JVC Lt 32wx50 Instructions

							04
 Inserting batteries into the remote control
When replacing the batteries
To avoid short-circuit, place the minus 
end of the batteries first.
● Batteries shall not be exposed to 
excessive heat such as direct sunshine, fire or the like.
● Read the precautions on the battery.
● The batteries last about 6 to 12 months on regular usage.
● The included batteries are supplied for operation check and may last shorter.
● Main unit (monitor)
● Speaker  unit
● Stand
● VESA  bracket
● M4 x 8 screws (for the stand or 
VESA bracket, × 4)
● M3 x 12 screw (for the HDMI 
cover, × 1)
● Remote  control 
unit, AAA size 
batteries
● Video cable (D-sub 15 pin / RCA)
● Audio cable (3.5 mm stereo mini / 
RCA)
● RS-232C extension cable
● Video cable (D-sub 15 pin)
● Power  cable
● AC  adapter
● HDMI cover, AC terminal cover, 
D-sub cover, hook hole covers
(× 2), bottom covers (× 2)
● SD card cover (× 1), screw (× 1)
● Instructions (this book), startup 
sheet, other printed material
Installation
Included items
If this symbol is shown, 
it is only valid in the 
European Union
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							05
Installation
Attaching the covers
● Attach the HDMI cover (3) and AC terminal cover (5) after connections have 
been made. Fix the HDMI cover to the unit using the supplied screw. Break off 
the bottom right of the HDMI cover when you want to extend the HDMI cable 
backwards.
● Attach the D-sub cover (1), hook hole covers (2) and bottom covers (4) when 
the respective openings are not in use.
Attaching the speaker unit
Connect the speaker unit to the monitor if you do not connect any other 
external audio output device.
● Set the volume to the minimum level and turn the power off before you attach 
the speaker unit to the monitor.
● Refer to the startup sheet for details.
Installation
Install the unit properly referring to the cautions from pages ii to vii.
● Attach the stand (supplied) to stand the monitor. Refer to the startup sheet for 
details.
● Attach the VESA bracket using the supplied screws when installing the monitor 
on the wall. Refer to the startup sheet for details. Consult a specialist when you 
install the monitor on the wall.
1
22
3445
1
2
3
4
5
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							06
 Connecting external devices
 To connect a computer  To connect a device with a composite terminal  To connect a device with component terminals
To INPUT-1/INPUT-2 
terminals Green
 To connect a DVI device
To connect an HDMI deviceø 3.5 mm stereo 
mini plug
To INPUT-1 terminal
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							07
Installation
INPUT-1: HDMITM 
terminal
INPUT-2: HDMITM terminal
INPUT-3: 
D-sub 15 pin
INPUT-4 :
SD card slot,
USB type slot
(➔ page 36)
AUDIO IN terminal : 
3.5 mm stereo mini 
jack
RS-232C 
terminal
(➔ page 40)
A: Video cable (supplied)
B: Audio cable (supplied)
C: Video cable (supplied)
D: RS-232C extension cable (supplied)
a: Component cable (sold separately)
b: Audio cable (sold separately)
c: Video cable (sold separately)d: VGA cable (sold separately)
e: Audio cable (sold separately)
f: DVI-HDMI cable (sold separately)
g: HDMI cable (sold separately)
● When using the INPUT-3 terminal, set “ Input-3 Setting ” (➔ page 31) properly 
according to the connected device.
● To reduce noise, use a VGA cable with core filters.
● When you connect a DVI device to INPUT-2, only the video signal is played 
back, and the sound signal is not.
● HDMITM (V.1.3, with Deep Color, with x.v.ColorTM, HDMITM CEC Support)
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							Menu LanguageInteractive Plug-in Menu
English(EU)
SetPrevious 2/4
English(US)
Suomi
Français(EU)
Français(US)
Deutsch
Ελληνιά
Magyar
Next English(EU)
08
 Connecting the power cable/AC Adapter
● Ground the earth plug of the power cable to the earth terminal of the AC 
outlet.
Initial settings
When you turn on the monitor for the first time, initial settings start. Select 
the menu language and the place of installation.
1  Select the menu language.
1-1  Select “ Menu Language ” and press 
the [OK] button.
1-2  Select from the list the language 
you want using the [
] 
buttons, and press the [OK] 
button.
1-3  Select [Set] and press the [OK] 
button.
2  Select the place of installation.
2-1  Select “ Place of Installation ” and press the [OK] button.
2-2  Select the place of installation using the [
] buttons, and press 
the [OK] button.
2-3  Select [Set] and press the [OK] button.
● Whichever place you select in step 2, settings and functions are the same.
● In steps 1-1 and 2-1, you can also select a setting by pressing the [] buttons.
● Connect AC plug adapter and power cord to the monitor in the order of 
numbers below. 
● Insert the power terminal firmly until you hear a clicking sound.
AC adapter
Power cable
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							09
Parts identification
Parts identification
 Main  unit
 Power indicator Lights while the monitor is on.
 Remote sensor Aim the remote control here.
Turns the monitor on/off (on standby).
INPUTSwitches the input.
MENU 
Opens the setting menu. Functions as the down cursor 
key in the menu operations.
Functions as the left cursor key and the right cursor key 
in the menu operations.
+ OKTurns up the volume. Functions as the OK key in the 
menu operations.
– BACKTurns down the volume. Functions as the BACK key in 
the menu operations.
Power indicator
Remote sensorSpeaker unit
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							10
Remote control
POWERTurns the monitor on/off (on 
standby).
LINKOpens the photo viewer menu or 
the operation window for HDMI 
CEC devices. (➔ page 11)
 OPTIONOpens the setup window of HDMI 
CEC devices.
Opens the setting menu of the 
photo viewer (➔ page 38).
MENUOpens the setting menu.
(➔ page 12)
EXIT
Exits from the menu.
 
(Cursor keys)Selects an item.
OK
Confirms your selection.
BACK
Goes back to the previous screen.
 ASPECT
Changes the aspect. (➔ page 28)
BLUE
Press accordingly to the on-screen 
indications. RED
GREEN
YELLOW
VOL +/–
Adjusts the volume.
MUTINGAttenuates the sound.
INPUT 1
Switches the input. INPUT 2
INPUT 3
INPUT 4
● Buttons not mentioned above are equipped for the 
operations of a TV tuner.
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							 Rec.
 Rec.Stop
 NAVIGATION
 Function
Operation Panel
Speaker Device
Operate
Select ExitInput-1
Monitor Link >Recorder
11
Controlling HDMI devices
Controlling HDMI devices
You can control HDMI CEC devices connected to this monitor using the 
remote of the monitor.
● This function can be customized in the “ HDMI ” settings (➔ page 34).
● Devices may not operate or may function differently from described, 
depending on the model or the manufacturer.
 1  Press the [LINK] button.
Operation window appears.
2  Select the device to control.
Select the device name under “Device”.
3  Control the selected HDMI device.
● “ Rec. ” : Starts recording.
● ” Rec.Stop ” : Stops recording.
● “ NAVIGATION ” : Opens the playback menu of the HDMI device.
● “ Function ” : Opens the operation menu of the HDMI device.
● “ Operation Panel ” : Opens the operation panel.
To select the audio output
When an HDMI CEC amplifier is connected to the monitor, you can select 
either the monitor or the amplifier as the device to output the sound 
signal.
● To output the sound from the amplifier, set “ AMP Control ” (➔ page 35) to “ On ”, 
and connect the audio output terminals of the player into the amplifier.
1  Press the [LINK] button.
2  Select “ Monitor ” or “ AMP ” under “ Speaker ”.
● “ Monitor ” : The sound is output from the speakers when you connect the 
speaker unit (sold separatery) to the monitor. The volume buttons of the 
monitor control the volume of the speakers.
● “ AMP ” : The sound is output from the amplifier. The volume buttons of the 
monitor control the volume of the amplifier.
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							 Memory Setting 
Load Preset
Tint
Tint Setting
Color
Contrast
Contrast Setting
Brightness
SharpnessPicture
Memory1
0Page 1/3
0
0
0
0
12
Changing the settings
Example: to change the setting of “ Color Temperature ”
 1  Open the menu.
2  Select  “ Picture ”.
3  Select “ Color Temperature ”.
● The item currently selected is shown in orange.
4  Select the setting you want.
● When the selected item is followed by an adjustment screen, press the 
[
] buttons to make adjustments.
 5  Finish the setting.
 Picture ➔ page 13
 Sound 
➔ page 25
 Setup 
➔ page 27
 HDMI 
➔ page 34
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							Show Your True Colors.
Technical information
Adjust the picture to your needs  A-2
Set up the monitor for your PC  A-10
Enjoy SLR digital camera photographs
 A-11
Menu index by task  A-12
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.