JVC Lt 32wx50 Instructions

 Memory Setting 
Load Preset
Tint
Tint Setting
Color
Contrast
Contrast Setting
Brightness
SharpnessPicture
Memory1
0Page 1/3
0
0
0
0
To use a preset
1  Open the menu.
2  Select a memory from “ Setting Memory ” in “ Picture ”.
In the initial setting, 6 presets are assigned to each memory as follows:
● Memory1 : Standard
● Memory2 : Dynamic
● Memory3 : Theater
● Memory4 : Monitor
● Memory5 : Photo Pro
● Memory6 : Game
● See page A-4 for the detail of 
each preset.
● If you have modified the settings 
(
➔...

Adjust the picture to your needs
To customize the settings
You can create your own set of picture settings by arranging the settings of 
a preset. Storing several sets of settings helps you to enjoy a picture in the 
taste you like according to the viewing environment and characteristics of 
the source.
1  Open the menu.
2  Select the memory you want to adjust from “  Memory 
Setting  ” in “ Picture ”.
3  Adjust items in “ Picture ”.
➔ See pages 14 and later for the detail of menu items.
● It is...

● Special settings
 Standard 
The most standard setting.
● Characteristics of the 10 presets
 CCTV  HD 
Suitable for monitoring CCTVs 
in HD format.
 Signage 
Suitable for digital signage use in 
market, shops or hotels.
 Dynamic 
Makes pictures colorful and 
bright, suitable for watching in a 
well-light room.
 Theater 
Suitable for watching cinemas in 
a dark room.
A-4
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 

 Game 
Gives priority to the response 
time for picture movement.
Suitable for game consoles.
Adjust the picture to your needs
 Option 
Suitable for displaying medical 
images including x-ray pictures.
● This setting is only for approximate 
presentation and does not conform 
to any official standard of medical 
imaging.
➔ See the following pages for the setting values of each preset.
 CCTV  SD 
Suitable for monitoring CCTVs 
in SD format.
 Monitor 
Does not apply color adjustments 
or noise...

● Setting values of each preset
● The settings are subject to change for amelioration.
 Dynamic   Standard   Theater   Monitor 
 Tint 0000
 Tint  Setting 
 BY  Gain 
0000
 BY/RY  Angle 
0 +2+30
 Color 
+8 +4 +2 0
 Contrast 
+3000
 Contrast  Setting 
 Black  Stretch   High   Medium   Off   Off 
 Dynamic  DC 
Offset  On   On   On   Off 
 Auto  Contrast   On   Off   Off   Off 
 Brightness 
00+20
 Sharpness 
+10 0 0 –30
 Enhancer   Mode-2   Mode-2   Mode-3   Mode-3 
 Enhancer  Setting 
 Detail 
0–500...

Adjust the picture to your needs
 Photo  Pro   Game   Signage   CCTV  HD   CCTV  SD   Option 
000000
000000
000000
0 0 +5 +8 +14 0
0 0 0 +4+50
 Off   Off   Medium   High   High   Off 
 Off   Off   Off   Off   Off   Off 
 Off   Off   On   On   On   Off 
0000–4+2
0 –15 –10 20 20 –30
 Mode-3   Mode-3   Mode-3   Mode-1   Mode-1   Mode-3 
–1500000
–5000+50
–15 0 –15 0 –5 0
+5 +10 +30 +30 +30 +18
 Off   On   Off   Off   Off   Off 
 Off   Off   Medium   Medium   Medium   Off 
 Auto   Auto   Auto   Auto   Auto...

 Dynamic   Standard   Theater   Monitor 
 White Balance Setting 
 R Drive  /  G Drive  / 
 B  Drive 0000
 R Cutoff  /  G Cutoff  / 
 B  Cutoff 0000
 Color  Management   Mode-1   Mode-2   Mode-3   Off 
 Color Mngmt. Setting 
 Red Tint  /  Red 
Color 0000
 Yellow  Tint   / 
 Yellow  Color 0000
 Green Tint  /  Green 
Color 0000
 Cyan Tint  /  Cyan 
Color 0000
 Skin Tint  /  Skin 
Color 0000
 Color : Bright Area  0 0 0 0
 Color : Dark Area  0 0 0 0
 Gamma   Mode-2   Mode-2   Mode-3   Mode-3 
 Dynamic  Gamma...

Adjust the picture to your needs
 Photo  Pro   Game   Signage   CCTV  HD   CCTV  SD   Option 
000000
000000
 Off   Mode-2   Mode-1   Mode-2   Mode-1   Off 
000000
000000
000000
000000
000000
000000
000000
 Mode-3   Mode-2   Mode-3   Mode-4   Mode-2   Mode-6 
 Off   Medium   Medium   Medium   High   Off 
 Auto   Auto   Auto   Auto   Auto   Off 
 Off   Low   Low   Low   Low   Off 
 On   On   On   On   On   Off 
 Off   Off   Off   Off   Off   Off 
 Normal   Middle   Normal   Normal   Normal   Short 
 Off...

Set up the monitor for your 
PC
Selecting the input signal
When you connect a PC to the INPUT-3 terminal, set the type of the input 
signal accordingly.
● For signals in VGA60 and XGA60
Set “ Sampling Mode ” to “ Std ”. (➔ page 32)
● For signals in WVGA60
Set “ Sampling Mode ” to “ Wide ”. (➔ page 32)
● For signals in WXGA (1280), WXGA (1360) and WXGA60
1  Set “ Sampling Mode ” to “ Wide ”. (➔ page 32)
2  Set “ WXGA Select ” as follows. (➔ page 32)
● For signals in WXGA (1280): “ 1280*768 ”
● For signals...

Enjoy SLR digital camera 
photographs
When you select the picture preset of “ Photo Pro ” in “  Memory Setting  ”, you 
can view the photographs just the way they were taken.
You can also view photographs on an SD card or USB device using Photo 
viewer. (➔ page 36) If the picture is not aligned vertically, or letters on the screen look 
blurred
Set the aspect to “ 1:1 ”, and adjust “ Dot Clock ” and “ Clock Phase ”. (➔ page 
33)
● For signals in 1920 x 1080, set the aspect to “ Full ” and adjust the same...