JVC Lt Z26sx5 Instructions
Have a look at the manual JVC Lt Z26sx5 Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Troubleshooting 49 ENGLISH LT-Z32/26SX5 / LCT1869-002A / English • When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV. • Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with progressive-scanning component signals. If this occurs, change the output setting of the connected device to interlace- scanning component signal output. See the instructions that came with the device for more information. „Poor sound • Have you adjusted BASS or TREBLE properly? If not, follow the description “BASS” or “TREBLE” on page 29. • When TV channel reception is poor, it can be hard to hear stereo or bilingual sound. In this case, follow the description “STEREO / I • II” on page 29 to hear the sound more easily by changing it to a mono sound. „If the TV does not respond to the remote control • Have the batteries of the remote control worn out? Follow the description “Putting the batteries into the remote control” on page 8 and replace them with new batteries. • Have you attempted to use the remote control from the sides or rear of the TV or from more than seven metres away from the TV? Use the remote control in front of your TV or from less than seven metres away. • When you are viewing a teletext programme, you cannot operate the menus. Press the 4 button to return to the ordinary TV programme, and then try operating the menus. • If the TV suddenly stops responding, disconnect the power cord of the TV from the AC outlet. Connect them to the AC outlet again to turn on the TV. If the TV returns to a normal state, it is not a failure. „Other issues • If the CHILD LOCK function set to ON, you cannot operate the TV with the front control buttons of the TV. Set the CHILD LOCK function to OFF. • When the SLEEP TIMER function or AUTO SHUTOFF function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the # (standby) button to turn on the TV once again. If the TV goes back to normal, there is no problem. • When the TV is receiving a wide-screen signal (WSS) or a signal from an external device affecting the screen size, the ZOOM mode automatically changes. When you want to resume the previous ZOOM mode, press the c button again. • It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a fault. This is the time needed for the image to stabilise before it can be displayed. • The TV may make a crackling sound due to a sudden change in temperature. The picture or sound may be normal. If you hear crackling sounds frequently while you are viewing the TV, there may be other causes. As a precaution, ask your service technician to inspect it. • The top of the TV and the screen may become hot during use but this has no affect on the performance of the TV. Make sure that the ventilation holes are not blocked. • When the picture is unstable, the screen may become white for a moment. This happens when the signal which drives the liquid crystal is missing. This is not a fault. • When a still image has been displayed for a long period, a faint residual image may remain on the screen for a short time after the power has been turned off or when another image is displayed. This is not a fault and the image will eventually disappear. LT-Z32&26SX5_Eng.book Page 49 Wednesday, May 18, 2005 5:54 PM
50 LT-Z32/26SX5 / LCT1869-002A / English ENGLISH Specifications We may change the design and specifications without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this would be an infringement of copyright. Model LT-Z32SX5Broadcasting systems B, G, I, D, K, K1, M Colour systems PAL, SECAM, NTSC 3.58/4.43 MHz Channels and frequencies VHF low channel (VL) = 46.25 to 168.25 MHz VHF high channel (VH) = 175.25 to 463.25 MHz UHF channel (U) = 471.25 to 863.25 MHz • Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41). Sound-multiplex systems NICAM (B/G, I, D/K) system, A2 (B/G, D/K) system Languages displayed by teletext Please see the table in the description “TELETEXT LANGUAGE” on page 40. Teletext systems FLOF (Fastext), WST (World Standard System) Power requirements 110 - 240 V AC, 50/60 Hz Power consumption 147 W (Standby: 2.6 W) Screen size Viewable area 80 cm (measured diagonally) Audio output Rated Power output: 10 W + 10 W Speakers 6.6 cm round × 2 VIDEO-1 terminal (COMPONENT)RCA connector × 3, S VIDEO connector × 1, Component connector × 1 • Video input, S VIDEO (Y/C) input, Component video (Y, Cb/Pb, Cr/Pr) input and Audio L/R inputs are available. • 480i (525i), 480p (525p), 576i (625i), 576p (625p), 1080i (1125i), 720p/60 (750p/60) signals are available. VIDEO-2 terminal RCA connector × 3, S VIDEO connector × 1 • Video input, S VIDEO (Y/C) input and Audio L/R inputs are available. VIDEO-3 terminal (COMPONENT)RCA connector × 3 • Video input, Component video (Y, Cb/Pb, Cr/Pr) input and Audio L/R inputs are available. • 480i (525i), 480p (525p), 576i (625i), 576p (625p), 1080i (1125i), 720p/60 (750p/60) signals are available. VIDEO-4 (HDMI) terminal HDMI connector × 1, Digital video input and digital audio input available. (Refer to page 45 for details.) IN(HDMI AUDIO) terminal RCA connector × 2 • Audio L/R inputs are available. (Refer to page 45 for details.) OUT terminal RCA connectors × 3, S VIDEO connector × 1 • Video output, S VIDEO (Y/C) output and Audio L/R outputs are available. • Output level 0.5 Vrms. PC IN terminal Analogue RGB D-SUB (15 pin) × 1 • PC signal is available. Refer to page 41 for details of the signals which can be input. Headphone jack Stereo mini-jack (3.5 mm in diameter) Dimensions (W × H × D) 808 mm × 627.2 mm × 308.4 mm 808 mm × 558.5 mm × 108 mm (without stand) Weight 20.4 kg 17.0 kg (without stand) Accessories Remote control unit × 1 (RM-C1830) AA/R6 dry cell battery × 2 Component video cable × 1 LT-Z32&26SX5_Eng.book Page 50 Wednesday, May 18, 2005 5:54 PM
Specifications 51 ENGLISH LT-Z32/26SX5 / LCT1869-002A / English We may change the design and specifications without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this would be an infringement of copyright. Model LT-Z26SX5Broadcasting systems B, G, I, D, K, K1, M Colour systems PAL, SECAM, NTSC 3.58/4.43 MHz Channels and frequencies VHF low channel (VL) = 46.25 to 168.25 MHz VHF high channel (VH) = 175.25 to 463.25 MHz UHF channel (U) = 471.25 to 863.25 MHz • Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41). Sound-multiplex systems NICAM (B/G, I, D/K) system, A2 (B/G, D/K) system Languages displayed by teletext Please see the table in the description “TELETEXT LANGUAGE” on page 40. Teletext systems FLOF (Fastext), WST (World Standard System) Power requirements 110 - 240 V AC, 50/60 Hz Power consumption 116 W (Standby: 2.6 W) Screen size Viewable area 64.8 cm (measured diagonally) Audio output Rated Power output: 10 W + 10 W Speakers 6.6 cm round × 2 VIDEO-1 terminal (COMPONENT)RCA connector × 3, S VIDEO connector × 1, Component connector × 1 • Video input, S VIDEO (Y/C) input, Component video (Y, Cb/Pb, Cr/Pr) input and Audio L/R inputs are available. • 480i (525i), 480p (525p), 576i (625i), 576p (625p), 1080i (1125i), 720p/60 (750p/60) signals are available. VIDEO-2 terminal RCA connector × 3, S VIDEO connector × 1 • Video input, S VIDEO (Y/C) input and Audio L/R inputs are available. VIDEO-3 terminal (COMPONENT)RCA connector × 3 • Video input, Component video (Y, Cb/Pb, Cr/Pr) input and Audio L/R inputs are available. • 480i (525i), 480p (525p), 576i (625i), 576p (625p), 1080i (1125i), 720p/60 (750p/60) signals are available. VIDEO-4 (HDMI) terminal HDMI connector × 1, Digital video input and digital audio input available. (Refer to page 45 for details.) IN(HDMI AUDIO) terminal RCA connector × 2 • Audio L/R inputs are available. (Refer to page 45 for details.) OUT terminal RCA connectors × 3, S VIDEO connector × 1 • Video output, S VIDEO (Y/C) output and Audio L/R outputs are available. • Output level 0.5 Vrms. PC IN terminal Analogue RGB D-SUB (15 pin) × 1 • PC signal is available. Refer to page 41 for details of the signals which can be input. Headphone jack Stereo mini-jack (3.5 mm in diameter) Dimensions (W × H × D) 703 mm × 553 mm × 308.3 mm 703 mm × 483 mm × 107 mm (without stand) Weight 19.6 kg 16.2 kg (without stand) Accessories Remote control unit × 1 (RM-C1830) AA/R6 dry cell battery × 2 Component video cable × 1 LT-Z32&26SX5_Eng.book Page 51 Wednesday, May 18, 2005 5:54 PM
52 LT-Z32/26SX5 / LCT1869-002A / English ENGLISH LT-Z32&26SX5_Eng.book Page 52 Wednesday, May 18, 2005 5:54 PM
LT-Z32SX5 / LCT1869-002A / All Cover Cover03 LT-Z32&26SX5_Eng.book Page 1 Wednesday, May 18, 2005 5:54 PM
© 2005 Victor Company of Japan, Limited LT-Z32/26SX5 / LCT1869-001A-H / All Cover Cover04 0505TKH-CR-MT Cover4.fm Page 2 Thursday, May 19, 2005 4:18 PM