JVC Haw600rf Owners Manual
Here you can view all the pages of manual JVC Haw600rf Owners Manual. The JVC manuals for Headphones are available online for free. You can easily download all the documents as PDF.
Page 41
3445 Parts identification 123 45 6 Base station (transmitter and battery charging unit) Back side 23167 Headphones 1 CHARGE indicator (6) 2 POWER indicator (7) 3 Battery charging terminal (6) See pages in parentheses for details. 4 CHANNEL selector (8) 5 AUDIO IN jack (4) 6 DC IN jack (4) LeftRight 1 AUTO SCAN button (7, 8) 2 AUTO SCAN indicator (7) 3 VOL (volume) (7) 4 Ear pad (5) 5 Battery charging terminal (6) 6 POWER button (6, 7) 7 POWER indicator (6, 7) HAW600RF_B.indb...
Page 42
4 Connection TV, audio amplifier, VCR, DVD player, PC, etc. 1 Connect the base station to the AV equipment. 2 Connect the AC adaptor to the base station. 3 Connect the AC adaptor to the AC outlet. 112 3 To AC outlet (AC 230 V, 50 Hz) Conversion cord for stereo pin jack (supplied)Connection cord (supplied) Plug adaptor for 6.3 mm Phono jack (supplied) Plug adaptor for monaural mini jack (not supplied) To stereo mini jack Note: Do not use any other AC adaptor than the supplied AC adaptor....
Page 43
5 1 Take off the ear pad of the right headphone. 2 Take off the battery covers. 3 Install the batteries. Match the polarity (+ and –) on the batteries with the + and – marking on the battery compartments. • Insert the – terminal of the battery at first. Be sure to use the supplied exclusive battery. Do not use any other rechargeable or dry cell battery, which may cause malfunctions or damage the unit. Battery installation 4 Put on the battery covers. 5 Put on the ear pad. 1 Insert the...
Page 44
6 Charging the battery The base station works as the battery charging unit. Charge the rechargeable battery before starting to use the headphones. You can continuously use the headphones for about 10 hours after full battery charge. 1 Make sure that the headphones are turned off. You cannot charge the battery of the headphones when the headphones are turned on. Press POWER to turn the Power indicator off. 2 Put on the headphones on the base station so that their charging terminals contact...
Page 45
7 Basic operations Listening to the sound from the base station The base station works as the FM transmitter and send sound to the headphones. Precaution Turn down the volume of the headphones with the VOL dial before turning on its power to avoid excessive volume. 1 Start playback on the AV equipment connected with the base station. The base station turns on automatically and starts to transmit FM signals (Auto Power On function). The POWER indicator of the base station lights up. • In some...
Page 46
8 Basic operations Selecting a better reception channel When the playback sound is noisy, you can choose one of the other two channels to transmit signals on the base station. • The white noise may come out when switching the channel. Take off the headphones when switching the channel. 1 Slide the CHANNEL selector on the back side of the base station to select another channel. 2 Press AUTO SCAN on the headphones to tune in to the new channel. 3 Repeat Steps 1 and 2 to select the best...
Page 47
9 Troubleshooting Symptom Cause/Remedy No sound comes out at all. • Turns on the power of the headphones. • Start playback on the AV equipment connected to the base station. • Check the connection between the base station and the AV equipment. • Turns up the volume of the headphones or the connected AV equipment to an appropriate level. • Fully charge the headphones’ battery. No sound comes out from R-channel.• Check the connection between the base station and the AV equipment. • Sound comes...
Page 48
10 Specifications General Specifications Modulation system: Stereo frequency modulation system Carrier frequency: 863.5 MHz (Channel 1) 864.0 MHz (Channel 2) 864.5 MHz (Channel 3) Us abl e are a (distance to reach): Max. 100 m (using JVC measurement systems, under controlled ambient conditions) Frequency response: 25 Hz – 13,000 Hz Distortion: Less than 3% (at 1 kHz) Transmitter (J22321-001) Power requirements: DC 12 V (with the exclusive AC adaptor) Audio input terminals: 3.5 mm dia....
Page 50
© 2006 Victor Company of Japan, Limited Printed in China LNT0068-001A HA-W600RF-B FM CORDLESS HEADPHONES HAW600RF_B.indb 2HAW600RF_B.indb 206.6.26 6:08:07 PM06.6.26 6:08:07 PM