JVC Kd-r331 Instruction Manual
Have a look at the manual JVC Kd-r331 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ENGLISH FRANÇAIS GET0758-003A[E/EU] EN, FR 0811DTSMDTJEIN© 2011 JVC KENWOOD Corporation KD-R332/KD-R331 CD RECEIVER / RÉCEPTEUR CD For canceling the display demonstration, see page 4. / Pour annuler la d\ émonstration des affichages, référez-vous à la page 4. INSTRUCTIONSMANUEL D’INSTRUCTIONS For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel \ séparé. Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser vo\ tre appareil CoverRear_KD-R332_003A_f.indd 1-2 CoverRear_KD-R332_003A_f.indd 1-29/7/11 10:39:39 AM 9/7/11 10:39:39 AM
2ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your \ complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside th\ e unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view\ directly with optical instruments. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT. WARNING: Stop the car before operating the unit. Caution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident. Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. Caution for DualDisc playback: The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended. Information for Users on Disposal of Old Equipment and Batteries [European Union only] These symbols indicate that the product and the battery with this symbol should not be disposed as general household waste at its end-of-life. If you wish to dispose of this product and the battery, please do so in accordance with applicable national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead. Products Battery EN02-15_KD-R332_003A_f.indd 2 EN02-15_KD-R332_003A_f.indd 2 9/7/11 10:40:02 AM 9/7/11 10:40:02 AM
3ENGLISH How to attach/detach the control panel How to reset your unit Your preset adjustments will also be erased. How to forcibly eject a disc • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit. CONTENTS 3 How to attach/detach the control panel 3 How to reset your unit 3 How to forcibly eject a disc 3 About discs 4 Canceling the display demonstration 4 Setting the clock 5 Basic operations 6 Listening to the radio 8 Listening to a disc 9 Connecting the other external components 9 Listening to the other external components 10 Selecting a preset sound mode 10 Menu operations 13 Troubleshooting 14 Using Bluetooth ® devices 15 Specifications 15 Maintenance Condensation : When the car is air- conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate. Temperature inside the car : If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. [Hold] About discs This unit can only play the CDs with: Discs that cannot be used: • Discs that are not round. • Discs with coloring on the recording surface or discs that are dirty. • You cannot play a Recordable/ReWritable disc that has not been finalized. (For the finalization process refer to your disc writing software, and your disc recorder instruction manual.) • 8 cm CD cannot be used. Attempt to insert using an adapter can cause malfunction. Handling discs: • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use any accessories for the disc. • Clean from the center of the disc and move outward. • Clean the disc with a dry silicon or soft cloth. Do not use any solvents. • When removing discs from this unit, pull them out horizontally. • Remove the rims from the center hole and disc edge before inserting a disc. EN02-15_KD-R332_003A_f.indd 3 EN02-15_KD-R332_003A_f.indd 3 9/7/11 10:40:03 AM 9/7/11 10:40:03 AM
4ENGLISH 1 Turn on the power. 2 3 1 Turn on the power. 2 3 Select . 4 Select . 5 Adjust the hour. 4 Select . 5 6 Finish the procedure. Canceling the display demonstration (Initial setting) (Initial setting) [Hold][Hold] (Initial setting) (Initial setting) [Hold] [Hold] 6 Adjust the minute. 7 Select . 8 Select or . 9 Finish the procedure. Setting the clock EN02-15_KD-R332_003A_f.indd 4 EN02-15_KD-R332_003A_f.indd 4 9/7/11 10:40:03 AM 9/7/11 10:40:03 AM
5ENGLISH Basic operations Control dialEjects the disc Loading slot Display window Front auxiliary input jack Detaches the panel When you press or hold the following button(s)... Button General operation / SOURCE• Turns on/off [Hold]. • Selects the sources (FM, CD, F-AUX, BT AUDIO or R-AUX or BT PHONE, AM)\ . “CD” is selectable only when a disc is loaded. Control dial (turn) • Adjusts the volume level. • Selects items. Control dial (press) • Mutes the sound while listening to a source. If the source is “CD,”\ playback pauses. Press the control dial again to cancel muting or resume playback\ . • Confirms selection. EQ • Selects the sound mode. • Enters tone level adjustment directly [Hold]. (page 10) Number buttons (1 – 6) • Selects preset stations. • Stores the current station into the selected number button [Hold]. • Press number button 1 ( ) or 2 () to enter REPEAT/RANDOM setting directly. (page 8) Enters menu directly. (page 11) T/P • Activates/deactivates TA Standby Reception. • Enters PTY Searching mode [Hold]. • Returns to the previous menu. • Exit from the menu [Hold]. DISP • Changes the display information. • Scrolls the display information [Hold]. EN02-15_KD-R332_003A_f.indd 5 EN02-15_KD-R332_003A_f.indd 5 9/7/11 10:40:04 AM 9/7/11 10:40:04 AM
6ENGLISH Improving the FM reception 1 2 ] ] ] Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure to select . Automatic presetting (FM)— SSM (Strong-station Sequential Memory) You can preset up to 18 stations for FM. While listening to a station... 1 2 ] ] ] “SSM” flashes and local stations with the strongest signal are searched and stored automatically. To preset another 6 stations, repeat the above procedure by selecting one of the other SSM setting ranges. Changing the display information (for non- Radio Data System station) Frequency j Clock Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. 1 ] Tune in to a station you want to preset. 2 “PRESET MODE” flashes. 3 ] Selects preset number. Preset number flashes and “MEMORY” appears. • Pressing and holding the number buttons (1 – 6) can also store the current station to the selected number buttons (1 – 6). Selecting a preset station or 1 2 • Pressing the number buttons (1 – 6) can also select the preset stations (1 – 6). Listening to the radio [Hold] [Hold] ~ ] “FM” or “AM” Ÿ• [Press] Searches for stations automatically. • [Hold] Searches for stations manually. “M” flashes, then press the button repeatedly. “ST” lights up when receiving an FM stereo broadcast with sufficie\ nt signal strength. [Hold] EN02-15_KD-R332_003A_f.indd 6 EN02-15_KD-R332_003A_f.indd 6 9/7/11 10:40:04 AM 9/7/11 10:40:04 AM
7ENGLISH The following features are available only for FM Radio Data System stations. Searching for your favourite FM Radio Data System programme— PTY Search You can tune in to a station broadcasting your favourite programme by searching for a PTY code. 1 The last selected PTY code appears. 2 ] Select one of your favourite programme types or a PTY code, and start searching. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. PTY codes: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. • If the volume is adjusted during reception of traffic announcement, the adjusted volume is memorized automatically. It will be applied the next time Traffic Announcement function is turned on. To activate TA Standby Reception If the TP indicator lights up, TA Standby Reception is activated. If the TP indicator flashes, TA Standby Reception is not yet activated. • To activate the reception, tune in to another station providing Radio Data System signals required for TA Standby Reception. • To deactivate the reception, press T/P again. NEWS Standby Reception NEWS Standby Reception allows the unit to switch temporarily to your NEWS programme from any source other than AM. To activate NEWS Standby Reception, see . (page 12) Tracing the same programme—Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same programme with stronger signals. To change the Network-Tracking Reception setting, see . (page 12) Automatic station selection—Programme Search Usually when you select a preset number, the station preset in that number is tuned in. If the signals from the FM Radio Data System preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency possibly broadcasting the same programme as the original preset station is broadcasting. To activate Programme Search, see . (page 12) Changing the display information Station name (PS) = Station Frequency = Programme type (PTY) = Clock = (back to the beginning) [Hold] EN02-15_KD-R332_003A_f.indd 7 EN02-15_KD-R332_003A_f.indd 7 9/7/11 10:40:05 AM 9/7/11 10:40:05 AM
8ENGLISH Stopping playback and ejecting the disc If the ejected disc is not removed within 15 seconds, it is automatically inserted into the loading slot. Selecting a track/folder Selects folder of the MP3/WMA [Press] Selects track. [Hold] Fast-forwards or reverses the track. Changing the display information Disc title/Album name/performer (folder name)* = Track title (file name)* = Current track number with the elapsed playing time = Current track number with the clock time = (back to the beginning) * “NO NAME” appears for conventional CDs or if not recorded. Selecting a track/folder from the list • If the MP3/WMA disc contains many tracks, you can fast search (±10, ±100) through the disc by turning the control dial quickly. • To return to the previous menu, press T/P . Selecting the playback modes You can use only one of the following playback modes at a time. 1 • Pressing number button 1 () or 2 () can enter REPEAT/RANDOM setting directly. Then, perform step 3. 2 ] “REPEAT” j “RANDOM” 3 REPEAT TRACK RPT : Repeats current track FOLDER RPT : Repeats current folder RANDOM FOLDER RND : Randomly plays all tracks of current folder, then tracks of next folders ALL RND : Randomly plays all tracks To cancel repeat play or random play, select “RPT OFF” or “RND OFF.” Listening to a disc [Hold] ~ ] “CD” ŸPlayback starts automatically. All tracks will be played repeatedly until you change the source or eject the disc. EN02-15_KD-R332_003A_f.indd 8 EN02-15_KD-R332_003A_f.indd 8 9/7/11 10:40:05 AM 9/7/11 10:40:05 AM
9ENGLISH Connecting the other external components Listening to the other external components 3.5 mm stereo mini plug (with “L” shaped connector) (not supplied) You can connect an external component to the auxiliary input jack on the\ control panel (F-AUX) and/or on the rear side of the unit (R-AUX). Summary of using the external components through the auxiliary input jac\ ks: External component Auxiliary input jack Preparation Source name Connecting cable/device (not supplied) Menu setting item Sub- item Setting Portable audio player Front SRC SELECT F-AUX ON F-AUX See below. Rear SRC SELECT R-AUX ON R-AUX Bluetooth device Rear SRC SELECT R-AUX BT ADAPTER BT AUDIO/ BT PHONE *KS-BTA100 (page 14) * ”BT PHONE” appears when a Bluetooth phone is in use. For details, refer also to the instructions supplied with the external c\ omponents. ~ ] “F-AUX” or “R-AUX” ŸTurn on the connected component and start playing the source. On the control panel (F-AUX):On the rear panel (R-AUX): Portable audio player, etc. Portable audio player, etc. 3.5 mm stereo mini plug (not supplied) Recommended to use a 3-terminal plug head stereo mini plug for optimum audio output. EN02-15_KD-R332_003A_f.indd 9 EN02-15_KD-R332_003A_f.indd 9 9/7/11 10:40:05 AM 9/7/11 10:40:05 AM
10ENGLISH You can select a preset sound mode suitable for the music genre. FLAT = NATURAL = DYNAMIC = VOCAL BOOST = BASS BOOST = USER = (back to the beginning) While listening, you can adjust the subwoofer level and tone level of the selected sound mode. 1 2 Adjust the level: SUB.W *: 00 to 08 BASS/ MID/ TRE: –06 to +06 The sound mode is automatically stored and changed to “USER.” * Subwoofer level is adjustable only when is set to . (page 11) Storing your own sound modeYou can store your own adjustments in memory. 1 Menu operations 1 If no operation is done for about 60 seconds, the operation will be canceled. 23Repeat step 2 if necessary. • To return to the previous menu, press T/P . • To exit from the menu, press MENU. Menu itemSelectable setting, [Initial: Underlined] DEMO ON : Display demonstration will be activated automatically if no operation\ is done for about 20 seconds. / OFF : Cancels. (page 4) CLOCK CLOCK SETFor settings, see page 4. 24H/12HFor settings, see page 4. CLOCK ADJ *1AUTO : The built-in clock is automatically adjusted using the CT (clock tim\ e) data in the Radio Data System signal. / OFF : Cancels. *1 Takes effect only when CT (clock time) data is received. [Hold] [Hold] [Hold] Selecting a preset sound mode 2 ] ] 3 Adjust the sound elements of the selected tone. BASS [Initial: 80 Hz, 00, Q1.0] Frequency: 60/ 80/ 100/ 200 Hz Level: –06 to +06 Q: Q1.0/ 1.25/ 1.5/ 2.0 MIDDLE [Initial: 1.0 kHz, 00, Q1.25] Frequency: 0.5/ 1.0/ 1.5/ 2.5 kHz Level: –06 to +06 Q: Q0.75/ 1.0/ 1.25 TREBLE [Initial: 10.0 kHz, 00, Q FIX] Frequency: 10.0/ 12.5/ 15.0/ 17.5 kHz Level: –06 to +06 Q: Q FIX 4Repeat steps 2 and 3 to adjust other tones. The adjustments made is automatically stored and changed to “USER.” EN02-15_KD-R332_003A_f.indd 10 EN02-15_KD-R332_003A_f.indd 10 9/7/11 10:40:05 AM 9/7/11 10:40:05 AM