JVC Lt Z26sx5 Instructions

							Remote control buttons and functions
19
ENGLISH
LT-Z32/26SX5 / LCT1869-002A / English
Operating a JVC brand DVD 
player
These buttons will operate a JVC brand DVD 
player. Pressing a button that looks the same 
as the device’s original remote control button 
has the same effect as the original remote 
control.
1 Set the PIP/TV/DVD switch to the 
DVD position
When you are operating the DVD player, 
set the switch to the DVD position.
• You can turn the DVD player on or off 
with the # (standby) button.
• You can also press the H or 
T button and display the 
DVD disc menu screen, and then 
operate by pressing the 7 
buttons.
2 Press the DVD control button to 
control your DVD player
• If your DVD player is not made by 
JVC, these buttons will not work.
• Even if your device is made by JVC, 
some of these buttons may not work, 
depending on the device you are using.
You cannot turn the TV on or off when the 
PIP/TV/DVD switch is set to the DVD 
position.
When you turn the TV on or off, set the 
PIP/TV/DVD switch to the TV position.
LT-Z32&26SX5_Eng.book  Page 19  Wednesday, May 18, 2005  5:54 PM
 
						

							20
LT-Z32/26SX5 / LCT1869-002A / English
ENGLISH
Teletext function
Basic operation
1 Choose a TV channel with a teletext 
broadcast
2 Set the PIP/TV/DVD switch to the 
TV position
3 Press g (Text) button to display 
the teletext
Pressing g (Text) button changes the 
mode as follows:
4 Choose a teletext page by pressing 
the 6 p buttons, 
number buttons or colour buttons
To return to the TV mode:
Press the 4 button, b 
button, or g (Text) button.
• If you have trouble receiving teletext 
broadcasts, consult your local dealer or 
the teletext station.
• The ZOOM function will not work in 
the TV and text mode or Text mode.
• You cannot operate menus when 
viewing a teletext programme.
• If characters on a teletext programme 
do not appear properly, change the 
TELETEXT LANGUAGE setting. For 
details, see “TELETEXT 
LANGUAGE” on page 40.
Using the List Mode
You can store the numbers of your favourite 
teletext pages in memory and call them up 
quickly using the colour buttons.
„To store the page numbers:
1 Press B button to go into the 
List mode
The page numbers you have stored are 
displayed at the bottom of the screen.
PIP/TV/
DVD
TEXT ---TEXT ---
TEXT ---TEXT ---
D1043
TV mode
TV and text mode
Text mode
LT-Z32&26SX5_Eng.book  Page 20  Wednesday, May 18, 2005  5:54 PM
 
						

							Teletext function
21
ENGLISH
LT-Z32/26SX5 / LCT1869-002A / English
2 Press a colour button to choose a 
position. Then press the number 
buttons to enter the page number
3 Press and hold down the A (Store) 
button
The four page numbers blink white to 
show that they are stored in memory.
„To call up a stored page:
1 Press the B button to enter the 
List mode
2 Press a colour button having a 
stored page
To exit the List mode:
Press the B button again.
Hold
You can hold a teletext page on the screen for 
as long as you want, even while several other 
teletext pages are being received.
Press the C (Hold) button
To cancel the Hold function:
Press C (Hold) button again.
Sub-page
Some teletext pages include sub-pages that 
are automatically displayed.
1 Choose a teletext page that 
includes sub-pages
Sub-page numbers that can be viewed are 
automatically displayed at the top of the 
screen.
2 Press the 5 buttons to choose a 
sub-page number
Reveal
Some teletext pages include hidden text 
(such as answers to a quiz).
You can display the hidden text.
Each time you press the E (Reveal) 
button, text is hidden or revealed
Size
You can double the height of the teletext 
display.
Press the F (Size) button
Hold indication
LT-Z32&26SX5_Eng.book  Page 21  Wednesday, May 18, 2005  5:54 PM
 
						

							22
Teletext function
LT-Z32/26SX5 / LCT1869-002A / English
ENGLISH
Index
You can return to the index page instantly.
Press the G (Index) button
Returns to page 100 or a previously specified 
page.
Cancel
You can search for a teletext page while 
watching TV.
1 Press the number button to enter a 
page number, or press a colour 
button
The TV searches for a teletext page.
2 Press H (Cancel) button
The TV programme appears. When the 
TV finds the teletext page, its page 
number appears in the upper left of the 
screen.
3 Press H (Cancel) button to return 
to a teletext page when the page 
number is on the screen
• The TV mode cannot be resumed by 
pressing the H (Cancel) button. To 
return to the TV mode press 
4 or b button.
LT-Z32&26SX5_Eng.book  Page 22  Wednesday, May 18, 2005  5:54 PM
 
						

							23
ENGLISH
LT-Z32/26SX5 / LCT1869-002A / English
Using the TV’s menu
This TV has a number of functions you can 
operate using menus. To use all your TV’s 
functions, you need to understand the basic 
menu operating techniques fully.
Buttons used to operate the menus
Basic operation
1 Press the H button to display 
the menu bar
2 Press the 5 buttons to choose 
the menu you want to use and then 
press the a button
3 Press the 6 buttons to choose 
the item to be set, press the 5 
buttons to set the item, and then 
press the a button
If there are sub-menus, use the 7 
buttons to operate them.
• Press the b button to return to 
the previous menu.
• Press the 4 or H 
button to exit from the menu.
• Some menu items may not be operated 
or set depending on the TV status, input 
signal or other menu item settings.
Menu items that cannot be operated or 
set are displayed in grey in the menu 
and cannot be chosen.
Types of menu
• The menu will disappear after about 
one minute if no operation is 
performed.
The menu guide area can be made to appear 
and disappear for some menus.
While the menu is displayed, press the 
5 button to change between the 
guide area being displayed and not displayed.
• The guide area for some menus will still 
be displayed even if the 5 
button is pressed. This is not a fault.
D0105
PICTURE
-EN
D1105
PICTURE
-ENChosen 
menu name Chosen 
menu
PICTURE menu
Choose to set the screen 
settings.
SOUND menu
Choose to set the sound settings.
FEATURES menu
Choose to set the sleep timer 
and child lock settings.
SET UP menu
Choose to edit the channels or 
set the display language 
settings.
D0106
D0107
D0108
D0109
D0017
>>
OK
PANORAMIC
4:3 AUTO ASPECT
REGULAR
14:9 ZOOM
-EN
D1017
>>
PANORAMIC
REGULAR
14:9 ZOOM4:3 AUTO ASPECT
-EN
Guide area
LT-Z32&26SX5_Eng.book  Page 23  Wednesday, May 18, 2005  5:54 PM
 
						

							24
Using the TV’s menu
LT-Z32/26SX5 / LCT1869-002A / English
ENGLISH
Operation with the buttons on the TV
You can also operate the menus using the 
buttons on the front panel of the TV.
5 buttons 6 buttons TV/VIDEO button
MENU/OK button
LT-Z32&26SX5_Eng.book  Page 24  Wednesday, May 18, 2005  5:54 PM
 
						

							25
ENGLISH
LT-Z32/26SX5 / LCT1869-002A / English
PICTURE menu
• While the PICTURE menu is displayed, 
pressing the blue button will set the 
BACK LIGHT, CONTRAST, BRIGHT, 
SHARP, COLOUR, TINT settings to 
their default settings.
• When watching the picture from VIDEO-
1 to VIDEO-4 (HDMI) or the PC, picture 
effect settings can be memorised for each 
external input by setting the picture 
effects in the PICTURE menu.
The following items in the PICTURE 
menu are memorised.
PICTURE MODE
BACK LIGHT
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
WHITE BALANCE
DIGITAL VNR
COLOUR SYSTEM
The last setting made for each item is 
memorised.
PICTURE MODE
You can choose one of three PICTURE 
MODEs to adjust the picture settings 
automatically.
BRIGHT:
Heightens contrast and sharpness.
STANDARD:
Standardises picture adjustment.
SOFT:
Softens contrast and sharpness.
BACK LIGHT
You can adjust the back light.
2 : darker
3 : brighter
CONTRAST
You can adjust the picture contrast.
2 :lower
3 : higher
BRIGHT
You can adjust the picture brightness.
2 : darker
3 : brighter
SHARP
You can adjust the picture sharpness.
2 : softer
3 :sharper
COLOUR
You can adjust the picture colour.
2 : lighter
3 :deeper
TINT
You can adjust the picture tint.
2 : reddish
3 :greenish
• You can change the TINT setting (picture 
hue) when the colour system is NTSC 
3.58, or NTSC 4.43.
WHITE BALANCE
You can select one of three WHITE 
BALANCE modes (three tones of white) to 
adjust the white balance of the picture. Since 
white is the colour which is used as a 
reference for all the other colours, changing 
the WHITE BALANCE mode affects the 
appearance of all the other colours on the 
screen.
PICTURE MODE
COOL STANDARD PICTURE
D0014
OKRESET
CONTRASTBACK LIGHT
BRIGHT
SHARP
COLOUR
TINT
WHITE BALANCE
FEATURES
-EN
LT-Z32&26SX5_Eng.book  Page 25  Wednesday, May 18, 2005  5:54 PM
 
						

							26
PICTURE menu
LT-Z32/26SX5 / LCT1869-002A / English
ENGLISH
COOL:
A bluish white. Using this mode when 
watching bright pictures allows you to enjoy 
a more vivid and bright picture.
MID:
The normal white colour.
WARM:
A reddish white. Using this mode when 
watching films allows you to enjoy colours 
that are characteristic of films.
FEATURES
Choose FEATURES and press the a or 3 
button to display the sub-menu.
„DIGITAL VNR
The DIGITAL VNR function cuts down the 
amount of ‘noise’ (‘snow’ or interference) in 
the original picture.
You can choose from the three DIGITAL 
VNR function settings of AUTO, MIN and 
MAX.
AUTO(LOW)/AUTO(HIGH):
The TV will automatically adjust the level of 
the DIGITAL VNR effect to match the 
amount of noise in the picture, giving you the 
best possible picture.
• If you set the DIGITAL VNR effect too 
high it can make the picture less sharp. It is 
recommended you use the AUTO(LOW) 
setting if you can. If you set the DIGITAL 
VNR function to AUTO(LOW) but still 
notice some noise, change the setting from 
AUTO(LOW) to AUTO(HIGH).
MIN:
The level of the DIGITAL VNR effect is set 
to the minimum. If you set the DIGITAL 
VNR function to AUTO(LOW) but feel that 
the sharpness of the original picture has not 
been reproduced fully, change the setting 
from AUTO(LOW) to MIN.
• The MIN setting is not suitable for low-
quality pictures which contain a lot of 
noise.
MAX:
The level of the DIGITAL VNR effect is set 
to the maximum. If you set the DIGITAL 
VNR function to AUTO(HIGH) but still 
notice some noise, change the setting from 
AUTO(HIGH) to MAX.
• The MAX setting is not suitable for high-
quality pictures which contain very little 
noise.
„Super DigiPure
The Super DigiPure function uses the latest 
in digital technology to give you a natural-
looking picture. The Super DigiPure function 
includes the following two functions.
DigiPure function:
This function helps to create a natural-
looking picture by eliminating unnecessary 
edges from high-contrast and crisp images. 
For images with low-contrast, edges are 
added to produce a sharper, more detailed 
picture.
You can choose from the three DigiPure 
function settings of AUTO, MIN and MAX.
• If you set the DigiPure effect too high on 
a low-quality picture that contains a lot of 
noise, this may actually make the noise 
worse. We recommend you use the 
AUTO setting if you can.
Picture motion compensation 
function:
This function displays fast-moving pictures 
(for example, the players or ball in a football 
game) more smoothly and naturally on the 
screen.
• The effect level of the picture motion 
compensation function cannot be 
changed. The effect level is the same no 
matter which of the AUTO, MIN or MAX 
settings is used.
D1015
DIGITAL VNR
Super DigiPureAUTO(LOW) >
ON
OK
FEATURES
PULL DOWN
COLOUR MANAGEMENT
PICTURE MANAGEMENT
COLOUR SYSTEM
4:3 AUTO ASPECTAUTO
AUTO
ON
-EN
LT-Z32&26SX5_Eng.book  Page 26  Wednesday, May 18, 2005  5:54 PM
 
						

							PICTURE menu
27
ENGLISH
LT-Z32/26SX5 / LCT1869-002A / English
AUTO:
The TV will automatically adjust the level of 
the DigiPure effect to match the amount of 
noise in the picture, giving the best possible 
picture.
MIN:
The level of DigiPure effect is set to the 
minimum. When you set the Super DigiPure 
function to AUTO and notice some noise, 
change the setting from AUTO to MIN.
• The MIN setting is not suitable for high-
quality pictures which contain very little 
noise.
MAX:
The level of DigiPure effect is set to the 
maximum. If you set the Super DigiPure 
function to AUTO but feel that the original 
picture quality has not been reproduced fully, 
change the setting from AUTO to MAX.
• The MAX setting is not suitable for low-
quality pictures which contain a lot of 
noise.
OFF:
The Super DigiPure function is turned off.
„PULL DOWN
The PULL DOWN function displays a 
cinema film picture more smoothly and 
naturally on the screen.
AUTO:
The television automatically recognises the 
type of signal and turns the function on and 
off.
ON:
This function is turned on.
OFF:
This function is turned off.
„COLOUR MANAGEMENT
This TV supports the COLOUR 
MANAGEMENT function to ensure dull 
colours are compensated to produce natural 
hues.
The COLOUR MANAGEMENT function is 
on by default.
ON:
COLOUR MANAGEMENT function is 
turned on.
OFF:
COLOUR MANAGEMENT function is 
turned off.
• Set this function to ON under normal 
conditions.
„PICTURE MANAGEMENT
The PICTURE MANAGEMENT function 
makes it easier to see the dark areas when a 
picture has many dark areas, and makes it 
easier to see the bright areas when a picture 
has many bright areas.
Normally use with this function on.
ON:
PICTURE MANAGEMENT function is 
turned on.
OFF:
PICTURE MANAGEMENT function is 
turned off.
„COLOUR SYSTEM
The colour system is chosen automatically. 
However, if the picture is not clear or no 
colour appears, choose the colour system 
manually.
1 Choose COLOUR SYSTEM. Then 
press the a or 3 button
The sub-menu of the COLOUR SYSTEM 
function appears.
D0016
>>
MAIN
SUB
PAL
AUTO
OK
COLOUR SYSTEM
-EN
LT-Z32&26SX5_Eng.book  Page 27  Wednesday, May 18, 2005  5:54 PM
 
						

							28
PICTURE menu
LT-Z32/26SX5 / LCT1869-002A / English
ENGLISH
2 Press the 5 buttons to choose 
MAIN or SUB
MAIN:
You can change the colour system of the 
main-picture.
SUB:
You can change the colour system of the 
sub-picture.
• Choose MAIN when a sub-picture is 
not displayed.
3 Press the 6 buttons to choose 
the appropriate colour system. 
Then press the a button
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system 
from the input signal.
• The AUTO function may not function 
properly if you have poor signal quality. 
If the picture is abnormal in the AUTO 
function, choose another colour system 
manually.
For colour system in your country or 
region, refer to the table below:
„4:3 AUTO ASPECT
You can choose one of three ZOOM modes, 
REGULAR, PANORAMIC or 14:9 ZOOM, 
as the ZOOM mode for the normal picture 
(4:3 aspect ratio).
1 Choose 4:3 AUTO ASPECT then 
press the a button
2 Press the 6 buttons to choose a 
ZOOM mode
Area  Country or Region System
Asia, 
Middle 
East Bahrain, Kuwait, Oman, 
Qatar, United Arab Emirates, 
Yemen, etc.
Indonesia, Malaysia, 
Singapore, Thailand, India, 
etc. PAL
China, Vietnam, etc.  PAL
Hong Kong, etc. PAL
Islamic Republic of Iran, 
Lebanon, Saudi Arabia, etc.SECAM
Philippines, Taiwan, 
Myanmar, etc.NTSC
EuropeRussia, etc. SECAM
Czech Republic, Poland, etc. PAL
Germany, Holland, Belgium, 
etc.PAL
UK, etc. PAL
Oceania Australia, New Zealand, etc. PAL
AfricaRepublic of South Africa, etc. PAL
Nigeria, etc. PAL
Egypt, Morocco, etc. SECAM
D0017
>>
OK
PANORAMIC
4:3 AUTO ASPECT
REGULAR
14:9 ZOOM
-EN
LT-Z32&26SX5_Eng.book  Page 28  Wednesday, May 18, 2005  5:54 PM