JVC Lt 32wx50 Instructions

							 Memory Setting 
Load Preset
Tint
Tint Setting
Color
Contrast
Contrast Setting
Brightness
SharpnessPicture
Memory1
0Page 1/3
0
0
0
0
To use a preset
1  Open the menu.
2  Select a memory from “ Setting Memory ” in “ Picture ”.
In the initial setting, 6 presets are assigned to each memory as follows:
● Memory1 : Standard
● Memory2 : Dynamic
● Memory3 : Theater
● Memory4 : Monitor
● Memory5 : Photo Pro
● Memory6 : Game
● See page A-4 for the detail of 
each preset.
● If you have modified the settings 
(
➔ next page), the settings of 
each memory are different from the default.
● When the input is changed, the memory used for the input last time is 
automatically applied.
Adjust the picture to your 
needs
A-2
-589@@@QJDUVSFJOEE


-589@@@QJDUVSFJOEE






1.



1.
 
						

							Adjust the picture to your needs
To customize the settings
You can create your own set of picture settings by arranging the settings of 
a preset. Storing several sets of settings helps you to enjoy a picture in the 
taste you like according to the viewing environment and characteristics of 
the source.
1  Open the menu.
2  Select the memory you want to adjust from “  Memory 
Setting  ” in “ Picture ”.
3  Adjust items in “ Picture ”.
➔ See pages 14 and later for the detail of menu items.
● It is recommended to use the preset of “ Standard ” as the base of your 
adjustment.
● Adjustments are stored into the selected memory as you change the settings.
● To make another set of picture settings, select another memory in step 2 
above and start adjustments.
To reset the settings
If you do not like your current adjustments, load either of the preset settings 
into the memory which you want to reset. Settings of the selected memory 
are overwritten by those of the loaded preset setting.
1  Open the menu.
2  Select the memory you want to reset from “  Memory Setting  ” in 
“ Picture ”.
3  Select “ Load Preset ”, select one of the preset settings, and press 
“ Load ”. This monitor features rich menus for picture control, in addition to 10 pre-
installed sets of picture settings carefully prepared by JVC to suit various 
types of video content and viewing environment.
Enjoy controlling appearance of pictures using the “ Picture ” menu, and 
create your own picture settings.
A-3
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							● Special settings
 Standard 
The most standard setting.
● Characteristics of the 10 presets
 CCTV  HD 
Suitable for monitoring CCTVs 
in HD format.
 Signage 
Suitable for digital signage use in 
market, shops or hotels.
 Dynamic 
Makes pictures colorful and 
bright, suitable for watching in a 
well-light room.
 Theater 
Suitable for watching cinemas in 
a dark room.
A-4
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							 Game 
Gives priority to the response 
time for picture movement.
Suitable for game consoles.
Adjust the picture to your needs
 Option 
Suitable for displaying medical 
images including x-ray pictures.
● This setting is only for approximate 
presentation and does not conform 
to any official standard of medical 
imaging.
➔ See the following pages for the setting values of each preset.
 CCTV  SD 
Suitable for monitoring CCTVs 
in SD format.
 Monitor 
Does not apply color adjustments 
or noise reductions.Input video 
signals are displayed as they are. 
Suitable for monitoring purpose.
 Photo  Pro 
 Suitable for watching still 
pictures of SLR digital cameras.
A-5
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							● Setting values of each preset
● The settings are subject to change for amelioration.
 Dynamic   Standard   Theater   Monitor 
 Tint 0000
 Tint  Setting 
 BY  Gain 
0000
 BY/RY  Angle 
0 +2+30
 Color 
+8 +4 +2 0
 Contrast 
+3000
 Contrast  Setting 
 Black  Stretch   High   Medium   Off   Off 
 Dynamic  DC 
Offset  On   On   On   Off 
 Auto  Contrast   On   Off   Off   Off 
 Brightness 
00+20
 Sharpness 
+10 0 0 –30
 Enhancer   Mode-2   Mode-2   Mode-3   Mode-3 
 Enhancer  Setting 
 Detail 
0–500
 H.Sharp 
+10 +5 +10 0
 V.Sharp 
+10 +5 +5 0
 Backlight 
+30 +5 –5 0
 Backlight  Setting 
 Smart  Picture   Off   On   On   Off 
 Dynamic  Backlight   High   Medium   Low   Off 
 Color  System   Auto   Auto   Auto   Auto 
 Color  Matrix   Auto   Auto   Auto   Auto 
 Color  Space   Auto   Auto   Normal   Normal 
 Color  Temperature   Mode-2   Mode-3   Mode-5   Mode-5 
A-6
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							Adjust the picture to your needs
 Photo  Pro   Game   Signage   CCTV  HD   CCTV  SD   Option 
000000
000000
000000
0 0 +5 +8 +14 0
0 0 0 +4+50
 Off   Off   Medium   High   High   Off 
 Off   Off   Off   Off   Off   Off 
 Off   Off   On   On   On   Off 
0000–4+2
0 –15 –10 20 20 –30
 Mode-3   Mode-3   Mode-3   Mode-1   Mode-1   Mode-3 
–1500000
–5000+50
–15 0 –15 0 –5 0
+5 +10 +30 +30 +30 +18
 Off   On   Off   Off   Off   Off 
 Off   Off   Medium   Medium   Medium   Off 
 Auto   Auto   Auto   Auto   Auto   Auto 
 Auto   Auto   Auto   Auto   Auto   Auto 
 sRGB   Auto   Wide   Wide   Wide   Normal 
 Mode-5   Mode-2   Mode-2   Mode-3   Mode-3   Mode-4 
A-7
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							 Dynamic   Standard   Theater   Monitor 
 White Balance Setting 
 R Drive  /  G Drive  / 
 B  Drive 0000
 R Cutoff  /  G Cutoff  / 
 B  Cutoff 0000
 Color  Management   Mode-1   Mode-2   Mode-3   Off 
 Color Mngmt. Setting 
 Red Tint  /  Red 
Color 0000
 Yellow  Tint   / 
 Yellow  Color 0000
 Green Tint  /  Green 
Color 0000
 Cyan Tint  /  Cyan 
Color 0000
 Skin Tint  /  Skin 
Color 0000
 Color : Bright Area  0 0 0 0
 Color : Dark Area  0 0 0 0
 Gamma   Mode-2   Mode-2   Mode-3   Mode-3 
 Dynamic  Gamma   High   Medium   Low   Off 
 Noise  Reduction 
 Digital  VNR   Auto   Auto   Auto   Off 
 MPEG  NR   Low   Low   Low   Off 
 3DY/C   On   On   On   Off 
 Natural  Cinema   Auto   Auto   Auto   Off 
 Picture  Delay  Time   Normal   Normal   Normal   Normal 
 PC  Monitor  Mode   Off   Off   Off   Off 
 Eco  Mode   Off   Off   Off   Off 
 Other 
 Real  Bit  Driver   On   On   On   Off 
 100/120Hz  CMD   On   On   On   Off 
A-8
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							Adjust the picture to your needs
 Photo  Pro   Game   Signage   CCTV  HD   CCTV  SD   Option 
000000
000000
 Off   Mode-2   Mode-1   Mode-2   Mode-1   Off 
000000
000000
000000
000000
000000
000000
000000
 Mode-3   Mode-2   Mode-3   Mode-4   Mode-2   Mode-6 
 Off   Medium   Medium   Medium   High   Off 
 Auto   Auto   Auto   Auto   Auto   Off 
 Off   Low   Low   Low   Low   Off 
 On   On   On   On   On   Off 
 Off   Off   Off   Off   Off   Off 
 Normal   Middle   Normal   Normal   Normal   Short 
 Off   Off   Off   Off   Off   Off 
 Off   Off   Off   Off   Off   Off 
 On   On   On   On   On   Off 
 Off   On   Off   On   On   Off 
A-9
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							Set up the monitor for your 
PC
Selecting the input signal
When you connect a PC to the INPUT-3 terminal, set the type of the input 
signal accordingly.
● For signals in VGA60 and XGA60
Set “ Sampling Mode ” to “ Std ”. (➔ page 32)
● For signals in WVGA60
Set “ Sampling Mode ” to “ Wide ”. (➔ page 32)
● For signals in WXGA (1280), WXGA (1360) and WXGA60
1  Set “ Sampling Mode ” to “ Wide ”. (➔ page 32)
2  Set “ WXGA Select ” as follows. (➔ page 32)
● For signals in WXGA (1280): “ 1280*768 ”
● For signals in WXGA (1360): “ 1360*768 ”
● For signals in WXGA60: “ 1366*768 ”
● For signals in SXGA60
Set “ SXGA / SXGA+ ” to “ SXGA ”. (➔ page 32)
● For signals in SXGA+60
Set “ SXGA / SXGA+ ” to “ SXGA+ ”. (➔ page 32)
A-10
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 
						

							Enjoy SLR digital camera 
photographs
When you select the picture preset of “ Photo Pro ” in “  Memory Setting  ”, you 
can view the photographs just the way they were taken.
You can also view photographs on an SD card or USB device using Photo 
viewer. (➔ page 36) If the picture is not aligned vertically, or letters on the screen look 
blurred
Set the aspect to “ 1:1 ”, and adjust “ Dot Clock ” and “ Clock Phase ”. (➔ page 
33)
● For signals in 1920 x 1080, set the aspect to “ Full ” and adjust the same items.
If the picture is cropped, or extra margins are displayed around it
1  Set the aspect to “ Full ”.
2  Adjust the position of the picture using “ PC Position Adjustment ” 
until the upper left corner of the picture is positioned at the upper 
left corner of the display.
3  Adjust the size of the picture using “ H Size ” and “ V Size ” until the 
bottom right corner of the picture is positioned at the bottom right 
corner of the display.
For JPEG pictures, select “ sRGB ” or “ AdobeRGB ” under the setting of “ Color 
Space ”  (➔ page 18) according to the setting of your camera, so that the 
photographs are displayed more faithfully to the original.
● It is recommended not to modify the settings of “ Photo Pro ”. In the initial 
setting of “ Photo Pro ”, “ Color Space ” is set to “ sRGB ”.
A-11
Set up the monitor for your PC
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.