. Saving an adjustment data
1
Adjust focus, zoom, or shift (P. 23) 2
Press the [MEMORY MENU] button to display “Lens...

Retrieving an adjustment data
1
Press the [MEMORY MENU] button to display “Lens Memory Select”
0 You can also retrieve an adjustment data by selecting “Installation” "“Lens Control”"“Lens Memory Select”
from the menu.
0 MEMORY1 and 2 can also be retrieved using the direct keys on the remote control.
.2
Select the adjustment data to retrieve, and press the [OK] button
0 The retrieved data is adjusted automatically.
0 If no adjustment data has been saved, the item will be grayed out and cannot be...

Setting Screen Correction
1
Set Screen Adjust
By selecting the optimal correction mode
according to the characteristics of the screen in
use, corrections can be performed to reproduce
natural images with balanced colors.
. 0
This  item is not available when “Color Profile” is
set to “Off”.
0 For information on the screen and the
corresponding 

correction mode, please visit our
website.
http://www3.jvckenwood.com/english/projector/screen/ MEMO
0 You can utilize the optional optical sensor and
dedicated...

Adjusting the Screen Size (Aspect)
The screen size of the projected image can be adjusted
optimally according to the original screen size (aspect)
that has been input. 1
Press the [MENU] button to display
the menu 2
Select “Input Signal”"“Aspect” from
the menu
. Setting
Description
4:3 Sets the screen size to 4:3. For HD signals, the two sides are
reduced. Displayed
only during
video signal
input.
16:9 Sets the screen size to 16:9.
For SD signals, the two sides
are expanded.
Zoom Enlarges the entire...

Viewing 3D Movies
By using the 3D GLASSES (PK-AG1, PK-AG2, or PK-AG3) and 3D SYNCHRO EMITTER (PK-EM1 or PK-EM2), both sold separately, you can enjoy 3D video images.
0 For 3D GLASSES and 3D SYNCHRO EMITTER that are compatible with this unit, please refer to  “Optional
Accessories”P. 9. Installing the 3D SYNCHRO EMITTER
1
Connect 3D SYNCHRO EMITTER to the [3D SYNCHRO] terminal on the main unit
Installation Example
. CAUTION
0 If PK-EM1 is used, adjust the position of the 3D SYNCHRO EMITTER such that the...

Viewing 3D Movies
1
Connect this unit to a 3D-compatible
HDMI device, and turn on the power
to play back the 3D video image 0 For  details on how to play back 3D video images,
please refer to the instruction manual of the
player or recorder in use.
0 When 
 3D signals are received, the video image
switches automatically to the 3D format.
0 This unit supports the following 3D formats.
- Frame packing
- Side-by-side
- Top-and-bottom
0 In 
 the default setting, “3D Format” is set to “Auto”
for automatic...

Selecting an Image Quality According to the
Video Type Setting the Picture Mode
You can adjust the image quality according to the type of video image you are viewing. 1
Press the [PICTURE MODE] button to select “Picture
Mode” 0 You can also perform setting from “Picture Adjust” "“Picture Mode” in the
menu. Item
Description
Film*1  7 8Reproduces faithfully the texture of movie films.
Cinema*1 Reproduces the image in vivid colors. Suitable for all
movies.
Animation*1 Suitable for animated works....