JVC Nx F3 Instructions

COMPACT COMPONENT SYSTEM
NX-F7
Consists of CA-NXF7, 
SP-NXF7F and SP-NXF7W
NX-F3
Consists of CA-NXF3, 
SP-NXF3F and SP-NXF3W
LVT1833-016A[A, UB]
INSTRUCTIONS
English
NX-F3_NX-F7[A]EN-frontcover.fm  Page  1  Thursday, May 1, 2008  4:07 PM
 

G-1
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
CAUTION — F button!
Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing 
the apparatus, ensure that the plug is easily accessible. 
The F button in any position does not disconnect the mains line.
• When the system is on standby, the STANDBY lamp lights red.
• When the system is turned on, the...

G-2
CAUTION — Proper Ventilation
To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows:
Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below.
Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on 
a stand with a height of 10 cm more. 
In addition, maintain the best possible air circulation.
Front view of the main unit and speakers (CA-NXF7 and SP-NXF7F)
Front view of the main...

1
Introduction
Thank you for purchasing a JVC product. 
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain 
the best possible performance from the unit.
Part description ............................. 3
Using the remote control .............. 4
Inserting the batteries into the remote 
control ........................................................... 4
Operating the system from the remote 
control...

Introduction
2
Convenient functions of disc/file 
playback ....................................... 29
Playing back a disc/file in the desired order 
(Program playback) .................................... 29
Playing back a disc/file in a random order 
(Random playback) .................................... 31
Playing back a disc/file repeatedly 
(Repeat playback) ...................................... 31
Selecting the audio language and subtitle 
language...

3
Introduction
The numbers refer to the pages in which the parts are explained. 
Front view
Refer to “Display window” shown below.Remote control sensor
*[K2] is printed on NX-F7.
[SURROUND] is printed on NX-F3 instead.
Rear view
Cooling fan
Display window
Part description
NX-F3_NX-F7[A]EN-02.fm  Page 3  Thursday, May 1, 2008  4:09 PM
 

Introduction
4
The numbers refer to the pages in which the parts 
are explained.
NOTE
*[K2] is printed on the remote control for NX-F7 
only.
 
Insert the batteries into the remote control by 
matching the polarity (+ and −) correctly.
• If the range or effectiveness of the remote con- trol decreases, replace both batteries.
Point the remote control directly at the 
front of the main unit.
• Do not block the remote control sensor on the 
main unit.
Inserting the batteries into 
the remote control...

5
PreparationSetting up the AM loop antenna
NOTE
• Keep the AM loop antenna cable wrapped 
around the AM loop antenna frame, otherwise 
the effectiveness and sensitivity of the AM loop 
antenna may be reduced.
Connecting the AM loop antenna
Turn the AM loop antenna to find the best position 
for radio reception.
NOTE
• Make sure that the antenna conductors do not 
touch any other terminals. This could cause poor 
reception.
  
When radio reception with the supplied FM 
antenna is poor, or when using a...

Preparation
6
Connect the speakers to the main unit by connecting the colored connectors to the same color terminals on 
the rear of the main unit.
■  IMPORTANT
• Improper speaker cable connection reduces the 
stereo effect and sound quality. 
• The supplied left/right speakers are magnetically  shielded, but color irregularity may occur on the 
TV depending on some conditions. To prevent 
color irregularity, set up the speakers following 
the instructions below.
(The subwoofer is not magnetically...

7
Preparation
The left and right speakers can be fitted onto commercially available speaker stands. Before fitting the speak-
ers onto commercially available speaker stands, follow the instructions shown below.
Left and right speakers for NX-F7
Detach the original speaker stands.Left and right speakers for NX-F3
Remove the speaker cables from the tabs and 
slots on the speakers.
CAUTION
• The left and right speakers can be installed on a wall.
• When installing the speakers on a wall, be sure to have the...