JVC Lt 32wx50 Instructions
Have a look at the manual JVC Lt 32wx50 Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Menu index by taskPage Hue adjustment General tone of color Tint 14 Tone of color (including white) Color Temperature 19 Tone of color (in detail) White Balance Setting 19 Range of color representation Color Space 18 Amplitude of the color difference signal Tint Setting › BY Gain 14 Demodulation angle of the color difference signal Tint Setting › BY/RY Angle 14 Pattern of color correction Color Management 20 Color correction (in detail) Color Mngmt. Setting › Red Tint , Yellow Tint , etc.20 Color adjustment Total density of color Color 14 Amplitude of the color difference signal Tint Setting › BY Gain 14 Demodulation angle of the color difference signal Tint Setting › BY/RY Angle 14 Pattern of color correction Color Management 20 Color correction (in detail) Color Mngmt. Setting › Red Color , Yellow Color , etc.20 Brightness (backlight) Total brightness of pictures Backlight 16 Reduces backlight in bright scenes Backlight Setting › Smart Picture 17 Reduces backlight in dark scenes Backlight Setting › Dynamic Backlight 17 Adjusts backlight depending on the luminance of the room Eco Mode 24 Brightness (signal) Total brightness of pictures Brightness 15 Adjusts the gain of the signal level Contrast 15 Emphasizes darker areas automatically Contrast Setting › Black Stretch 15 Reduces brightness in bright scenes Contrast Setting › Dynamic DC Offset 15 Emphasizes bright areas automatically Contrast Setting › Auto Contrast 15 Gamma correction value Gamma 21 Adjusts gamma value automatically Dynamic Gamma 21 Sharpness Sharpness Sharpness 16 Sharpness (in detail) Enhancer Setting 16 Frequency band to enhance Enhancer 16 Sound Bass sound Bass 25 Treble sound Treble 25 Equalizer suited for the speakers PEQ 26 Adjusts the delay time of sound Lip Sync 25 A-12 -589@@VT@FOJOEC-589@@VT@FOJOEC..
13 Changing the settings : Picture Picture Memory Setting You can store up to 6 sets of the “ Picture ” settings and use them. ● When the input is changed, the memory used for the input last time is automatically applied. ■ Memory1 / Memory2 / Memory3 / Memory4 / Memory5 / Memory6 Load Preset You can load one of the presets below into a memory. You can do further adjustment based on the loaded settings. ● Select a preset and press “ Load ” to load a preset. ■ Dynamic : Makes pictures colorful and bright, suitable for watching in a well-light room. ■ Standard : The most standard setting. ■ Theater : Suitable for watching cinemas in a dark room. ■ Monitor : Does not apply color adjustments or noise reductions.Input video signals are displayed as they are. ■ Photo Pro : Suitable for watching still pictures of SLR digital cameras. ■ Game : Gives priority to the response time for picture movement. Suitable for game consoles. ■ Signage : Suitable for digital signage use in market, shops or hotels. ■ CCTV HD : Suitable for monitoring CCTVs in HD format. ■ CCTV SD : Suitable for monitoring CCTVs in SD format. ■ Option : Suitable for displaying medical images including x-ray pictures. ● This setting is only for approximate presentation and does not conform to any official standard of medical imaging. -589@@VT@FOJOEC-589@@VT@FOJOEC..
14 Tint Adjusts the tone of color. ■ –30 – +30 (Skin color reddish ↔ Skin color greenish) Tint Setting Adjusts the tone of color in detail. ● The setting is fixed to 0 and unadjustable when “ Color Space ” is set to “ sRGB ”, “ AdobeRGB ”, or “ x.v.Color ”. ● The setting is fixed to 0 and unadjustable when “ Color Space ” is set to “ Auto ” and the xvYCC signal is input to the HDMI terminal. ● The setting is fixed to 0 and unadjustable when “ PC Monitor Mode ” is set to “ On ”. ◆ BY Gain Adjusts the amplitude of the B-Y color difference signal. You can modify the total coloring of the picture. ■ –30 – +30 (Small amplitude ↔ Large amplitude) ◆ BY/RY Angle Adjusts the demodulation angle between the B-Y color difference signal and the R-Y color difference signal. You can modify the total coloring of the picture. ■ –15 – +15 (Decreasing the angle ↔ Increasing the angle) Color Adjusts the density of color. ■ –30 – +30 (Dilute ↔ Dense) -589@@VT@FOJOEC-589@@VT@FOJOEC..
15 Changing the settings : Picture Contrast Adjusts the brightness of brighter areas of pictures. ■ –30 – +30 (Dark ↔ Bright) Contrast Setting Adjusts settings of functions relating with contrast. ● The functions are not available when “ Color Space ” is set to “ sRGB ” or “ AdobeRGB ”. ● The functions are not available when “ PC Monitor Mode ” is set to “ On ”. ◆ Black Stretch Emphasizes darker areas depending on the characteristics of a picture to make contrast clearer. ■ High / Medium / Low / Off ◆ Dynamic DC Offset Controls the blackness of the picture automatically depending on the total brightness. ■ On / Off ◆ Auto Contrast Emphasizes brighter areas depending on the characteristics of a picture to make contrast clearer. ■ On / Off Brightness Adjusts blackness. ■ –30 – +30 (Dark ↔ Bright) -589@@VT@FOJOEC-589@@VT@FOJOEC..
16 Sharpness Emphasizes outlines on a picture. ● The setting is unadjustable when “ Enhancer ” is set to “ Off ”. ■ –30 – +30 (Fuzzy ↔ Sharp) Enhancer Selects the frequency band enhanced by “ Sharpness ”. ■ Off : Deactivates the function. ■ Mode-1 / Mode-2 / Mode-3 (Emphasizes lower frequency band; for low-resolution picture ↔ Emphasizes higher frequency band; for high-resolution picture) Enhancer Setting Adjusts the effects of “ Enhancer ” in detail. ● All the settings are unadjustable when “ Enhancer ” is set to “ Off ”. ◆ Detail Adjusts texture of surface. ■ –15 – +15 (Weaker ↔ Stronger) ◆ H.Sharp Adjusts sharpness of horizontal outlines. ■ –15 – +15 (Weaker ↔ Stronger) ◆ V.Sharp Adjusts sharpness of vertical outlines. ■ –15 – +15 (Weaker ↔ Stronger) Backlight Adjusts the brightness of backlight. ■ –30 – +30 (Darker ↔ Brighter) -589@@VT@FOJOEC-589@@VT@FOJOEC..
17 Changing the settings : Picture Backlight Setting Adjusts settings of functions relating with backlight. ◆ Smart Picture Reduces the backlight automatically in dazzling scenes. ■ On / Off ◆ Dynamic Backlight Reduces the backlight automatically in dark scenes to represent black deeper. ■ High / Medium / Low / Off Color System Selects the color system for the picture signal which is input to INPUT-3 from composite terminal. ● The setting is adjustable only when “ Input-3 Setting ” is set to “ Composite ”. (➔ page 31) ● The setting is unadjustable when “ PC Monitor Mode ” is set to “ On ”. ■ Auto : An appropriate color system is automatically applied depending on the type of the input signal. Normally select this. ■ PAL/50 : When the color system is PAL. ■ PAL/60 : When the color system is PAL 60. ■ SECAM : When the color system is SECAM. ■ NTSC3.58 : When the color system is NTSC 3.58. ■ NTSC4.43 : When the color system is NTSC 4.43. ■ PAL M : When the color system is PAL-M. ■ PAL N : When the color system is PAL-N. -589@@VT@FOJOEC-589@@VT@FOJOEC..
18 Color Matrix Selects the color matrix used for color conversion. ● The setting is fixed to “ Auto ” and unadjustable when “ Color Space ” is set to “ sRGB ”, “ AdobeRGB ”, or “ x.v.Color ”. ● The setting is fixed to “ Auto ” and unadjustable when ” PC Monitor Mode ” is set to “ On ”. ● The setting is fixed to “ Auto ” and unadjustable when “ Color Space ” is set to “ Auto ” and the xvYCC signal is input to the HDMI terminal. ■ Auto : An appropriate color matrix is applied automatically. ■ 709 : The color matrix conforming ITU-R BT.709 is used for conversion. ■ 601 : The color matrix conforming ITU-R BT.601 is used for conversion. Color Space Changes the range of color representation. ● “ sRGB ” or “ AdobeRGB ” is selectable when “ PC Monitor Mode ” is set to “ On ”. ● Even when “ Auto ” is selected, the setting may not switch to “ x.v.Color ” automatically depending on the connected device or the connection status. ■ Auto : Normally applies “ Wide ”. When the xvYCC signal is input to the HDMI terminal, “ x.v.Color ” is applied automatically. When the Photo viewer is selected, “Normal” is applied automatically. ■ Normal : HDTV standard. ■ Wide : The wide color gamut of the equipped LCD panel. (Wider than the HDTV standard.) ■ x.v.Color : Color representation suitable for x.v.Color. ■ sRGB : Color representation suitable for sRGB. ■ AdobeRGB : Color representation suitable for AdobeRGB. -589@@VT@FOJOEC-589@@VT@FOJOEC..
19 Changing the settings : Picture Color Temperature Adjusts the color temperature (color tone). The higher the color temperature, the more bluish the picture. ● The setting is fixed to “ Mode-5 ” and unadjustable when “ Color Space ” is set to “ sRGB ” or “ AdobeRGB ”. ● The setting is fixed to “ Mode-5 ” and unadjustable when “ PC Monitor Mode ” is set to “ On ”. ■ Mode-1 : Bluish display. (approx. 13000 K) ■ Mode-2 : Less bluish than “ Mode-1 ”. (approx. 11000 K) ■ Mode-3 : For general purpose. (approx. 9300 K) ■ Mode-4 : For special purposes including medical imaging. (approx. 8000 K) ■ Mode-5 : Standard setting. (approx. 6500 K) ■ Mode-6 : For conformation of images for printing. (approx. 5000 K) ■ Mode-7 : Significantly reddish setting intended for special usages in television studios. (approx. 3200 K) White Balance Setting Adjusts color temperature in detail; subtle control of RGB gradations. ● These settings are independent of the setting of “ Color Temperature ”. ◆ R Drive / G Drive / B Drive Adjusts the depth of R/G/B on bright areas. ■ –30 – +30 (Dilute ↔ Dense) ◆ R Cutoff / G Cutoff / B Cutoff Adjusts the depth of R/G/B on dark areas. ■ –30 – +30 (Dilute ↔ Dense) -589@@VT@FOJOEC-589@@VT@FOJOEC..
20 Color Management Adjusts the total coloring of pictures. Three color management presets are available to suit a variety of color temperature settings. ● The setting is fixed to “ Off ” and unadjustable when “ Color Space ” is set to “ sRGB ”, “ AdobeRGB ”, or “ x.v.Color ”. ● The setting is fixed to “ Off ” and unadjustable when ” PC Monitor Mode ” is set to “ On ”. ● The setting is fixed to “ Off ” and unadjustable when “ Color Space ” is set to “ Auto ” and the xvYCC signal is input to the HDMI terminal. ■ Mode-1 : Improving the vividness of colors. Suitable for high color temperature. ■ Mode-2 : Standard colors. Suitable for medium color temperature. ■ Mode-3 : Improving the total toning of colors. Suitable for low color temperature. ■ Off : Deactivates the function. Color Mngmt. Setting Adjusts the total coloring of pictures in detail. ● All the settings are fixed to 0 and unadjustable when ” Color Management ” is set to “ Off ”. ● All the settings are fixed to 0 and unadjustable when “ Color Space ” is set to “ sRGB ”, “ AdobeRGB ”, or “ x.v.Color ”. ● All the settings are fixed to 0 and unadjustable when ” PC Monitor Mode ” is set to “ On ”. ● All the settings are fixed to 0 and unadjustable when “ Color Space ” is set to “ Auto ” and the xvYCC signal is input to the HDMI terminal. ◆ Red Tint / Red Color Adjusts the tone/colorfulness of red colors. ■ –15 – +15 (Magenta ↔ Yellow) / –30 – +30 (Dilute ↔ Dense) ◆ Yellow Tint / Yellow Color Adjusts the tone/colorfulness of yellow colors. ■ –15 – +15 (Red ↔ Green) / –30 – +30 (Dilute ↔ Dense) -589@@VT@FOJOEC-589@@VT@FOJOEC..
21 Changing the settings : Picture ◆ Green Tint / Green Color Adjusts the tone/colorfulness of green colors. ■ –15 – +15 (Yellow ↔ Cyan) / –30 – +30 (Dilute ↔ Dense) ◆ Cyan Tint / Cyan Color Adjusts the tone/colorfulness of blue colors. ■ –15 – +15 (Green ↔ Blue) / –30 – +30 (Dilute ↔ Dense) ◆ Skin Tint / Skin Color Adjusts the tone/colorfulness of skin colors. ■ –15 – +15 (Red ↔ Yellow) / –30 – +30 (Dilute ↔ Dense) ◆ Color : Bright Area Adjusts the color depth of bright areas. ■ –15 – +15 (Dilute ↔ Dense) ◆ Color : Dark Area Adjusts the color depth of dark areas. ■ –15 – +15 (Dilute ↔ Dense) Gamma Adjusts the gamma correction value and controls the brightness and gradation of intermediately bright areas. ■ Mode-1 : For confirmation of images for printing. (Equivalent to γ 1.8) ■ Mode-2 : For general purpose. (Equivalent to γ 2.0) ■ Mode-3 : Standard setting. (Equivalent to γ 2.2) ■ Mode-4 : Setting designed according to general CRT property. (Equivalent to γ 2.4) ■ Mode-5 : For viewing digital cinemas. (Equivalent to γ 2.6) ■ Mode-6 : For special purposes including medical imaging. Complies with GSDF (Grayscale Standard Display Function). ■ Mode-7 : Dark areas are brighter when compared to “ Mode-3 ”. Dynamic Gamma Adjusts gamma value automatically depending on the brightness of pictures. ■ High / Medium / Low / Off -589@@VT@FOJOEC-589@@VT@FOJOEC..