JVC Lt 32wx50 Instructions

04
 Inserting batteries into the remote control
When replacing the batteries
To avoid short-circuit, place the minus 
end of the batteries first.
● Batteries shall not be exposed to 
excessive heat such as direct sunshine, fire or the like.
● Read the precautions on the battery.
● The batteries last about 6 to 12 months on regular usage.
● The included batteries are supplied for operation check and may last shorter.
● Main unit (monitor)
● Speaker  unit
● Stand
● VESA  bracket
● M4 x 8 screws (for the...

05
Installation
Attaching the covers
● Attach the HDMI cover (3) and AC terminal cover (5) after connections have 
been made. Fix the HDMI cover to the unit using the supplied screw. Break off 
the bottom right of the HDMI cover when you want to extend the HDMI cable 
backwards.
● Attach the D-sub cover (1), hook hole covers (2) and bottom covers (4) when 
the respective openings are not in use.
Attaching the speaker unit
Connect the speaker unit to the monitor if you do not connect any other 
external...

06
 Connecting external devices
 To connect a computer  To connect a device with a composite terminal  To connect a device with component terminals
To INPUT-1/INPUT-2 
terminals Green
 To connect a DVI device
To connect an HDMI deviceø 3.5 mm stereo 
mini plug
To INPUT-1 terminal
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.
 

07
Installation
INPUT-1: HDMITM 
terminal
INPUT-2: HDMITM terminal
INPUT-3: 
D-sub 15 pin
INPUT-4 :
SD card slot,
USB type slot
(➔ page 36)
AUDIO IN terminal : 
3.5 mm stereo mini 
jack
RS-232C 
terminal
(➔ page 40)
A: Video cable (supplied)
B: Audio cable (supplied)
C: Video cable (supplied)
D: RS-232C extension cable (supplied)
a: Component cable (sold separately)
b: Audio cable (sold separately)
c: Video cable (sold separately)d: VGA cable (sold separately)
e: Audio cable (sold separately)
f: DVI-HDMI...

Menu LanguageInteractive Plug-in Menu
English(EU)
SetPrevious 2/4
English(US)
Suomi
Français(EU)
Français(US)
Deutsch
Ελληνιά
Magyar
Next English(EU)
08
 Connecting the power cable/AC Adapter
● Ground the earth plug of the power cable to the earth terminal of the AC 
outlet.
Initial settings
When you turn on the monitor for the first time, initial settings start. Select 
the menu language and the place of installation.
1  Select the menu language.
1-1  Select “ Menu Language ” and press 
the [OK]...

09
Parts identification
Parts identification
 Main  unit
 Power indicator Lights while the monitor is on.
 Remote sensor Aim the remote control here.
Turns the monitor on/off (on standby).
INPUTSwitches the input.
MENU 
Opens the setting menu. Functions as the down cursor 
key in the menu operations.
Functions as the left cursor key and the right cursor key 
in the menu operations.
+ OKTurns up the volume. Functions as the OK key in the 
menu operations.
– BACKTurns down the volume. Functions as the BACK...

10
Remote control
POWERTurns the monitor on/off (on 
standby).
LINKOpens the photo viewer menu or 
the operation window for HDMI 
CEC devices. (➔ page 11)
 OPTIONOpens the setup window of HDMI 
CEC devices.
Opens the setting menu of the 
photo viewer (➔ page 38).
MENUOpens the setting menu.
(➔ page 12)
EXIT
Exits from the menu.
 
(Cursor keys)Selects an item.
OK
Confirms your selection.
BACK
Goes back to the previous screen.
 ASPECT
Changes the aspect. (➔ page 28)
BLUE
Press accordingly to the on-screen...

 Rec.
 Rec.Stop
 NAVIGATION
 Function
Operation Panel
Speaker Device
Operate
Select ExitInput-1
Monitor Link >Recorder
11
Controlling HDMI devices
Controlling HDMI devices
You can control HDMI CEC devices connected to this monitor using the 
remote of the monitor.
● This function can be customized in the “ HDMI ” settings (➔ page 34).
● Devices may not operate or may function differently from described, 
depending on the model or the manufacturer.
 1  Press the [LINK] button.
Operation window appears.
2...

 Memory Setting 
Load Preset
Tint
Tint Setting
Color
Contrast
Contrast Setting
Brightness
SharpnessPicture
Memory1
0Page 1/3
0
0
0
0
12
Changing the settings
Example: to change the setting of “ Color Temperature ”
 1  Open the menu.
2  Select  “ Picture ”.
3  Select “ Color Temperature ”.
● The item currently selected is shown in orange.
4  Select the setting you want.
● When the selected item is followed by an adjustment screen, press the 
[
] buttons to make adjustments.
 5  Finish the setting....

Show Your True Colors.
Technical information
Adjust the picture to your needs  A-2
Set up the monitor for your PC  A-10
Enjoy SLR digital camera photographs
 A-11
Menu index by task  A-12
-589@@VT@FOJOEC


-589@@VT@FOJOEC






.



.